Help! This is my log and it always just stops at 6% P5LD2 1C82-0000-19E5-MAAX-4000-7281-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0 Recorder: <PIONEER DVD-RW DVR-112D>Version: 1.21 - HA 1 TA 0 - 7.2.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <PIONEER DVD-RW DVR-112D>Version: 1.21 - HA 1 TA 0 - 7.2.7.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JD-00HBB0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-112D E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1535MB (1572140kB) Free physical memory: 349MB (357564kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.3.2008 CueSheet PM 01:52:49 #1 Text 0 File Burncd.cpp, Line 3091 PIONEER DVD-RW DVR-112D Buffer underrun protection activated PM 01:52:49 #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 81920KB of Memory PM 01:52:49 #3 Text 0 File Reader.cpp, Line 124 Reader running PM 01:52:49 #4 Text 0 File Writer.cpp, Line 113 Writer E: PIONEER DVD-RW DVR-112D running PM 01:52:49 #5 Text 0 File Burncd.cpp, Line 3405 Turn on Disc-At-Once, using CD-R/RW media PM 01:52:51 #6 Text 0 File DlgWaitCD.cpp, Line 298 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 290097 ( 64:29.72) PM 01:52:51 #7 Text 0 File DlgWaitCD.cpp, Line 310 Write in overburning mode: NO (enabled: CD) PM 01:52:51 #8 Text 0 File DlgWaitCD.cpp, Line 2842 Recorder: PIONEER DVD-RW DVR-112D; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid) PM 01:52:51 #9 Text 0 File DlgWaitCD.cpp, Line 482 >>> Protocol of DlgWaitCD activities: <<< ========================================= PM 01:52:51 #10 Text 0 File ThreadedTransferInterface.cpp, Line 848 Setup items (after recorder preparation) 0: TRM_DATA_RAW_MODE1 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 290098 (290098) = #290098/64:27.73 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_RAW_MODE1, 2352, config 0, wanted index0 0 blocks, length 290098 blocks [E: PIONEER DVD-RW DVR-112D] -------------------------------------------------------------- PM 01:52:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1063 Prepare recorder [E: PIONEER DVD-RW DVR-112D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_RAW_MODE1, 2352/0x00, FilePos 0 352800 682663296, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 290098 | -150 | 0x00 0 | 1 | 1 | 0x41 | 290098 | 0 | 0x00 290098 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 PM 01:52:51 #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME PM 01:52:51 #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started PM 01:52:51 #14 Text 0 File Burncd.cpp, Line 4236 Cache writing successful. PM 01:52:51 #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed PM 01:52:52 #16 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (600 KB/s) PM 01:52:52 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2722 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 PM 01:52:52 #18 Text 0 File MMC.cpp, Line 17488 StartDAO : CD-Text - Off PM 01:52:52 #19 Text 0 File MMC.cpp, Line 22122 Set BUFE: Buffer underrun protection -> ON PM 01:52:52 #20 Text 0 File MMC.cpp, Line 17716 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 11 00 00 00 00 41 01 01 11 00 00 02 00 41 aa 01 14 00 40 1d 49 PM 01:52:54 #21 Text 0 File Cdrdrv.cpp, Line 1230 13:52:54.828 - E: PIONEER DVD-RW DVR-112D : Queue again later PM 01:53:11 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 01 95 00 00 1B 00 00 00 Sense Area: 0x71 00 03 00 97 54 14 0E 00 00 00 00 0C Buffer x0ae00000: Len xf810 0x00 FF FF FF FF FF FF FF FF FF FF 00 00 07 30 01 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 PM 01:53:11 #23 CDR -1135 File Writer.cpp, Line 302 Write error E: PIONEER DVD-RW DVR-112D PM 01:53:11 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion PM 01:53:11 #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader PM 01:53:11 #26 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (600 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
+ Update your firmware for your burner to 1.24 you're using too much RAM .... shut down all unnecessary programs running in the background, do not multi task, no internet, and even shut down your anti virus programs while burning. you are using crappy media.... try some Taiyo Yuden or Verbatim disks. Using good media stops many problems! when you're having problems you can't count out the media that you are using even if it worked before for you! Crappy media will eventually cause you problems! You won't have any problems using Taiyo Yuden or Verbatim! at least these disks won't be your problem! use a better version of Nero: Save your serial # then uninstall Nero! Use the cleaning tool: Nero7 Clean tool http://www.nero.com/enu/support-nero7-tools-utilities.html do a registry clean up using this free cleaner: CCleaner: http://www.ccleaner.com/download then do a defrag and reboot! now reinstall Nero 7.10.1.0: http://www.filehippo.com/download_nero_7_premium/?2893 **030C00 Write error There are many cases where there is a problem with the disc, or information cannot be retrieved from the disc properly. The PC may be unstable or try a new disc. hope this helps..... good luck..... welcome to afterdawn.
Windows XP 5.1 IA32 WinAspi: - <---- also no ASPI driver location?? not sure on v7 logs it shows its in or not? NT-SPTI used Nero Version: 7.2.7.0 Internal Version: 7, 2, 7, 0
@Rotary, That depends on the particular version of Nero that is being used, so do ...some dont. 7.2.7.0 wasn't one of the "good" versions
