help with xbox

i was going to put flashbios 3.0.3 via http but accidently put a evox bin and then when i turned it on it turns of 3 times then flashes red and green but when i turn off chip it boots good to M$ dashboard what do i do do i have to buy a programmer ?please need help


xbox version: v1.5
dvd drive: thomson
mod-chip:xecuter 2.6 ce

 

You know, my Xbox is doing the same thing right now. I just opened it up one day cause a friend wanted to see if he wanted the Xecuter Chip or not, and When I put it back together, it turns on, then back off 3 or 4 times. I don't know what's going on. I hope someone can answer why this is happening. I thought it was just a wiring problem, but I'm probably wrong.

 

well i hope we can get someone 2 answer us

 

just hit ur eject and power buttons at the same time till u get a purple light then reflash

 

I've Tried pushing both the Power and Eject button at the same time, and I can't get to the BIOS screen to re-flash it. Do the DIP switches have to be a certain way?

 

no they dont its kinda hard to get it but just keep trying u will get it

 

Alright when I get home I'll try it out. Also the yellow wire that goes from one part of the chip to the power buttons (it is located right under the front of the HDD, and DVD Drive) one of them is pinched. Could this be an issue to it not working?

 

yep it could be

 

I just realized that one of the pins from the Solderless adapter wasn't in place. Also one end of the adapter sticks up a little, so maybe if I can make it sit snug, it may start working.

 

do i need a programmer to reflash ?

 

You don't need a programmer to re-flash your Xbox. Just press both the power and eject button so that a pink/purple color turns on, on the DIP switch. That should take you to the BIOS screen, and then you can re-flash by inserting a disc, or by FTPing.

 

i did do the switches have to be in a certain way and does the chip have to be on or off and how many times should i press both of them?

 

I think for the DIP switches you have to have them all off, or on, I'm not sure, but I know that they all have to be on or off. Then press the power and eject button and see if that works. The chip should be on for this to work.

 

you have to have them all to the left and u just have to hit them until the led turn purple you have to press them at the same time
and yes u must have the chip on

 

ya so I got my Xbox up and working. I tried to put the pin back in it's place, but it snapped off. So I just hot glued it back on and the xbox is working fine.

 

well like i said on my first post both banks are black and when i turn my chip on and turn on xbox,,,it turns on then off then does that 2 more times then it just stays on with a black screen flashing red and green on the eject button..so how do i get the flashbios screen again ?

 

just hit the power eject combo

 

i hold both power and eject but my xbox tuns off 3 times by iself then stays put on a black screen then red and green lights flash on eject button so i only get the chance to hit both of them when the xbox stays put

 

Bomb12guy, do you have the Xecuter 3 CE? Because what I figured out is that your chip is probably not on right, or that the pins are not all connected correctly. Make sure that all of your connections are right, and then try turning on your Xbox. I've taken apart my system 5-6 times and finally fixed the problem. It just takes some time.

 

yeah its put on right when i first installed my chip the flashbios screen came up but when i was flashing the chip i was supposed to put flashbios 3.0.3 bin file then i accidently put the evox bin now when i turn on my xbox with chip on it turns of 2 times then flashes red and green on the eject buttton and black screen... but the xbox boots up good to the original dashboard when chips is off so what do i do ? please need help and do i need a programmer and can someone tell me what programmers are used for ?

xbox version v1.5
dvd drive:thomson
modchip: xecuter 2.6CE