i finally got my dvd burner to work, but it takes 4 takes just to burn 1 dvd, because of this error. i've used my bad quality Imation disc's and have gotten the same amount of burns and fails as my good quality Verbatim disc's. i use nero burning rom to burn, and i'd like to know if anyone knows how to fix this because it's extremely frustrating. here is one of the logs i saved: 1C80-0000-19E5-MA2X-4007-3469-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.2 Internal Version: 7, 10, 1, 2 Recorder: <PIONEER DVD-RW DVR-112D>Version: 1.24 - HA 1 TA 0 - 7.10.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 1 - 7.10.1.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-00JHC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-112D atapi Port 3 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-112D E: CdRom0 NERO IMAGEDRIVE2 F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 38797312 (0) Byte BUFE : 0 Physical memory : 238MB (244464kB) Free physical memory: 97MB (99812kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.1.2008 Burn DVD Image 3:09:43 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 3:09:43 AM #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 3:09:43 AM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2137151 (474:55.26, 4174MB) 3:09:43 AM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 3:09:43 AM #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: PIONEER DVD-RW DVR-112D, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 3:09:43 AM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:09:43 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2137152 (2137152) = #2137152/474:55.27 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2137152 blocks [E: PIONEER DVD-RW DVR-112D] -------------------------------------------------------------- 3:09:43 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: PIONEER DVD-RW DVR-112D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4376887296, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2137152 | 2137152 | 0x00 2137152 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 3:09:43 AM #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 3:09:43 AM #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 3:09:43 AM #11 Phase 32 File dlgbrnst.cpp, Line 1762 Simulation started at 4x (5,540 KB/s) 3:09:55 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:09:55 AM #13 Text 0 File DVDR.cpp, Line 3229 Recording mode: Sequential Recording Mode 3:09:55 AM #14 Text 0 File DVDR.cpp, Line 3385 Start write address at LBA 0 DVD high compatibility mode: Yes 3:09:55 AM #15 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x0619d880: Len x648 3:09:55 AM #16 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:09:55 AM #17 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 38769600 3:09:56 AM #18 Text 0 File Cdrdrv.cpp, Line 1352 03:09:56.250 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #19 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.218 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #20 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.265 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #21 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.265 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #22 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.296 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #23 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.343 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #24 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.390 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #25 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.406 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #26 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.421 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #27 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.437 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #28 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.453 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #29 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.468 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #30 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.484 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #31 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.500 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:16 AM #32 Text 0 File Cdrdrv.cpp, Line 1352 03:10:16.500 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:26 AM #33 Text 0 File Cdrdrv.cpp, Line 1352 03:10:26.265 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:26 AM #34 Text 0 File Cdrdrv.cpp, Line 1352 03:10:26.312 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:27 AM #35 Text 0 File Cdrdrv.cpp, Line 1352 03:10:27.468 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:27 AM #36 Text 0 File Cdrdrv.cpp, Line 1352 03:10:27.484 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:32 AM #37 Text 0 File Cdrdrv.cpp, Line 1352 03:10:32.890 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:32 AM #38 Text 0 File Cdrdrv.cpp, Line 1352 03:10:32.937 - E: PIONEER DVD-RW DVR-112D : Queue again later 3:10:35 AM #39 SPTI -1064 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 00 00 00 CA 40 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02 Buffer x08826d40: Len x10000 0x00 00 01 BA 44 0B 05 4E 04 EB 01 89 C3 F8 00 00 0x01 E0 07 EC 80 00 0D FF FF FF FF FF FF FF FF FF 0xFF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 3:10:35 AM #40 CDR -1064 File Writer.cpp, Line 303 Invalid block address E: PIONEER DVD-RW DVR-112D 3:10:37 AM #41 Text 0 File DVDR.cpp, Line 3787 EndDAO: Last written address was 51775 (CA3Fh) 3:10:43 AM #42 Phase 34 File dlgbrnst.cpp, Line 1762 Simulation failed at 4x (5,540 KB/s) 3:10:44 AM #43 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:10:48 AM #44 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 3:10:48 AM #45 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Jake, I think you have posted in another thread a while ago, and probably were suggested to get more RAM: 238MB not nearly enough. You could try ImgBurn, maybe it requires less RAM, however, you need to install another at least 200MB or so.
yeah i did post in another thread and i did buy more memory and it turned out to not work and they won't refund my money so yeah kinda screwed on the memory right now.
apparently so. see my other computer in my house is the same exact model and has an extra 512 mb of ram, but they won't let me put my dvd burner in their computer because i have my own, and i bought the same exact model as the one my other computer has and they sent me a different product, but said because it was on sale i can't get a refund.
yeah i know i called customer service and they think im trying to scam them or something i don't know but it sucks because i'll probably never get this burner to burn dvd's in one try till i get more memory huh?
