I can't burn DVD with ImageBurn soft. ImageBurn gives me message (unable to recover TOC) Here is the log I 13:59:40 ImgBurn Version 2.3.2.0 started! I 13:59:40 Microsoft Windows XP Professional (5.1, Build 2600) I 13:59:40 Total Physical Memory: 253,464 KB - Available: 119,292 KB I 13:59:40 Initialising SPTI... I 13:59:40 Searching for SCSI / ATAPI devices... I 13:59:41 Found 1 CD-ROM and 1 DVD-RW! Please help.
Ok - This part of the log is the part when ImgBurn is opened. The rest of the log has like your drives, firmware version, media you're using and burn speed which can be helpful. So post back that info. For the drive info just open ImgBurn and on the right hand side will be the make, model & firmware version of the drive.
O, this one. TOSHIBA DVD-ROM SD-R5002 1S33 (ATA) Current Profile: N/A Burn speed:1X. I can't actually get to the burning stage because DVD ROM can't recover TOC. I'm using Sony DVD as well as Memorex. Both work fine with my office burner. My settings are OK as well.
alexv11, That drive is really, really Old. I would just replace it as you can get the newer DVD Burners for under $40.00 US The firmware has not been updated in 3+ years and it will have problems recog. the newer disks and burning them properly.
