Reinstalled Nero 7 -trying to do data burns of AVI for my Divx player. Using Taiyo discs, have HP Pavilion, 1G memory, no multi-tasking. Burn process 'appears' to go well - DVD burner lite comes on, Nero says it burned successfully. BUT. Putting disk into PC - lite comes on constant and hangs....in Divx player it says unknown disk. Tried a Ritek (yuk) disk with the following log from Nero. Any of you guru's got any suggestions? Bruce 1C82-**serial number removed** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 (Nero Express) Recorder: <TOSHIBA CD/DVDW SDR6572M>Version: XU07 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <RZ7532F VBS170R >Version: 1.0 - HA 1 TA 1 - 7.10.1.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST9100823A atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA CD/DVDW SDR6572M atapi Port 0 ID 1 DMA: On CdRomPeripheral : RZ7532F VBS170R 1.0 air3fq7u Port 1 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA CD/DVDW SDR6572M D: CdRom0 RZ7532F VBS170R E: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1047020kB) Free physical memory: 407MB (417196kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.3.2008 ISO compilation 5:36:20 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:36:20 PM #2 Text 0 File Isodoc.cpp, Line 6666 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:36:21 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 5:36:21 PM #4 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 5:36:21 PM #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 358575 ( 79:41.00, 700MB) 5:36:21 PM #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:36:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: TOSHIBA CD/DVDW SDR6572M, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 5:36:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:36:21 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358576 (358576) = #358576/79:41.1 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358576 blocks [D: TOSHIBA CD/DVDW SDR6572M] -------------------------------------------------------------- 5:36:21 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: TOSHIBA CD/DVDW SDR6572M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 734363648, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 358576 | 0 | 0x00 358576 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:36:21 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 5:36:21 PM #12 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 5:36:21 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 5:36:21 PM #14 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 5:36:21 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 5:36:21 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 5:36:21 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:36:21 PM #18 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 5:36:21 PM #19 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 5:36:22 PM #20 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:36:22 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 5:41:04 PM #22 Text 0 File WriterStatus.cpp, Line 113 <D: TOSHIBA CD/DVDW SDR6572M> start writing Lead-Out at LBA 358576 (578B0h), length 0 blocks 5:43:32 PM #23 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 358575 (578AFh) 5:43:32 PM #24 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 4x (5,540 KB/s) 5:43:33 PM #25 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:43:37 PM #26 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 5:43:37 PM #27 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
all I saw was that you have a virtual drive on...... sometimes Nero is buggy with a virtual drive also on! Your burner..... is this on a laptop? I tried looking up your burner: http://forum.rpc1.org/dl_firmware.php?download_id=2153 you're showing a firmware for it as XU07 but I can't find that firmware anywhere for your drive! and further analysis on your drive: http://www.videohelp.com/dvdwriters...&hddvdrom=&orderby=Name&hits=50&Search=Search shows that it's only an 8x burner. Which means that if you are using 16x media you might have a problem there!
IHoe ~ The XU07 firmware is the latest - it's for a slave drive, CSEL, RPC1...I updated it about a year ago and it's worked fine up to now. Yes, the toshiba 6572M is in a laptop. I went ahead and got rid of the virtual drive, and switched back to my pile of 8X Taiyo's. Tried to burn again at 4X - same problem - it looks like it burns well, then won't play in PC or divx player. Also tried doing an AVI to DVD burn with same results. Here's the latest log to see if it might show something I'm missing. Bruce 1C82-0000-19E5-MAAX-4000-2404-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 (Nero Express) Recorder: <TOSHIBA CD/DVDW SDR6572M>Version: XU07 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA CD/DVDW SDR6572M>Version: XU07 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST9100823A atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA CD/DVDW SDR6572M atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === TOSHIBA CD/DVDW SDR6572M D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1047020kB) Free physical memory: 401MB (410992kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.3.2008 ISO compilation 10:18:59 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:18:59 PM #2 Text 0 File Isodoc.cpp, Line 6666 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:18:59 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 10:18:59 PM #4 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 10:19:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 358863 ( 79:44.63, 700MB) 10:19:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:19:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: TOSHIBA CD/DVDW SDR6572M, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 10:19:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:19:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358864 (358864) = #358864/79:44.64 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358864 blocks [D: TOSHIBA CD/DVDW SDR6572M] -------------------------------------------------------------- 10:19:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: TOSHIBA CD/DVDW SDR6572M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 734953472, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 358864 | 0 | 0x00 358864 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:19:00 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:19:00 PM #12 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 10:19:00 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 10:19:00 PM #14 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 10:19:00 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 10:19:00 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 10:19:00 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:19:00 PM #18 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 10:19:00 PM #19 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 10:19:00 PM #20 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:19:00 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 10:23:42 PM #22 Text 0 File WriterStatus.cpp, Line 113 <D: TOSHIBA CD/DVDW SDR6572M> start writing Lead-Out at LBA 358864 (579D0h), length 0 blocks 10:26:10 PM #23 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 358863 (579CFh) 10:26:10 PM #24 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 4x (5,540 KB/s) 10:26:11 PM #25 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:26:15 PM #26 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 10:26:15 PM #27 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
the nero log doesn't show much going on at all! The reason why I asked if your computer was a laptop is that I know that laptops seems to have more trouble with DVD burning than non laptop computers. does the avi work? can you play the avi on the computer? also: what program did you use to convert the avi to dvd? Nero vision? do you have that log?
..Ah - a late-niter. Here's what's going on still. I do a Nero Vision avi data burn to a blank Taiyo disc. DVD player lite comes on, and about 4 minutes later it pops out - Nero says burned successfully. But. I put the burned avi back into the PC drive - lite comes on and just hangs (stays on). Put the avi into my Divx player - says unrecognized disk. Then. Used Nero avi to DVD - 2 hours burning it. Same problem as above and can't play. Frustrating - looks like maybe I might have to get a new DVD-drive for my PC.....thx for your help
does it play original dvds AND cds? not playing after burn is known but never seen it on TY / Ritek i use both but Ritek is ---> GO5 dye
I put in both commercial and previously burned dvd's and cd's - all read fine. Also tried to burn using another program (winAvi) - it took the normal 2 hrs to transcode, drive lite came on while burning took place, then ejected it. Same problem with Nero - in my pc drive, lite comes on and stays on (drive unaccessible), and divx player says unknown disc. too weird.
