Invalid Field in Command / Invalid Track Info

Can someone help me figure out how to get through these errors. I have NERO and have burning without problems and now all kinds of errors are coming up. These are the most recent two errors

"Invalid Field in Command"

and

"Invalid Track Info"

THANKS

 

Can you post a Nero burn log?

 

I am having the same problem. I have been using Nero for the longest time and now all of the sudden I am getting the error message invalid field in command. The only things I did recently were d/l xp updates and java updates. I figured that might be the problem so I went to an earlier restore point but I am having the same problem. Can anyone help me figure out what's going on?

 

Like Fasfrank said,

 

Okay here is my log file from Nero.


JodyEmbler
MindFaZer INC.


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 8:49:52 AM
Nero version: 6.3.0.0 (Nero Express)
Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 1 - 6.3.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 1 - 6.3.0.0
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160 F: CDRom0
SONY DVD RW DRU-530A G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 352MB (361448kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.5.2005
===== Disc-Copy over image - 1st step : Copy to image ...

10:34:50 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

10:34:50 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

10:34:50 PM #3 Text 0 File DVDCopy.cpp, Line 241
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2287824 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

10:34:50 PM #4 Text 0 File DVDCopy.cpp, Line 334
Max -1 tracks of 1 allowed to copy
1: 0 - 2287824 = 2287824, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:34:50 PM #5 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media

10:34:51 PM #6 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2147483646 (477218:35.21)
Last address to be written: 2287823 (508:24.23)

10:34:51 PM #7 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

10:34:51 PM #8 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

10:34:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:34:51 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2287824 (2287824) = #2287824/508:24.24
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287824 blocks [ Image Recorder ]
--------------------------------------------------------------

10:34:51 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4685770752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287824 | lead-out | 1 | 0x00 | 0x41

10:34:51 PM #12 Phase 120 File dlgbrnst.cpp, Line 1800
Creating the image for burning

10:34:51 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:47:54 PM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2287824 (22E8D0h), lenght 0 blocks

10:47:54 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:47:56 PM #16 Phase 121 File dlgbrnst.cpp, Line 1800
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

10:48:13 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

10:48:13 PM #2 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-530A running

10:48:14 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 363
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 390803456
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:24.24 ( 2287824)
MTYP: Mediumtype = DVD (old format) (0x1C)

10:48:15 PM #4 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media

10:49:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2297887 (510:38.37)
Last address to be written: 2287823 (508:24.23)

10:49:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

10:49:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: SONY DVD RW DRU-530A, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

10:49:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

10:49:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2287824 (2287824) = #2287824/508:24.24
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287824 blocks [SONY DVD RW DRU-530A ]
--------------------------------------------------------------

10:49:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-530A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4685463552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287824 | lead-out | 1 | 0x00 | 0x41

10:49:25 PM #11 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

10:49:25 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:49:25 PM #13 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:10,891 (850891ms) -> OK

10:49:25 PM #14 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

10:49:25 PM #15 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Power-Burn -> ON

10:49:25 PM #16 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

10:49:25 PM #17 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:54:12 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x059B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x09 0x80 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

10:54:12 PM #19 CDR -1066 File Writer.cpp, Line 301
Invalid field in command

10:54:13 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:54:15 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:54:15 PM #22 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 622591

10:54:19 PM #23 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:54:20 PM #24 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

10:54:20 PM #25 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 10/9/2003 12:27:20 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

you got this

and Nero says this

13. I get a 'SCSI target error' when using Nero/Nero Express. How do I resolve this problem?

This error be caused by the following:

* Normally caused by CD-R or CD-RW media the recorder is unable to work with. Or the media could be defective, dirty or just not compatible with the recorder.
* Cables are known to cause this: loose cables, damaged cables, loose power connectors, etc.
* Defective recorders are known to cause this. Test with another demo software to rule out software as the cause. If two software programs have the same symptom, your recorder may need service.
* If the drive is being polled by another software's driver, it could hang the bus. Uninstall any other CD recording software you may have had on your system, as well as Nero. Then use Registry cleaner software to clean you registry. At last try a fresh install of our latest Nero release.

 

Thank you for the help. I will try another shareware program and if that doesn't work I will just go and buy another burner.

 

WHOA! Don't go buying a new burner just yet! Get some different discs. Better ones. If you buy in a store I hear Verbatim discs are good, if you buy online go with Taiyo Yuden.

Check out a firmware update if there is one. Go to the manufacturers website and get one there. Just make sure you get the right one for your model burner.

 

Hello everybody.
I have almost the same problem with burning CD's. Everything before was ok and I had no problem with burning but since I reinstall my Win XP sp2 I got problems. Here it is my Nero log:
--------------------------------------------------------------------
kdn
vdko


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 18:35:34
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d

Recorder: <TEAC CD-W552E> Version: 1.14 - HA 1 TA 1 - 6.6.0.14
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC CD-ROM CD-3002A >Version: C000 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : TEAC CD-W552E 1.14 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC CD-ROM CD-3002A C000 nvidesm Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
_NEC CD-ROM CD-3002A F: CDRom1
TEAC CD-W552E E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 648MB (663912kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.6.2005
CD-ROM (ISO)
01:25:53 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

01:25:53 #2 Text 0 File Burncd.cpp, Line 2945
TEAC CD-W552E
BURN-Proof activated

01:25:53 #3 Text 0 File Reader.cpp, Line 127
Reader running

01:25:53 #4 Text 0 File Writer.cpp, Line 122
Writer TEAC CD-W552E running

01:25:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

01:25:53 #6 Text 0 File Burncd.cpp, Line 3230
Turn on Track-At-Once, using CD-R/RW media

01:25:53 #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 357964 ( 79:34.64)

01:25:53 #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

01:25:53 #9 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: TEAC CD-W552E;
CDR code: 00 97 25 35; OSJ entry from: INFODISC Technology Co., Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

01:25:53 #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

01:25:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 357965 (357965) = #357965/79:32.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357963 blocks [TEAC CD-W552E]
--------------------------------------------------------------

01:25:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TEAC CD-W552E] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733419520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
357965 | lead-out | 1 | 0x41 | 0x00

01:25:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 357965 -> 357963.

01:25:53 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

01:25:53 #15 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

01:25:53 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

01:25:53 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)

01:25:53 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

01:25:53 #19 Text 0 File Mmc.cpp, Line 21592
Set BUFE: BURN-Proof -> ON

01:26:00 #20 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x045C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

01:26:04 #21 SCSI -1066 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04BF0200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

01:26:04 #22 CDR -1066 File Writer.cpp, Line 311
Invalid field in command

01:26:04 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

01:26:04 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

01:26:08 #25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
TEAC CD-W552E\H1 T1

01:26:08 #26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

01:26:08 #27 Text 0 File Mmc.cpp, Line 16240
<TEAC CD-W552E > start Close Session

01:26:28 #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Can someone help me or just give me an idea where should I look for the reasones?
Thank you in advance.

 

Your DMA is off on all your drives, you should turn it on for your burner. Go into device manager and uninstall your burner (right-click My Computer, Properties, Hardware, Device Manager). Then reboot your computer and it should install it right away and you should be in DMA mode.

If the DMA thing doesn't work, try changing media. Avoid Memorex, I suggest Verbatum with Super AZO Dye (should say it on the box).

 

"Your DMA is off on all your drives, you should turn it on for your burner. Go into device manager and uninstall your burner (right-click My Computer, Properties, Hardware, Device Manager). Then reboot your computer and it should install it right away and you should be in DMA mode."

I tried this before but it didn't work. I uninstalled my burner from the Device Managger - rebooted the PC, then installed the new firmware and nothing happends. It was not the first time when I install the firmware. Is it possible if this is the reasone the burner not to work? Because I read somewhere how to turm on my DMA mode true the Device Menager component's properties but I have no such a properties in my Device Menager component.
-------------------------------------------------------------------
If the DMA thing doesn't work, try changing media. Avoid Memorex, I suggest Verbatum with Super AZO Dye (should say it on the box).

I never use Memorex. Usualy I use Verbatum or LG media.

 

@creaky

Thank you for the detailed description about DMA. I'll try this later because I'm not at home but in the office where I work.

As I remeber I was looking for this chanels (Primary and Secondary IDE Chanels) in my Device Manager and I had no such chanels But I'll try this again and will post the results.
-----------------------------------------------------------------------
Thank you for the advice about the serial. I deleted it.

 

hi, i had the same error, this is my log :
"Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS00 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.13
Adapter driver: <xmasscsi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-00CXA0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 52MB (53692kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.6.2005
ISO compilation
2:12:56 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:12:57 #2 Text 0 File Reader.cpp, Line 127
Reader running

2:12:57 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running

2:12:57 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

2:12:57 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

2:12:57 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2143471 (476:19.46, 4186MB)

2:12:57 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

2:12:57 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

2:12:57 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:12:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2143472 (2143472) = #2143472/476:19.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143472 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------

2:13:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389830656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2143472 | lead-out | 1 | 0x41 | 0x00

2:13:25 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

2:13:25 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

2:13:25 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

2:13:25 #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

2:13:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:16:28 #17 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2143472 (20B4F0h), lenght 0 blocks

2:16:28 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:16:28 #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 17.2x (23.794 KB/s)

2:16:28 #20 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11.080 KB/s)

2:16:28 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:16:28 #22 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

2:16:28 #23 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Super Link -> ON

2:16:28 #24 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

2:16:28 #25 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:16:45 #26 Text 0 File Cdrdrv.cpp, Line 1288
02:16:45.640 - TSSTcorp CD/DVDW TS-H552B\H1 T1 : Queue again later

2:29:55 #27 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2143472 (20B4F0h), lenght 0 blocks

2:29:55 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:29:55 #29 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2143471

2:30:17 #30 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11.080 KB/s)

2:30:18 #31 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)

2:30:18 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:30:18 #33 CDR -1066 File ThreadedTransferInterface.cpp, Line 1735
Invalid field in command

2:30:18 #34 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1735
Invalid track info

2:30:18 #35 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 16/06/2004 0:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)"

what's the problem?
thks a lot

 

You should also have an ASPI layer for Windows as well as an Ahead ASPI. Here's something explaining a bit about ASPI:

[bold]<11>What is ASPI and do I need it?
The term 'ASPI' is an acronym that stands for: Advanced SCSI Programming Interface. All the following terms are synonymous: ASPI layer, ASPI drivers, ASPI interface. The term 'SCSI' [scuzzy] is an acronym that stands for Small Computer Systems Interface. An ASPI layer consists of four files that 'lie between' various programs [software] and certain devices, such as CD/DVD-ROM drives and CD/DVD burners/writers [hardware]. Software programs such as CD digital audio extractors [commonly known as 'Rippers'] and CD-writing utilities such as CDRWin use/require ASPI drivers to 'communicate with' SCSI devices. Many people don't realize however, that the files contained in an ASPI layer are also used in systems that *don't* contain a SCSI adapter, or SCSI devices .. for things such as ripping CD audio and burning CD/DVDs.
ASPI DOWNLOAD http://www.adaptec.com/worldwide/su...duct/ASPI-4.70&filekey=aspi_471a2.exe&sess=no[/bold]

Your memory useage should be around 50% or so. Try to shut down some background programs running, such as Antivirus stuff, and don't multitask while burning.

It appears you are trying to burn a multisession disc. If you're burning a DVD movie, do not use multisession. If you chose to burn DVD-Video files, this should be disabled unless you enabled it yourself. If you are making an ISO disc, you will need to disable multisession manually. This is probably a big part of your problem.

Then your simulation goes OK (says completed successfully), but your burn fails as soon as you start it. So you might have some poor quality media on your hands. What kind of media are you using??

Also, I have no clue what firmware you are using, so here's a link for updating that just in case: http://www.samsung.com/au/support/p...u/module/ssi/right/rmenu_opticaldiskdrive.sec

 

thks for the beginning, i use a burner "writemaster" for dvd +/-
and a i try to burn on a EMTEC DVD -R
sry my english is poor i am french

EDIT: i installed programs u said me, i tryed again but i had the same error. I give you the new log :
"Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.13
Adapter driver: <xmasscsi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-00CXA0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552B E: CDRom3
AXV CD/DVD-ROM F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 225MB (230824kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.6.2005
ISO compilation
5:08:02 #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:08:02 #2 Text 0 File Reader.cpp, Line 127
Reader running

5:08:02 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552B running

5:08:02 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

5:08:02 #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

5:08:02 #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2143471 (476:19.46, 4186MB)

5:08:02 #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

5:08:02 #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

5:08:02 #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:08:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2143472 (2143472) = #2143472/476:19.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143472 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------

5:08:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389830656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2143472 | lead-out | 1 | 0x41 | 0x00

5:08:02 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

5:08:02 #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

5:08:02 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

5:08:02 #15 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 8x (11.080 KB/s)

5:08:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:08:02 #17 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

5:08:02 #18 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Super Link -> ON

5:08:02 #19 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

5:08:02 #20 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:08:11 #21 Text 0 File Cdrdrv.cpp, Line 1288
05:08:11.078 - TSSTcorp CD/DVDW TS-H552B\H1 T1 : Queue again later

5:15:22 #22 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2143472 (20B4F0h), lenght 0 blocks

5:15:22 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:15:22 #24 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2143471

5:15:36 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 8x (11.080 KB/s)

5:15:37 #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)

5:15:37 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:15:37 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1735
Invalid field in command

5:15:37 #29 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1735
Invalid track info

5:15:37 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 16/06/2004 0:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 4:27:50 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20/12/2003 20:03:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) "
:S

 

You're using Memorex huh?? That CMC MAG company makes Memorex and is complete crap. This is probably your problem now. I suggest Verbatum with Super AZO Dye (should say it right on the box) if you buy in stores or Taiyo Yuden if you buy online.

But it does look like you cleared everything else up pretty good!!

 

thks a lot m8 i'll follow your instructions