missing channel/channels

Discussion in 'Digital TV - UK & Europe' started by badbm325i, Sep 3, 2009.

  1. badbm325i

    badbm325i Member

    Joined:
    Aug 5, 2009
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    hi i recently brought a eurovox ex1000sl all was fine when set up but over the last few days i noticed itv4 and a few other channels were breaking up ive checked and re'done all conections still the same ive now done a scan and itv4 is not being picked up at all even done deep scan, not sure if im missing any more as theres so many i seem to have movies,sport ect my modem is working fine thro same conection on a splitter ,,,any one got the frequency for itv4 or any other advice much welcome thanx peps,,,,ps my symbol rate is 6887
     
  2. malci

    malci Guest

    Do a Factory Default on your symbol rate and a fresh scan and they will all be back - for someone to give you a particular Frequency, you would have to supply your location, for more information on scanning visit the link below marked Eurovox courtesy of HiTeck.
     
  3. badbm325i

    badbm325i Member

    Joined:
    Aug 5, 2009
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    hi thanx for reply just done factory reset/scan but sadly no itv4 still,,,not to bothered about itv4 its just what ever else i might be missing and the reason why
     
  4. malci

    malci Guest

    Well in the N/West TW - ITV4 is on the same frequency as More 4 - Film 4 and 4+1 etc. so if you have those then check the Frequency on them and then just try a manual scan on the particular Frequency.
     
  5. badbm325i

    badbm325i Member

    Joined:
    Aug 5, 2009
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    ive just managed to pick up itv 4 but its freezing up and saying no/or bad signal but yet signal and qality both on constant 80% its doing my head in/ive just moved the cable around and it seems to alter the picture if i get it in the right place its not to bad but surely if it cable/plug related it will be the same on all channels?????
     

Share This Page