Muutama aloittelijan kysymys

Discussion in 'Linux -keskustelu' started by JussiKp, Aug 2, 2006.

  1. JussiKp

    JussiKp Member

    Joined:
    Jul 24, 2006
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Ajattelin, ettei ehkä kannata perustaa näille omia ketjujaan (?)

    Kysymys 1. Kuinka saada DOMi-laajennus Firefoxiin? Addons.mozilla.orgista sitä ei löydy. Windowsilla DOMi oli asennuspaketin mukana ja sen sai rastin ruutuun laittamalla asennettua selaimen mukana.

    Kysymys 2. Voikohan tässä jotenkin säätää näytön kirkkautta ja kontrastia? Tuolla K Menusta löytyvässä ATI Centerissä pystyi säätämään ainoastaan gammaa. Myöskään System Settings - Displaystä en löytänyt kuin gamma-asetuksia.

    Kysymys 3. Musiikki (mp3) kuuluu koneessa sillä tavalla oudosti. Esim. bassoa ei ole ollenkaan ja ääni ei tule sillein kunnolla ulos. Harmi kun en mitään termistöä tiedä enkä osaa paremmin kuvailla, ehkä jotain mono/stereo-juttuja? alsamixer sanoo vieläpä "alsamixer: relocation error: alsamixer: symbol snd_mixer_selem_get_playback_dB, version ALSA_0.9 not defined in file libasound.so.2 with link time reference". Äänikortti on Realtek ALC880. Tarvinko jotain ajuria kun ääni kuitenkin tulee ulos ilmankin?

    Kysymys 4. Graafisia ohjelmia käynnitäessä tulee aina

    X Error: BadDevice, invalid or uninitialized input device 168
    Major opcode: 148
    Minor opcode: 3
    Resource id: 0x0
    Failed to open device
    X Error: BadDevice, invalid or uninitialized input device 168
    Major opcode: 148
    Minor opcode: 3
    Resource id: 0x0
    Failed to open device

    Tyyppistä tekstiä. Jostain luin, että kommentoimalla wacom-devicet pois xorg.confista ongelma katoaisi. Kun kommentoin ne ulos, jämähtää kone käynnistyvaiheessa, eli jotain muuta olisi ilmeisesti keksittävä. Display driver on fglrx.

    Kysymys 5. Mistähän voisi johtua, että jotkin videot (avi) toistuvat kuin diashow, mutta jotkin taas eivät. Olen asentanut libxine-extracodecs. Windowsilla mikään näistä ei pätkinyt, joten vika ei liene itse videoissa.
    EDIT: Esiintyy vain MPlayerillä ilmeisesti.


    Koitin Googlailla näitä juttuja eilen ja kysellä myös muilla keskustelupalstoilla, mutta apua ei ainakaan vielä ole oikein löytynyt. Mulla on Kubuntu Dapper jos sitä tietoa tarvitaan.
     
    Last edited: Aug 2, 2006
  2. JwN

    JwN Guest

    Käytössä Suse 10.1 mut...

    1.Siellä se DOM on valmiina työkalu valikossa (1.5.0.5)

    2.ATI:sta en muista, mutta Nvidia:lla on asetuksissa.

    3.mites Kmix, itse en käytä alsamixeriä.

    4.Paste xorg.conf tänne, vois tutkia.

    5.Ikinä kuullutkaan noista codeceista, väärä distro mut vois auttaa.
    http://kotoistaminen.novell.fi/?sivu=mp3

     
  3. JussiKp

    JussiKp Member

    Joined:
    Jul 24, 2006
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    1. Itse en valikoista löytänyt domia, mutta ei se mitn.
    -----
    2. Tältä näyttää ATI Control Panelini: http://img120.imageshack.us/img120/8755/snapshot1jo5.png


    xorg.conf:


    # /etc/X11/xorg.conf (xorg X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
    # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    # sudo dpkg-reconfigure -phigh xserver-xorg

    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "aticonfig-Screen[0]" 0 0
    InputDevice "Generic Keyboard"
    InputDevice "Configured Mouse"
    InputDevice "stylus" "SendCoreEvents"
    InputDevice "cursor" "SendCoreEvents"
    InputDevice "eraser" "SendCoreEvents"
    EndSection

    Section "Files"

    # path to defoma fonts
    FontPath "/usr/share/X11/fonts/misc"
    FontPath "/usr/share/X11/fonts/cyrillic"
    FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/share/X11/fonts/Type1"
    FontPath "/usr/share/X11/fonts/100dpi"
    FontPath "/usr/share/X11/fonts/75dpi"
    FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    EndSection

    Section "Module"
    Load "i2c"
    Load "bitmap"
    Load "ddc"
    Load "dri"
    Load "extmod"
    Load "freetype"
    Load "glx"
    Load "int10"
    Load "type1"
    Load "vbe"
    EndSection

    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "us"
    Option "XkbVariant" "dvorak"
    EndSection

    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "CorePointer"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ExplorerPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "true"
    EndSection

    Section "InputDevice"

    # /dev/input/event
    # for USB
    Identifier "stylus"
    Driver "wacom"
    Option "Device" "/dev/wacom" # Change to
    Option "Type" "stylus"
    Option "ForceDevice" "ISDV4" # Tablet PC ONLY
    EndSection

    Section "InputDevice"
    # /dev/input/event
    # for USB
    Identifier "eraser"
    Driver "wacom"
    Option "Device" "/dev/wacom" # Change to
    Option "Type" "eraser"
    Option "ForceDevice" "ISDV4" # Tablet PC ONLY
    EndSection

    Section "InputDevice"

    # /dev/input/event
    # for USB
    Identifier "cursor"
    Driver "wacom"
    Option "Device" "/dev/wacom" # Change to
    Option "Type" "cursor"
    Option "ForceDevice" "ISDV4" # Tablet PC ONLY
    EndSection

    Section "Monitor"
    Identifier "Generic Monitor"
    HorizSync 28.0 - 84.0
    VertRefresh 43.0 - 60.0
    Option "DPMS"
    Gamma 0.5 0.5 0.66
    EndSection

    Section "Monitor"
    Identifier "aticonfig-Monitor[0]"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection

    Section "Device"
    Identifier "ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
    Driver "ati"
    BusID "PCI:1:0:0"
    EndSection

    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
    Option "VideoOverlay" "on"
    Option "OpenGLOverlay" "off"
    EndSection

    Section "Screen"
    Identifier "Default Screen"
    Device "ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
    Monitor "Generic Monitor"
    DefaultDepth 24
    SubSection "Display"
    Depth 1
    Modes "1680x1050"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1680x1050"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1680x1050"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1680x1050"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1680x1050"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1680x1050"
    EndSubSection
    EndSection

    Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    Section "DRI"
    Mode 0666
    EndSection

     
  4. JwN

    JwN Guest

    Tuli tohon video juttuun väärä linkki, tässä uusi.

    http://kotoistaminen.novell.fi/?sivu=suse_multimedia

    Ilmeisesti sulla on wacom:n piirto alusta käytössä, jos ei niin sitten nuo rivit tuottaa ongelmia.

    Muistaakseni ATI:n control panel on vähän ankea.
     
  5. JussiKp

    JussiKp Member

    Joined:
    Jul 24, 2006
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Eipä mulla mitään piirtoalustaa sinänsä ole, tasohiiri kylläkin kun tämä on läppäri.
     

Share This Page