This is the latest file for the Kryptview 750 box fixes some minor bugs in software DOWNLOAD HERE Loader Here NOT MY WORK ALL CREDIT TO THE AUTHOR This is how you need to set the Box up with the cables below it gives with a null modem cable and a usb and null modem cable NOW IF YOU FOLLOW THE INFORMATION BELOW YOU WILL FIND YOU WILL GET YOUR BOX UPDATED IN NO TIME AT ALL. First of all you will need the KryptView Loader which can be downloaded from HERE Then you will also need to download the Bin file which you need to load on to the loader this can be downloaded from HERE Download both the loader and Bin file and make sure to save them to your Desktop. Open the Loader , once opened you will have a box just like below. Click on the green tab download button on the top right hand side, Once you have pressed on the download tab (button) you will see another box open just like below, Press open on the loader and select the Bin file that you saved to your desktop earlier highlighted in yellow, Press open on the top box and the file will now load just like below with the Bin file selected. Now POWER off your Kryptview AT THE BACK, press Start then POWER the Kryptview back on. You should now see the firmware starting to load, Once done you will see download successful just like below , Once it has finished Downloading the file to the box let the box reboot and then you can start your scanning. any further information you want go to their facebook page http://en-gb.facebook.com/people/Iconnect-Krypt/100001083720269
