Hi everybody. I had XP and all worked fine, I upgraded to Vista, and now am unable to burn a dvd video. If I burn a CD data backup, it works ok. If I do a simulate or an actual burn for the dvd video option, it fails. I am very sure it is not a media issue, I am part of the way thru a pack that was working perfectly while on XP, they are Verbatim dvd-r 8x. I have verified all updates today (windows, Nero, and burner firmware). I have powerdvd78 installed and it playsback movies perfectly so any codecs that may be needed are installed. Here is the logfile: Code: Windows XP 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <PLEXTOR DVDR PX-716A> Version: 1.11 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PLEXTOR DVDR PX-716A >Version: 1.11 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === : MAXTOR STM3200820AS 3.AA nvstor32 Port 2 ID 0 DMA: Off === CDRom-Device-Map === PLEXTOR DVDR PX-716A E: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1047488kB) Free physical memory: 389MB (399344kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.9.2007 UDF/ISO compilation 2:57:26 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 2:57:27 AM #2 Phase 112 File dlgbrnst.cpp, Line 1762 DVD-Video files reallocation started 2:57:27 AM #3 Phase 114 File dlgbrnst.cpp, Line 1762 DVD-Video files reallocation completed (no file modified) 2:57:27 AM #4 Text 0 File Isodoc.cpp, Line 6666 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:57:27 AM #5 Phase 111 File dlgbrnst.cpp, Line 1762 DVD-Video files sorted 2:57:27 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 2:57:27 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 2:57:27 AM #8 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 2:57:27 AM #9 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286543 (508:07.18, 4465MB) 2:57:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 2:57:27 AM #11 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 2:57:27 AM #12 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:57:27 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286544 (2286544) = #2286544/508:7.19 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286544 blocks [E: PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 2:57:27 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682842112, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2286544 | 0 | 0x00 2286544 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 2:57:27 AM #15 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 2:57:28 AM #16 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 2:57:28 AM #17 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 2:57:28 AM #18 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 2:57:28 AM #19 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 2:57:28 AM #20 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 2:57:28 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:57:28 AM #22 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 2:57:28 AM #23 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 2:57:28 AM #24 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:57:28 AM #25 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 2:57:29 AM #26 Text 0 File Cdrdrv.cpp, Line 1352 02:57:29.300 - E: PLEXTOR DVDR PX-716A : Queue again later 2:57:30 AM #27 Text 0 File Cdrdrv.cpp, Line 1352 02:57:30.065 - E: PLEXTOR DVDR PX-716A : Queue again later 2:57:38 AM #28 Text 0 File Cdrdrv.cpp, Line 1352 02:57:38.675 - E: PLEXTOR DVDR PX-716A : Queue again later 2:58:08 AM #29 SPTI -1064 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 00 00 00 00 60 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02 Buffer x0a0c0100: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2:58:08 AM #30 CDR -1064 File Writer.cpp, Line 303 Invalid block address E: PLEXTOR DVDR PX-716A 3:01:27 AM #31 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 95 (5Fh) 3:01:27 AM #32 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5,540 KB/s) 3:01:28 AM #33 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:01:33 AM #34 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 3:01:33 AM #35 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
No ASPI layer! this is an ATAPI error: 05 21 02 although your specific problem (02) is not listed it's the same POSSIBLE CAUSE. Something within the system..... recommendation......reinstall ASPI layer: This is for Windows XP..... Check out ASAPI layer for Vista http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm
Run Nero Info Tool and check that the Nero ASPI is present. I don't have Windows ASPI installed, but the Nero ASPI location is listed at the beginning of the log, thus:
sorry I don't know what else to tell you other than your Nero might have to be deleted then reinstalled for it to work, since you did a Vista update on your computer. It's worth a try! Save your Serial #! make sure when you do an uninstall to use the Nero Cleaner: http://www.nero.com/nero7/eng/Nero_7_Clean_Tool.html after cleaning out the uninstall then do a registry clean up and reboot..... then reinstall your Nero.... and add your serial #. try again. see if this helps.
I thought about the aspi layer since I had to install for XP, but I read that Vista didn't really need one, but after you pointed that out, I searched and found that frogaspi offers a wnaspi32.dll that can used for vista,I copied to the system32 folder, restarted pc and ran a simulation again and it still shows no aspi in the log file. How do I get Nero to recognize the dll sitting there? And for the post about checking in Nero InfoTool, when you run it, where do you find that at? What tab is it on?
