I had a movie on .avi format. I used cucusoft video converter and Ifo edit to convert the movie to dvd pal format...this seemed to go ok no error messages. BUT when i tried to burn the converted files (following the instructions given in the cutusoft help guide) I got a error message 6 minutes or so into the burn process. Im a novice to this whole conceptg of converting and burning files, this is my first attempt I hope someone can point out what i have done wrong from the log below. Any help greatly appreciated. torrok
Sorry....im an idiot. lol Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 Nero version: 6.3.1.17 Recorder: <MATSHITA UJ-820D> Version: 1.00 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA UJ-820D >Version: 1.00 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA UJ-820D F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523248kB) Free physical memory: 170MB (174224kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.7.2004 UDF/ISO compilation 00:17:59 #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 00:18:00 #2 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.IFO has been modified 00:18:00 #3 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.BUP has been modified 00:18:00 #4 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.IFO has been modified 00:18:00 #5 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.BUP has been modified 00:18:00 #6 Phase 113 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed 00:18:00 #7 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 00:18:00 #8 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 00:18:00 #9 Text 0 File Reader.cpp, Line 118 Reader running 00:18:00 #10 Text 0 File Writer.cpp, Line 124 Writer MATSHITA UJ-820D running 00:18:00 #11 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 00:18:00 #12 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 00:18:00 #13 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 00:18:07 #14 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1413200 (314:02.50, 2760MB) 00:18:07 #15 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 00:18:07 #16 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: MATSHITA UJ-820D, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 00:18:07 #17 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 00:18:07 #18 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1413200 (1413200) = #1413200/314:2.50 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1413200 blocks [MATSHITA UJ-820D ] 1: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (0) not provided original disc pos #0 + 1 (1) = #1/0:0.1 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [MATSHITA UJ-820D ] -------------------------------------------------------------- 00:18:07 #19 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [MATSHITA UJ-820D ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2894233600, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 2894233600 2894233600 2894235648, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1413200 | 2 | 0 | 0x00 | 0x41 1413200 | 2 | 1 | 0x00 | 0x41 1413201 | lead-out | 1 | 0x00 | 0x41 00:18:07 #20 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 00:18:07 #21 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 00:18:07 #22 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 00:18:07 #23 Phase 28 File dlgbrnst.cpp, Line 1845 Speed measurement started 00:18:07 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 00:18:07 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 00:20:32 #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 00:20:38 #27 Text 0 File WriterStatus.cpp, Line 115 <MATSHITA UJ-820D > start writing Lead-Out at LBA 1 (1h), lenght 0 blocks 00:20:38 #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 00:20:38 #29 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 00:20:38 #30 Phase 29 File dlgbrnst.cpp, Line 1796 Speed measurement completed: 14.4x (19,964 KB/s) 00:20:38 #31 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 2.4x (3,324 KB/s) 00:20:38 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 00:20:38 #33 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 00:20:38 #34 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: W11 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 00:20:38 #35 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 15:03,394 (903394ms) -> OK 00:20:38 #36 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 00:20:40 #37 Text 0 File Cdrdrv.cpp, Line 1294 00:20:40.769 - MATSHITA UJ-820D\H1 T0 : Queue again later 00:20:51 #38 Text 0 File Cdrdrv.cpp, Line 1294 00:20:51.194 - MATSHITA UJ-820D\H1 T0 : Queue again later 00:26:34 #39 SCSI -400 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03C50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x03 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x08 0x88 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x08 0x85 0x80 0x0A 0x00 0x2A 0x00 0x00 0x03 0x00 00:26:34 #40 CDR -400 File Writer.cpp, Line 304 Unspecified target error 00:26:34 #41 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 00:26:34 #42 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 00:26:35 #43 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 00:26:35 #44 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 00:26:35 #45 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20 File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 24/06/2004 23:41:17 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 31/03/2003 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The next thing u need to do is edit out your Nero registration code. The edit button is the pencil and paper icon on the orange bar, just above your post...
I refreshed and it vanished like magic, LOL. Its going to take a few mintes for me to go over the post but the first thing I noticed was this: Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE I always uncheck those. Try unchecking those and then do a simulated burn and post the log from that. Right now it looks like your burner is not seeing the media when the write portion is beginning: Unspecified target error I'll look this log over some more and see if I can find anything else. Edit: This looks odd too: Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ Those numbers are usually all zeros. This is data in the burst cutting area of the blank disc. Have you burned something on to this disc? All the blank media I use usually says "Data in Burst Cutting Area does not exsist". _X_X_X_X_X_[small]motorcycle racer computer newbie Sony VAIO Suzuki GSXR1000 [/small]
Its a dvd+rw disc (philips) there had been a movie on it at one time i think, but i ran erased everything on it before i used it, using the erase feature on roxio drag and drop whxich came with this laptop. Im doing the simulation now and will post the log asp. Thanks thus far. torrok
It's a re-writable and has been used before. Did you do a full erase? Drag to Disc, InCD and other packet writing software often causes mysterious burning problems. Disable or uninstall. Nero and Roxio don't get along together for many people. Most choose Nero and get rid of Roxio. Looking around the internet I see that unspecified target errors seem to be more often in laptop computer's so it may be heat related. I saw some claims that either letting the computer cool off or getting a laptop cooler solved this problem.
Dont know what im doing wrong here now, I went into Nero and unchecked both boxes like you adviced c tried to click on simulate but it was greyed out. it would only let me click on simulate when i ticked the use multiple recorders box.....which i did and then got an error message....the log is below. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 Nero version: 6.3.1.17 Recorder: <MATSHITA UJ-820D> Version: 1.00 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA UJ-820D >Version: 1.00 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA UJ-820D F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523248kB) Free physical memory: 190MB (194952kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.7.2004 UDF/ISO compilation 21:57:26 #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 21:57:26 #2 DVDREALLOC -124 File DVDVideoCompilation.cpp, Line 1177 21:57:26 #3 Phase 115 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation failed Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20 File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 24/06/2004 23:41:17 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 31/03/2003 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Yes i did a full erase. I have now uninstalled roxio from my pc. If i find out why im getting this message about the files not being `reallocated` (whatever that means??) i`ll leave the laptop to cool then try burning again.
Well some burners aren't supported by Nero for doing simulations so that may be the problem as far as the greyed out sim box goes. I don't think you can erase stuff from the burst cutting area but give it a try... You may want to try a different disc. I sure don't want you to compound problems by trying to many things at once. That failiure to reallocate files may have been caused by selecting multiple recorders for the simulation, just guessing though. Nero could get confused when trying to send the files to non-exsistant recorders... possibly. Veblin was right on about the Roxio, this may have been the cause of the original problem.
roxizap.exe This program will remove Roxio`s software completely. WARNING: THIS PROCEDURE MIGHT CAUSE ANY OTHER ROXIO OR ADAPTEC SOFTWARE INSTALLED ON THE PC TO BECOME INOPERABLE. PLEASE UNINSTALL ANY OTHER ROXIO OR ADAPTEC SOFTWARE FIRST BEFORE ATTEMPTING. http://softwareupdates.roxio.com/gm/support/tools/roxizap.exe
Nero has a disc info button avalible after you select the burn icon. You may want to take a look at that before proceeding with the burn. It will tell you if the disc is empty. I tried a couple of simulated burns and was not able to make anything fail by checking the pathdepth and allow characters boxes. It did give me a warning that the disc may be unreadable under DOS/Windows 3.1X and then suggested that I uncheck the boxes.
fasfrank and verblin just wanted to update you both and thank you for the advise. I succefully burned my converted avi files onto the dvd-rw disc on a pal format. Dont know what i did differently whether it was allowing the laptop to cool down before burning or whether removing Roxio drag to disc did the trick bottom line is today i had a succesful burn....Thanks guys. I included the succesful log details below, maybe you guys can see from it what contibuted to the success this time around. Bear in mind this is the first time ever i have burned anything....also first time ever i have converted files of any sort. Hopefully it wont be the last! Thanks again for your help. Log. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 Nero version: 6.3.1.17 Recorder: <MATSHITA UJ-820D> Version: 1.00 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA UJ-820D >Version: 1.00 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA UJ-820D atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA UJ-820D F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523248kB) Free physical memory: 135MB (138880kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.7.2004 UDF/ISO compilation 15:09:57 #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 15:09:57 #2 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.IFO has been modified 15:09:57 #3 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.BUP has been modified 15:09:57 #4 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.IFO has been modified 15:09:57 #5 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.BUP has been modified 15:09:57 #6 Phase 113 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed 15:09:57 #7 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 15:09:57 #8 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 15:09:57 #9 Text 0 File Reader.cpp, Line 118 Reader running 15:09:57 #10 Text 0 File Writer.cpp, Line 124 Writer MATSHITA UJ-820D running 15:09:57 #11 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 15:09:57 #12 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 15:09:57 #13 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 15:09:58 #14 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1413200 (314:02.50, 2760MB) 15:09:58 #15 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 15:09:58 #16 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: MATSHITA UJ-820D, Media type: DVD+RW Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 1 15:09:58 #17 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:09:58 #18 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1413200 (1413200) = #1413200/314:2.50 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1413200 blocks [MATSHITA UJ-820D ] 1: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (0) not provided original disc pos #0 + 1 (1) = #1/0:0.1 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [MATSHITA UJ-820D ] -------------------------------------------------------------- 15:09:58 #19 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [MATSHITA UJ-820D ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2894233600, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 2894233600 2894233600 2894235648, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1413200 | 2 | 0 | 0x00 | 0x41 1413200 | 2 | 1 | 0x00 | 0x41 1413201 | lead-out | 1 | 0x00 | 0x41 15:09:58 #20 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 15:09:59 #21 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 15:09:59 #22 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 15:09:59 #23 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 2.4x (3,324 KB/s) 15:09:59 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:09:59 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 15:09:59 #26 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RICOHJPN Media type ID: W11 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9 23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(... 6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............ 15:09:59 #27 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 15:03,394 (903394ms) -> OK 15:09:59 #28 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 15:10:03 #29 Text 0 File Cdrdrv.cpp, Line 1294 15:10:03.175 - MATSHITA UJ-820D\H1 T0 : Queue again later 15:24:43 #30 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 15:24:57 #31 Text 0 File WriterStatus.cpp, Line 115 <MATSHITA UJ-820D > start writing Lead-Out at LBA 1 (1h), lenght 0 blocks 15:24:57 #32 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 15:25:00 #33 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 15:25:00 #34 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 15:25:00 #35 Phase 37 File dlgbrnst.cpp, Line 1845 Burn process completed successfully at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.0.1.39 , size=24576 bytes, created 02/04/2004 22:32:20 File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 24/06/2004 23:41:17 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 31/03/2003 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Good for you torrok, It is nice to see a successful bun log posted! I sure hope you can come back and help someone else or if you have questions we will be more than happy to answer them. I think it was the Roxio causing the problems, Hopwever I have never seen this before: 15:09:57 #2 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.IFO has been modified 15:09:57 #3 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VIDEO_TS.BUP has been modified 15:09:57 #4 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.IFO has been modified 15:09:57 #5 Text 0 File DVDVideoCompilation.cpp, Line 543 Content of VTS_01_0.BUP has been modified That's about the only thing I see different from one of my burn logs. Cheers, Frank
I have no clue as to what the `modification` message is in the log either Frank. I converted and burned the files based soley on the Help facility that came with Cutusoft Video Converter. I just followed the instructions, the technical details on how i actually achieved the desired result are way beyond this guy lol. Tell you what though, i have been reading through the forums here since i registered and the information that can be found just from reading the questions and answers is first class. I`ll be stopping by every day to read and you can bet money i`ll be posting again with some quiery or other, and maybe chipping in if i read where someone has encountered a similar problem to myself. Thanks again for your help. PS. I just had a thought, dont know if this could result in the `modification` message. When i tried the simulated burn and got the message about `re allocation` I decided to delete the the contents of my VIDEO_TS file (incase i had screwed up that part of the process in some way) and go back a stage to where it says in the Cutusoft help section to use Ifo Edit " to generate the DVD structure(vob and ifo files) " I generated the files again and went from there. Thats when i got the successful burn. Maybe thats why the `modification` message? Just thought id add this info incase it helps anyone in future. torrok
I'm having something of a similar problem. Nero Ultra was burning absolutely fine. Last night, however, it stopped. I've got two error logs to show, and no idea what's wrong. I had roxio on here, but that wasn't causing any problems. I removed it (or so I thought) before installing the updated InCD. Nero still burnt after doing that, though, so I don't know what the problem is now. First: [21:35:57] NeroVision Properties of your project: [21:35:57] NeroVision Aspect ratio: Automatic [21:35:57] NeroVision Video mode: PAL [21:35:57] NeroVision Quality: Automatic [21:35:57] NeroVision Used disc space: 2.16 GB [21:35:57] NeroVision Your project contains the following: [21:35:57] NeroVision Number of titles: 1 [21:35:57] NeroVision 1. Title 1 (Video Title, 2h 32m 16s, 13 chapters) [21:35:57] NeroVision Video mode: PAL [21:35:57] NeroVision Aspect ratio: 4:3 [21:35:57] NeroVision Quality: Super long play (1691 kbps) [21:35:57] NeroVision Resolution: 352 x 576 (Half D1) [21:35:57] NeroVision Number of menus: 1 [21:35:57] NeroVision - Menu for Title 1 (4 pages)[21:35:57] NeroVision [21:35:57] NeroVision Windows XP 5.1 [21:35:57] NeroVision IA32 [21:35:57] NeroVision WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02 [21:35:57] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 [21:35:57] NeroVision Nero API version: 6.3.1.17 [21:35:57] NeroVision Using interface version: 6.3.1.11 [21:35:57] NeroVision Installed in: C:\Program Files\Ahead\Nero\ [21:35:57] NeroVision Application: ahead\NeroVision [21:35:57] NeroVision === Scsi-Device-Map === [21:35:57] NeroVision DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On [21:35:57] NeroVision DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: Off [21:35:57] NeroVision CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 1 ID 0 DMA: On [21:35:57] NeroVision CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On [21:35:57] NeroVision === CDRom-Device-Map === [21:35:57] NeroVision TOSHIBA DVD-ROM SD-R5112 F: CDRom0 [21:35:57] NeroVision HL-DT-ST RW/DVD GCC-4480 E: CDRom1 [21:35:57] NeroVision ======================= [21:35:57] NeroVision AutoRun : 1 [21:35:57] NeroVision Excluded drive IDs: [21:35:57] NeroVision WriteBufferSize: 74448896 (0) Byte [21:35:57] NeroVision ShowDrvBufStat : 0 [21:35:57] NeroVision BUFE : 0 [21:35:57] NeroVision Physical memory : 510MB (523248kB) [21:35:57] NeroVision Free physical memory: 181MB (185744kB) [21:35:57] NeroVision Memory in use : 64 % [21:35:57] NeroVision Uncached PFiles: 0x0 [21:35:57] NeroVision Use Static Write Speed Table: 0 [21:35:57] NeroVision Use Inquiry : 1 [21:35:57] NeroVision Global Bus Type: default (0) [21:35:57] NeroVision Check supported media : Disabled (0) [21:35:57] NeroVision 12.7.2004 [21:35:57] NeroVision NeroAPI [21:35:57] NeroVision Existing drivers: [21:35:57] NeroVision File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 [21:35:57] NeroVision File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04 [21:35:57] NeroVision File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 30/07/2003 03:02:00 (Prassi/Veritas driver for win 2K) [21:35:57] NeroVision File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 13:57:34 (InCD4 driver for win NT/2K/XP) [21:35:57] NeroVision File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 13:57:52 (InCD4 driver for win NT/2K/XP) [21:35:57] NeroVision File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 13:59:24 (InCD4 driver for win NT/2K/XP) [21:35:57] NeroVision Registry Keys: [21:35:57] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Second: [13:14:42] NeroVision Properties of your project: [13:14:42] NeroVision Aspect ratio: Automatic [13:14:42] NeroVision Video mode: PAL [13:14:42] NeroVision Quality: Automatic [13:14:42] NeroVision Used disc space: 1.54 GB [13:14:42] NeroVision Your project contains the following: [13:14:42] NeroVision Number of titles: 1 [13:14:42] NeroVision 1. Title 1 (Video Title, 1h 48m 01s, 10 chapters) [13:14:42] NeroVision Video mode: PAL [13:14:42] NeroVision Aspect ratio: 4:3 [13:14:42] NeroVision Quality: Super long play (1691 kbps) [13:14:42] NeroVision Resolution: 352 x 576 (Half D1) [13:14:42] NeroVision Number of menus: 1 [13:14:42] NeroVision - Menu for Title 1 (5 pages)[13:14:42] NeroVision [13:14:42] NeroVision Windows XP 5.1 [13:14:42] NeroVision IA32 [13:14:42] NeroVision WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 11/06/1997 20:01:02 [13:14:42] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06 [13:14:42] NeroVision Nero API version: 6.3.1.17 [13:14:42] NeroVision Using interface version: 6.3.1.11 [13:14:42] NeroVision Installed in: C:\Program Files\Ahead\Nero\ [13:14:42] NeroVision Application: ahead\NeroVision [13:14:42] NeroVision === Scsi-Device-Map === [13:14:42] NeroVision DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On [13:14:42] NeroVision DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: Off [13:14:42] NeroVision CdRomPeripheral : TOSHIBA DVD-ROM SD-R5112 atapi Port 1 ID 0 DMA: On [13:14:42] NeroVision CdRomPeripheral : HL-DT-ST RW/DVD GCC-4480B atapi Port 1 ID 1 DMA: On [13:14:42] NeroVision === CDRom-Device-Map === [13:14:42] NeroVision TOSHIBA DVD-ROM SD-R5112 F: CDRom0 [13:14:42] NeroVision HL-DT-ST RW/DVD GCC-4480 E: CDRom1 [13:14:42] NeroVision ======================= [13:14:42] NeroVision AutoRun : 1 [13:14:42] NeroVision Excluded drive IDs: [13:14:42] NeroVision WriteBufferSize: 74448896 (0) Byte [13:14:42] NeroVision ShowDrvBufStat : 0 [13:14:42] NeroVision BUFE : 0 [13:14:42] NeroVision Physical memory : 510MB (523248kB) [13:14:42] NeroVision Free physical memory: 106MB (108832kB) [13:14:42] NeroVision Memory in use : 79 % [13:14:42] NeroVision Uncached PFiles: 0x0 [13:14:42] NeroVision Use Static Write Speed Table: 0 [13:14:42] NeroVision Use Inquiry : 1 [13:14:42] NeroVision Global Bus Type: default (0) [13:14:42] NeroVision Check supported media : Disabled (0) [13:14:42] NeroVision 13.7.2004 [13:14:42] NeroVision NeroAPI [13:14:42] NeroVision Existing drivers: [13:14:42] NeroVision File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32 [13:14:42] NeroVision File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 09:53:04 [13:14:42] NeroVision File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 30/07/2003 03:02:00 (Prassi/Veritas driver for win 2K) [13:14:42] NeroVision File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 13:57:34 (InCD4 driver for win NT/2K/XP) [13:14:42] NeroVision File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 13:57:52 (InCD4 driver for win NT/2K/XP) [13:14:42] NeroVision File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 13:59:24 (InCD4 driver for win NT/2K/XP) [13:14:42] NeroVision Registry Keys: [13:14:42] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Help
IMyself DMA is OFF on one of your hard drives. All drives should have DMA ON. http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx http://www.mrbass.org/dvdnewbie/ Having Nero InCD installed is a known problem for DVD burning. Any time there is any kind of problem burning DVD's I would recommend uninstalling InCD. There can be problems using the burning part of NeroVision. It may be better to use the DVD files that NeroVision makes and burn them with Nero Burning ROM.
Thanks for that. No idea why its turning DMA off on one of the drives. It's set to auto detect. I'll uninstall InCD now and see if that helps, although it managed to burn no problem with that there until last night. I've tried turning DMA back on, but it's not having it. I wonder if it's got something to do with WinXP SP2, as I installed that recently.
You may have to check in your BIOS Setup and make sure that DMA is enabled for that and all device's. The link above also explains how if a device gets a certain number of errors DMA will be disabled. You should then right click on the drive in Device Manager and uninstall it and reboot. If you still can't get DMA you should right click on the IDE channel it is on and uninstall the IDE channel and reboot.
