need help liteon 5007

Discussion in 'DVD recorders' started by joann54, Dec 30, 2005.

  1. joann54

    joann54 Member

    Joined:
    Dec 30, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    tried the hack on the 5007 liteon and it won't do anything now. did i destroy it?Can it be changed back to the way it was before?
    thanks
     
    joann54, Dec 30, 2005
    #1
  2. DVD4x4

    DVD4x4 Member

    Joined:
    Feb 17, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    What happens when you power the 5007 up?
     
    DVD4x4, Feb 18, 2006
    #2
  3. joann54

    joann54 Member

    Joined:
    Dec 30, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    just says error
     
    joann54, Feb 18, 2006
    #3
  4. DVD4x4

    DVD4x4 Member

    Joined:
    Feb 17, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Does it still say ERROR even after it is unplug from power and plug back in?
    It never says HELLO?
    Is there still a firmware CD inside the drive?
     
    Last edited: Feb 19, 2006
    DVD4x4, Feb 19, 2006
    #4
  5. joann54

    joann54 Member

    Joined:
    Dec 30, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    just says insert cd then error never hello. and says error even after unplug,
     
    joann54, Feb 19, 2006
    #5
  6. DVD4x4

    DVD4x4 Member

    Joined:
    Feb 17, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    If the disk tray opens when PUT IN CD displays, the drive is talking to the system board. If you have a good copy of the firmware on CD and the CD is closed (write protected) put in CD and press tray close button. The drive should spin up and read the firmware file on CD, the display will show F UP 00XX (XX is the version number as in 0040), let it update untill the disk tray opens and the display shows DONE, remove CD, leave disk tray open, unplug power for 20-30 seconds and replug in. If the drive is defective or the CD file is bad the display will show ERROR. If the drive tray never opens, check for a mechanical bind of the disk tray door and the 5007 front panel.
     
    DVD4x4, Feb 21, 2006
    #6

Share This Page