Well i really dont understand anything about this kind of stuff, all i know is i used to burn my animes onto dvds and now i get this error with same program(nero6) and same dvds i used before. Any help is appreciated ^^; Log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-09-1999 12:06:00 ahead WinASPI: File 'C:\Programas\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 18:35:34 Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.16 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 1 DMA: On DiskPeripheral : Maxtor 6Y120M0 YAR5 viamraid Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-3500AG D: CDRom0 HL-DT-ST CD-RW GCE-8526B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522988kB) Free physical memory: 113MB (115840kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.2.2008 ISO compilation 21:11:39 #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:11:39 #2 Text 0 File Reader.cpp, Line 127 Reader running 21:11:39 #3 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 21:11:39 #4 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 21:11:39 #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2053919 (456:25.44, 4011MB) 21:11:39 #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 21:11:39 #7 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R Disc Manufacturer: DAXON0 - 16S Disc Application Code: 64, Disc Physical Code: 193 21:11:39 #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:11:39 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2053920 (2053920) = #2053920/456:25.45 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2053920 blocks [_NEC DVD_RW ND-3500AG] -------------------------------------------------------------- 21:11:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4206428160, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2053920 | lead-out | 1 | 0x41 | 0x00 21:11:39 #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 21:11:39 #12 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 21:11:39 #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 21:11:39 #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3.324 KB/s) 21:11:39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:11:39 #16 Text 0 File DVDR.cpp, Line 2340 Recording mode: Sequential Recording Mode 21:11:39 #17 Text 0 File Mmc.cpp, Line 21627 Set BUFE: Buffer underrun protection -> ON 21:11:39 #18 Text 0 File DVDR.cpp, Line 2494 Start write address at LBA 0 DVD high compatibility mode: Yes 21:11:39 #19 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:11:39 #20 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1F 0x57 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 21:11:39 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1763 Illegal disc 21:11:39 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763 Could not perform start of Disc-at-once 21:11:39 #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3.324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 07-03-2007 22:51:00 File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10-09-1999 12:06:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 07-03-2007 22:51:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 21-09-2004 11:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Newer firmware for your burner at the links below: http://liggydee.cdfreaks.com/page/en/NEC-ND-3500A/ http://forum.rpc1.org/dl_firmware.php?download_id=1904 Pretty low quality media. Verbatim is the most easy-to-come-by good quality media imo. The CDRALW2K driver is a Roxio driver that can sometimes interfere with Nero's ability to burn. Use the Roxio Zap tool to remove it unless you also use Roxio software. http://tools.roxio.com/support/tools/roxizap.exe You might also try using Nero to create an image file instead of burning directly to disk. Try using ImgBurn (free) to burn the created image to disk. http://www.imgburn.com I'd also edit your original post to remove your Nero serial number in its entirety. Click the paper/pencil icon in the uper right of your post to enter edit mode.
I agree with everything that Laddyboy mentioned.... just adding a good web page to download the latest firmware for your drive: http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=998 version 2.1b is the latest version for your drive. also: Firmware is programming that is inserted into a programmable memory area of your drive, thus becoming a permanent part of a drive. This 'software' is called firmware and can be updated with a firmware flasher. A firmware upgrade can add new functionality to your drive. Also bug fixes and improvements are done by firmware upgrades. It also adds more media codes and write strategies to the drive to improve burning capabilities and disk recognition. since you have very OLD firmware your drive will find it hard to write to the newer media found today! Without doing a firmware update your chances of burning successfully is limited. Do the firmware update. ALSO: more RAM would do wonders for Nero to work! Cut down on multi tasking, internet, and even shut down anti virus while working with Nero! Update your Nero to version 6.6.1.15a Here's how: Before udating to 6.6.1.15a save the serial #, uninstall Nero, then use the cleaning tools : http://www.nero.com/eng/support-nero6-tools-utilities.html then do a registry clean up - free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot! update to Nero 6.6.1.15a, install Package 1 and Package 2 only: http://www.nero.com/eng/downloads-nero6-update.php Install Package 1 & 2 ONLY! reboot and you're good to go!
