How do I extract the drive key?

Discussion in 'Xbox - Software discussion' started by Diablox3, Oct 12, 2009.

Thread Status:
Not open for further replies.
  1. Diablox3

    Diablox3 Member

    Joined:
    Oct 12, 2009
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    So I was attempting to flash my friends xbox, I didnt want to buy anything so I soldered and fried the board. The green light flashes and I need to extract the drive key, but dont know if its possible in this state. I will order another drive to replace it. Can anyone please point me in the right direction or help out? Thx in advance
     
    Diablox3, Oct 12, 2009
    #1
  2. Diablox3

    Diablox3 Member

    Joined:
    Oct 12, 2009
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    And this is a liteon, I heard that they are un-brickable
     
    Diablox3, Oct 12, 2009
    #2
  3. dennisv9

    dennisv9 Regular member

    Joined:
    Jul 31, 2008
    Messages:
    463
    Likes Received:
    0
    Trophy Points:
    26
    as long as the drive still powers on, you need the probe to extract the correct key (for the liteon 74 drives). so if jf recognizes the drive you can get the key of it. assuming off course you didn't erase the firmware on it, then your are scr.....

    for the new 84 drives you don't need a probe anymore, but for that you don't have to solder anyting so you must have a 74 drive

    btw, this is the wrong forum section. go to xbox 360
     
    dennisv9, Oct 16, 2009
    #3
Thread Status:
Not open for further replies.

Share This Page