Ok so I've been trying to burn .avi files using Nero 7 Ultra Edition and at first it would burn for a while then it would pop up and say "Burn process failed at 2x (2770,KB/s)". After a while I couldn't get more than 5% done burning and it would pop up saying the same thing. In the display area it tells me "Invalid block address D: HL-DT-ST DVDRAM GSA-4082B". I've looked through some other threads and saw that other people have had the same problem and I did the things that they did but it still isn't working. Also, I don't think it's just nero, I've also tried using RecordNow! Deluxe and it was telling me to insert a blank dvd into the drive, when there was already one in there. I'm attatching a copy of my log from Nero hopefully someone knows a bit more about things than I do because I can not figure this out and it's driving my NUTS!! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 6:01:02 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A209 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4082B>Version: A209 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B atapi Port 1 ID 1 DMA: On DiskPeripheral : fasttx2k Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4082B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048096kB) Free physical memory: 516MB (528664kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.2.2008 ISO compilation 9:09:04 PM #1 Text 0 File Isodoc.cpp, Line 6424 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:09:04 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 9:09:04 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:09:04 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4082B running 9:09:04 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:09:04 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 9:09:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 358895 ( 79:45.20, 700MB) 9:09:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:09:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 9:09:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:09:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358896 (358896) = #358896/79:45.21 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358896 blocks [D: HL-DT-ST DVDRAM GSA-4082B] -------------------------------------------------------------- 9:09:04 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 735019008, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 358896 | lead-out | 1 | 0x41 | 0x00 9:09:04 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:09:04 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:09:04 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 9:09:04 PM #16 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 9:09:04 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 9:09:04 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2x (2,770 KB/s) 9:09:04 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:09:04 PM #20 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode for Multisession 9:09:05 PM #21 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: No 9:09:05 PM #22 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:09:31 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 32 4D 03 0C 0C Buffer x04da2000: Len xc 9:09:31 PM #24 SPTI -1064 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02 Buffer x061c0000: Len x10000 0xDD E9 81 60 01 7E C1 B1 B0 6F 18 CC 88 50 41 71 0x00 46 68 2E 60 52 C3 B1 3F FF FF FF FA D7 FF FF 0xFF FD D2 36 88 00 0C 0A 00 14 01 CF 88 3F 39 0D 9:09:31 PM #25 CDR -1064 File Writer.cpp, Line 302 Invalid block address D: HL-DT-ST DVDRAM GSA-4082B 9:09:31 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:09:31 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:09:31 PM #28 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 31 9:09:33 PM #29 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 9:09:33 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.68a, size=20176 bytes, created 1/21/2004 2:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I forgot to mention that somewhere in the middle of trying over and over again for hours and hours on end, Nero did let me burn one dvd which actually completed 100% and worked. I know it wasn't the file because it wasn't working but I just kept trying until it did, but since then no luck again. I don't think I did anything different to make it work that one time, but I don't know.... Anyone have any idea???
ASPI layer is corrupted, try this, version 4.71 from here - http://www.afterdawn.com/software/cdr_software/cdr_tools/aspi.cfm This is not a good version of Nero, update to 7.10.1.0 from here http://www.filehippo.com/download_nero_7_premium/?2893 Burn at 4X
Still nothing, and when I tried to install the new nero it uninstalled my old one and now the new version says that my serial number is incorrect and wont let me finish installing it, so now I have no nero at all.
If you have a legit serial number then Nero will accept it......submit another log of your new failed burn.
Well I do have a legit serial number but I still can't get nero to work, but right now that's not my problem. I tried burning using Sonic RecordNow! Deluxe and it still wont work either but I can't find the burning logs anywhere. All I get when it fails is: "There was a problem writing to the disk..." and when I click explain it just tells me there is a recording error, and when I click advanced it gives me this: "Sense: 03 ASC: 0C ASCQ: 00 (Command 35) ------------------------------------------------------- Px.dll: 1.7.46.500 pxdrv.dll: 1.0.61.2 PxMas.dll: 1.7.46.500 PxWave.dll: 1.7.46.500 PXWMA.dll: 1.0.0.3"
