Hi, Tried two different types of DVD-R (TDK and Traxdata) both give Illegal Disk errors in Nero 7, iv'e updated my drive's firmware to 1.0c and installed system ASPI (whatever that is). Any ideas as to how i can get this working would be appreciated. Many thanks. Log: MaxMouse SoulSource EC81-10C7-1954-X3CX-4003-7E85-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.0C - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SV6003H atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON LTR-24102B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-1300A E: CdRom0 LITE-ON LTR-24102B F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 669MB (685956kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.7.2007 ISO compilation 08:16:19 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 08:16:19 #2 Text 0 File Isodoc.cpp, Line 6666 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 08:16:19 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 08:16:19 #4 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 08:16:19 #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 405663 ( 90:08.63, 792MB) 08:16:19 #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 08:16:19 #7 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 08:16:19 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 08:16:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 405664 (405664) = #405664/90:8.64 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 405664 blocks [E: _NEC DVD_RW ND-1300A] -------------------------------------------------------------- 08:16:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 830799872, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 405664 | 0 | 0x00 405664 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 08:16:19 #11 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 08:16:19 #12 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 08:16:19 #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 08:16:19 #14 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 08:16:19 #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 08:16:19 #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 08:16:20 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 08:16:20 #18 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 08:16:20 #19 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 08:16:20 #20 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 08:16:20 #21 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 06 30 A0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 08:16:20 #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752 Illegal disc E: _NEC DVD_RW ND-1300A 08:16:20 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752 Could not perform start of Disc-at-once 08:16:20 #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 08:16:20 #25 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11,080 KB/s) 08:16:20 #26 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 08:16:20 #27 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 08:16:20 #28 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The only thing I can recommend is slowing your burn speed to 4X...everything else looks OK (except I dont like Ritek discs)
i tried slowing the burn to 1x before posting here, i'm thinking it MUST be the disks.. because if it isn't then it has to be the writer itself
