1- ink Levels are showing Full 2- The printer takes scans ok - Just printing problem - what do I do ? 3- The name of driver I installed is - Full_Webpack-1333-DJ1050_J410_Full_Webpack.exe 4- when I took the color cartridge out I noticed that it was full ,but some of the ink had spilt onto the connection. 5- when I took the Black cartridge out I noticed that it was almost Empty - so the program is Not functioning with the Level indicator either. what should I do ??
Didn't your printer come with an installation disc? If it did, I would reinstall the printer per the instructions. If that fails- I don't know anything about that driver but I suggest going here https://support.hp.com/us-en/driver...t-1050-all-in-one-printer-series-j410/4027462 Make sure it shows your OS correctly, and then download/install that driver.
Okay. When I searched on the driver you provided, the only place I found it wasn't at HP. Did you try what i suggested in regards to reinstalling?
Thinking about this some more, open the HP Printer Assistant and click on Utilities. Click on HP Print and Scan Doctor. If necessary, download and run the Print doctor.
