Hi everyone I just got my M3ds simply I did all the steps to start according to Mr hanky guide but sadly my ds light couldn't recognized the m3 card it started as no ds card in slot 1 her what I did 1 I did format my transcend 2g micro sd with fat 2 I copied the ds -menu.dat file to the root of the sd card I did that with the _ds_mshl.nds and moonshell then all file in _system_ after I connected to my dsl nothing happen it started as nothing in slot no 1 please help to solve this issue
If the M3 is not being recognised by the DS then it's not a problem with the files or the MicroSD card. You would at least get a "Loading..." screen wether or not it is setup properly. Try removing the M3 and blowing in the DS slot and across the contacts of the M3 and reinserting the M3. Should that not work try opening the M3 and putting a small piece of paper between the circuit and the case (the side of the circuit without the contacts on it) and try again. This method pushes the contact pins forward very slightly for a better connection between the DS and M3.
