I am using Nero Essentials 7.3, it does not bring Nero Recode, so i downloaded Nero Recode CE from afterdawn, and it converts wmv videos to digital but then stated burn process failed. I burned it with a Sony first then a Plextor DVD AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 255MB (261620kB) Free physical memory: 61MB (63264kB) Memory in use : 75 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.12.2007 NeroAPI 11:38:59 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 11:38:59 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 11:38:59 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: PLEXTOR DVDR PX-716A running 11:38:59 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:38:59 AM #5 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 11:38:59 AM #6 Text 0 File DlgWaitCD.cpp, Line 290 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1236511 (274:46.61, 2415MB) 11:38:59 AM #7 Text 0 File DlgWaitCD.cpp, Line 302 Write in overburning mode: NO (enabled: CD) 11:38:59 AM #8 Text 0 File DlgWaitCD.cpp, Line 2733 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R Disc Manufacturer ID: AML, Media Type ID: 003, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 11:38:59 AM #9 Text 0 File DlgWaitCD.cpp, Line 474 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:38:59 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1236512 (1236512) = #1236512/274:46.62 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1236512 blocks [E: PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 11:38:59 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2532376576, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1236512 | lead-out | 1 | 0x41 | 0x00 11:38:59 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:38:59 AM #13 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 11:38:59 AM #14 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 11:38:59 AM #15 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 11:38:59 AM #16 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 16x (22,160 KB/s) 11:38:59 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:38:59 AM #18 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: AML..... Media type ID: 003 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 41 4D 4C 00 00 - 00 00 00 30 30 33 00 38 ...AML.....003.8 23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.’_...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:38:59 AM #19 Text 0 File DVDR.cpp, Line 6249 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:38:59 AM #20 CDR -1207 File DVDR.cpp, Line 5896 Book Type automatically set to: DVD-ROM 11:38:59 AM #21 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: No 11:39:07 AM #22 Text 0 File Cdrdrv.cpp, Line 1224 11:39:07.220 - E: PLEXTOR DVDR PX-716A : Queue again later 1:02:39 PM #23 SPTI -1114 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 Buffer x07440000: Len x10000 0x32 B3 09 7E E1 1A 43 EB 6C 56 06 D4 FA 7A 3C 45 0xC4 EE F4 2F F0 FC 44 C9 27 5F F8 AA 37 6E 46 BD 0x49 CE A7 5A 0E 0C 8E E1 B1 FF BD AA AF F1 AF A8 1:02:39 PM #24 CDR -1114 File Writer.cpp, Line 302 Reset occurred E: PLEXTOR DVDR PX-716A 1:02:39 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:02:39 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:02:39 PM #27 SPTI -1066 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 1:02:39 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 291 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 1:02:39 PM #29 Text 0 File DVDR.cpp, Line 6249 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD-ROM Changing the Book Type was finished successfully, return code 0 1:02:39 PM #30 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command E: PLEXTOR DVDR PX-716A 1:02:39 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 1:02:39 PM #32 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 9, size=102656 bytes, created 5/30/2006 3:18:18 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 9, size=29568 bytes, created 5/30/2006 3:18:38 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 9, size=9984 bytes, created 5/30/2006 3:19:12 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 13:02:40 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 13:02:40 File burn_ndigital.cpp, Line 200 NeroDigital: exit What did i do wrong or do i have too little memory. My firewall and Anti-Virus take up most of my memory.
It is recommended to have a minimum of 512mb RAM to burn DVDs , suggest you add a further 256mb. Try slowing your burn to 4X Also I would suggest better quality discs, Verbatim or Sony (made in Japan)
