Ok dunno what the hell is going on ive never had problems burning in the past. But on two images ive unrard and tried to burn i get cyclical redundancy errors. Never happened before. Tried unraring them again and burning again just keep ending up with coasters. Even tried hooking up my external burner and same thing. Heres the log file for one of them. Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB03 - HA 1 TA 1 - 7.7.5.1 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <MATSHITA UJ-831D >Version: 1.00 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-831D atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === MATSHITA UJ-831D D: CDRom0 TSSTcorp CD/DVDW SH-S182M G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096432kB) Free physical memory: 1600MB (1638864kB) Memory in use : 21 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2007 Burn DVD Image 6:19:44 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:19:44 PM #2 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using DVD media 6:20:26 PM #3 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2281293 (506:57.18, 4455MB) 6:20:26 PM #4 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 6:20:26 PM #5 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 6:20:26 PM #6 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc not writeable. Insert writeable disc. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.) 6:20:26 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2281294 (2281294) = #2281294/506:57.19 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281144 blocks [G: TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 6:20:26 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [G: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4672090112, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2281294 | 2281144 | 0x00 0 | 1 | 1 | 0x41 | 2281294 | 2281144 | 0x00 2281294 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:20:26 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:20:26 PM #10 Phase 24 File dlgbrnst.cpp, Line 1760 Caching of files started 6:20:26 PM #11 Text 0 File Burncd.cpp, Line 4298 Cache writing successful. 6:20:26 PM #12 Phase 25 File dlgbrnst.cpp, Line 1760 Caching of files completed 6:20:26 PM #13 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 8x (11,080 KB/s) 6:20:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:20:27 PM #15 Text 0 File DVDR.cpp, Line 3070 Recording mode: Sequential Recording Mode 6:20:27 PM #16 Text 0 File DVDR.cpp, Line 3226 Start write address at LBA 0 DVD high compatibility mode: Yes 6:20:27 PM #17 Text 0 File Cdrdrv.cpp, Line 9288 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:20:44 PM #18 Text 0 File Cdrdrv.cpp, Line 1303 18:20:44.234 - G: TSSTcorp CD/DVDW SH-S182M : Queue again later 6:21:12 PM #19 WINPFILE 23 File CPortableWinPFile.cpp, Line 398 Data error (cyclic redundancy check). C:\dl-ku.img 6:21:12 PM #20 TRANSFER -25 File Reader.cpp, Line 308 Error reading data 6:21:12 PM #21 Text 0 File Reader.cpp, Line 311 Exception value: 23 6:21:12 PM #22 Text 0 File DVDR.cpp, Line 3446 EndDAO: Last written address was 70847 6:23:06 PM #23 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 8x (11,080 KB/s) 6:23:07 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:23:10 PM #25 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 6:23:10 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
AHHH frustrating as hell. I uninstalled nero and reinstalled a newer version. Starts going and im thinking great i fixed it makes it all the way to 50% this time instead of 6% and does the same freakin thing. Hers the log: Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB03 - HA 1 TA 2 - 7.10.1.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <MATSHITA UJ-831D >Version: 1.00 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-831D atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === MATSHITA UJ-831D D: CdRom0 TSSTcorp CD/DVDW SH-S182M G: CdRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096432kB) Free physical memory: 1519MB (1556300kB) Memory in use : 25 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2007 Burn DVD Image 7:13:30 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 7:13:30 PM #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 7:13:30 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2281143 (506:55.18, 4455MB) 7:13:30 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 7:13:30 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 7:13:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:13:30 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2281144 (2281144) = #2281144/506:55.19 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281144 blocks [G: TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 7:13:30 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [G: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4671782912, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2281144 | 2281144 | 0x00 2281144 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 7:13:30 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 7:13:30 PM #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 7:13:30 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 7:13:31 PM #12 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 7:13:31 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 7:13:31 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 7:13:31 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:13:31 PM #16 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 7:13:31 PM #17 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 7:13:31 PM #18 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:13:31 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 7:13:48 PM #20 Text 0 File Cdrdrv.cpp, Line 1352 19:13:48.265 - G: TSSTcorp CD/DVDW SH-S182M : Queue again later 7:17:55 PM #21 WINPFILE 23 File CPortableWinPFile.cpp, Line 398 Data error (cyclic redundancy check). C:\downloads\dl-ku.img 7:17:55 PM #22 TRANSFER -25 File Reader.cpp, Line 270 Error reading data 7:17:55 PM #23 Text 0 File Reader.cpp, Line 273 Exception value: 23 7:18:35 PM #24 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 1130367 (113F7Fh) 7:18:35 PM #25 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11,080 KB/s) 7:18:36 PM #26 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:18:39 PM #27 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 7:18:39 PM #28 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
If you can find a firmware update for you drive you will be lucky, but if you read between the lines of your manufacturer you will be clued into the problem. Is this in a laptop or is it external?
