Hi all, New to this lark and not really a computer techie but will try my best...when trying to burn MP3 files to an LG GWA 4040N +- dvd and TDK +W & +RW I always get a burn failure and mostly for different reasons (I have 5 logs so far)I have tried all sorts but always seem to get the failure roughly at the same point in the process and the disc is unreadable and sometimes my laptop has been re-booted..latest log attached Any Ideas please (in fairly easy terms) steve home Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.25 Recorder: <HL-DT-ST DVD-RW GWA-4040N>Version: 1.01 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <VOBID InstantDrive CD >Version: 14 - HA 2 TA 0 - 6.3.1.25 Adapter driver: <VOBID> HA 2 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040N atapi Port 1 ID 0 DMA: Off CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-RW GWA-4040 D: CDRom0 VOBID InstantDrive CD E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523628kB) Free physical memory: 102MB (104548kB) Memory in use : 80 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.10.2004 ISO compilation 8:08:40 PM #1 Text 0 File Isodoc.cpp, Line 6083 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:08:40 PM #2 Text 0 File Reader.cpp, Line 126 Reader running 8:08:40 PM #3 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVD-RW GWA-4040N running 8:08:40 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 8:08:40 PM #5 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 8:08:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1969103 (437:34.53, 3845MB) 8:08:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 8:08:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: HL-DT-ST DVD-RW GWA-4040N, Media type: DVD+R Disc Manufacturer ID: TDK, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 8:08:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:08:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1969104 (1969104) = #1969104/437:34.54 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969104 blocks [HL-DT-ST DVD-RW GWA-4040N] -------------------------------------------------------------- 8:08:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVD-RW GWA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4032724992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1969104 | lead-out | 1 | 0x00 | 0x41 8:08:41 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 8:08:42 PM #13 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 8:08:42 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 8:08:42 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 4x (5,540 KB/s) 8:08:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:08:42 PM #17 Text 0 File Cdrdrv.cpp, Line 8230 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: TDK..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 54 44 4B 00 00 - 00 00 00 30 30 31 00 38 ...TDK.....001.8 23 54 37 12 02 4E 72 02 - A0 69 15 15 0B 0B 08 08 #T7..Nr..i...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 8:08:42 PM #18 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 12:23,223 (743223ms) -> OK 8:08:42 PM #19 Text 0 File DVDPlusRW.cpp, Line 628 Start write address at LBA 0 DVD high compatibility mode: No 8:13:41 PM #20 SCSI -400 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D20000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x80 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x02 0x46 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x80 0x03 8:13:41 PM #21 CDR -400 File Writer.cpp, Line 304 Unspecified target error 8:13:42 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:13:42 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:16:22 PM #24 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 8:16:22 PM #25 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 8:16:22 PM #26 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 11:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) File 'Drivers\vobid.sys': Ver=1, 1, 0, 20, size=29239 bytes, created 8/1/2003 2:47:24 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i get the same errors but mine is the same disc at once error if u find out whats wrong please tell me thank u
Hi Sabre190, I would first recommend that you enable DMA for your recorder, as I have seen this error caused by a disabled DMA. Also, you should check to see if you have the latest firmware for your model recorder. Your recorder currently shows as version 1.01, and this could have a large affect on writes. And last, does this occur only when you try and create an MP3 DVD? Do you have problems when creating a Data CD without any MP3 files? MP3 files are just data files as far as Nero is concerned for the operation you are doing, but my concern would be if one of those files may be corrupted in some form. Regards, Craig Ahead Software USA
Thanks, It only happens when burning mp3 onto dvd, they burn fine onto cd, got some dvd- to try see if it was just the dvd+ that was the problem.
You enable DMA from your Control Panel->System->HardWare->Device Manager and then enable 'DMA if Availabe' for all your Primary and Secondary IDE bus. Regards Craig
Thanks again, DMA if available was already selected but that firmware patch seems to have sorted the problem out somewhat. I burned a full disc of mp3 on the old media and all went well, however, I can only play the first folder on my dvd's (this problem has always been there)and I think this may be a common problem with my DVD players and not the disc. Cheap DVD (LG and Brigmton) Steve
I also have a Ferrari 3000 with the GWA-4040N DVD+/-RW drive and I have been having problems with it since sometime after installing Service Pack 2. The drive can READ any written disc, but refuses to recognize a blank disc (it claims there is no disc loaded and endlessly searches for it) or erase an RW disc, and this occurs for both CDs and DVDs. Is it safe to try a Dell or HP firmware on this Acer version drive because there is nothing on the Acer page at all?
