Hello lords and ladies... got a brand new Lite-On LH20-A1L (SATA) from NewEgg and have spent most of this evening making Verbatim coasters, which really stings because its Verbatim! Anyway, I keep getting these "Drive not ready" errors. I have SATA hard drive as well, only SATA bios options I could find are IDE or RAID settings, so that's no help. The DVD video in question is re-authored from DVD Shrink 3.2.0.15 from DVDFab Decrypter 4.1.0.2 and all this from a clean install of XP that was done today. Here's my log file from Nero: Code: ********** Nero Recode Essentials ********** Version: 2.5.6.0 Project type: Copy entire DVD Compilation name: temp Target size: DVD5 (2282925) 23:07:36 File LangStreamPatcher.cpp, Line 56 Command table patching started... 23:07:36 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: LITE-ON DVDRW LH-20A1L Number of copies: 1 Write speed: 16620 KB/s Temp folder: D:\My Documents\Nero Recode\VIDEO_TS (24746909696 bytes free) Direct burning: false Target media: DVD R/RW, DVD R DL, DVD-RAM Shutdown when finished: false Advanced Analysis: false Compress Adaptive: true 23:07:44 File burn_dvdfiles.cpp, Line 238 Compile DVD: init VTS_01 Title Vobs [13266 vobus] 3833.21MB -> 3828.04MB [R 1.00] Video: 3410.48MB, extra: 417.55MB Audio: 1 streams 0. 0. Dolby Digital 5.1-ch English 375.19MB [enabled] Subpicture: 4 streams 0. 0. English 2.86MB [enabled] 1. 1. French 2.11MB [disabled] 2. 2. Spanish 3.07MB [disabled] 3. 3. English 13.59MB [enabled] VTS_02 Title Vobs [2465 vobus] 630.59MB -> 630.15MB [R 1.00] Video: 595.21MB, extra: 34.93MB Audio: 1 streams 0. 0. Dolby Digital 2-ch English 29.90MB [enabled] Subpicture: 3 streams 0. 0. English 0.22MB [enabled] 1. 1. French 0.22MB [disabled] 2. 2. Spanish 0.22MB [disabled] 23:07:44 File burn_dvdfiles.cpp, Line 1244 Compile DVD: begin copy 1 23:07:45 File NeroRecorderBase.cpp, Line 517 Writing to disc: D 23:07:45 File NeroRecorderBase.cpp, Line 531 Free capacity on disc: 2283085 sectors (2295104) 23:07:45 File burn_dvdfiles.cpp, Line 548 Compile DVD: burning 2283085 sectors (2282689 required) 23:07:45 File burn_dvdfiles.cpp, Line 744 Compile DVD: adjust target size to 4459.15MB (4458.38MB obtained) 23:07:45 File burn_dvdfiles.cpp, Line 594 Compiling DVD Volume started 23:09:06 File NeroRecorder.cpp, Line 629 Added extra file VTS_01_2.VOB 23:10:23 File NeroRecorder.cpp, Line 629 Added extra file VTS_01_3.VOB 23:11:36 File NeroRecorder.cpp, Line 629 Added extra file VTS_01_4.VOB 23:12:25 File burn_dvdfiles.cpp, Line 1150 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 3833.21MB -> Expected 3828.04MB -> Output 3826.70MB Finished error -1.34MB Ratio encoded = 542 Original encoded = 12724 Slide encoded = 0 StillImage encoded = 0 Output extra size = 406.54MB Source video size = 3421.24MB Pictures Modified [I 86] [P 340] [B 3626] 23:13:05 File burn_dvdfiles.cpp, Line 1150 Compile DVD: finished VTS_02 Title Vobs VTS_02 Title Vobs: Original 630.59MB -> Expected 630.15MB -> Output 628.88MB Finished error -2.61MB Ratio encoded = 0 Original encoded = 2465 Slide encoded = 0 StillImage encoded = 0 Output extra size = 34.57MB Source video size = 594.30MB Pictures Modified [I 0] [P 0] [B 0] 23:13:06 File burn_dvdfiles.cpp, Line 617 Compile DVD: completed successfuly (4455.77MB) 23:13:06 File NeroRecorderBase.cpp, Line 1392 Burning 11 files with total size of 4672210944 bytes on hard disk 23:13:06 File burn_dvdfiles.cpp, Line 1244 Compile DVD: begin copy 1 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 1:43:16 PM NT-SPTI used Nero API version: 7.10.1.2 Using interface version: 7.5.0.2 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Internal Version: 7, 10, 1, 2 Recorder: <LITE-ON DVDRW LH-20A1L> Version: BL05 - HA 1 TA 0 - 7.10.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1L E: CdRom0 Generic DVD-ROM F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1046956kB) Free physical memory: 613MB (628440kB) Memory in use : 39 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.3.2008 NeroAPI 11:13:06 PM #1 Phase 112 File APIProgress.cpp, Line 285 DVD-Video files reallocation started 11:13:06 PM #2 Phase 114 File APIProgress.cpp, Line 285 DVD-Video files reallocation completed (no file modified) 11:13:06 PM #3 Phase 111 File APIProgress.cpp, Line 285 DVD-Video files sorted 11:13:06 PM #4 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:13:06 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 11:13:06 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 11:13:06 PM #7 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 11:13:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2281903 (507:05.28, 4456MB) 11:13:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 11:13:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: LITE-ON DVDRW LH-20A1L, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 11:13:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:13:07 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2281904 (2281904) = #2281904/507:5.29 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2281904 blocks [E: LITE-ON DVDRW LH-20A1L] -------------------------------------------------------------- 11:13:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW LH-20A1L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4673339392, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2281904 | 0 | 0x00 2281904 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:13:07 PM #14 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 11:13:07 PM #15 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-Yes (<32KB) 11:13:07 PM #16 Phase 24 File APIProgress.cpp, Line 285 Caching of files started 11:13:07 PM #17 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 11:13:07 PM #18 Phase 25 File APIProgress.cpp, Line 285 Caching of files completed 11:13:07 PM #19 Phase 36 File APIProgress.cpp, Line 285 Burn process started at 12x (16,620 KB/s) 11:13:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:13:07 PM #21 Text 0 File Cdrdrv.cpp, Line 9869 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:13:07 PM #22 Text 0 File DVDR.cpp, Line 7099 Drive: LITE-ON DVDRW LH-20A1L Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:13:07 PM #23 CDR -1207 File DVDR.cpp, Line 6477 Book Type automatically set to: DVD-ROM 11:13:07 PM #24 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 11:13:07 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 11:13:25 PM #26 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 Buffer x046f2780: Len xc 11:13:25 PM #27 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 Buffer x190b0080: Len x10000 0x01 00 02 00 09 00 00 00 88 6D F0 01 20 00 00 00 0x00 00 00 00 00 00 00 00 08 74 65 6D 70 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11:13:25 PM #28 CDR -1033 File Writer.cpp, Line 303 Drive not ready E: LITE-ON DVDRW LH-20A1L 11:13:26 PM #29 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 11:13:26 PM #30 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 11:13:26 PM #31 Phase 127 File APIProgress.cpp, Line 285 Generating DVD high compatibility borders 11:13:36 PM #32 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 32 11:13:36 PM #33 Text 0 File DVDR.cpp, Line 7099 Drive: LITE-ON DVDRW LH-20A1L Book Type request [LO], rev 3: DVD+R Changing the Book Type was finished successfully, return code 0 11:13:36 PM #34 CDR -1033 File WriterStatus.cpp, Line 162 Drive not ready E: LITE-ON DVDRW LH-20A1L 11:13:37 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 11:13:37 PM #36 Phase 38 File APIProgress.cpp, Line 285 Burn process failed at 12x (16,620 KB/s) 11:13:44 PM #37 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:13:46 PM #38 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 11:13:46 PM #39 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 23:13:50 File NeroRecorderBase.cpp, Line 1198 Burn failed (3) 23:13:50 File burn_dvdfiles.cpp, Line 308 Compile DVD: exit ----------------------------------- Any help will be greatly appreciated. Thanks in advance to all of you that understand Nero better then I do!
quick scan read... all looks pretty good? except maybe Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2281903 (507:05.28, 4456MB) set to 4300meg output Burn process failed at 12x (16,620 KB/s) and burn at 6x for testing -------------------------------- bios... i think on mine i have to turn on SATA, i know i have drivers for my 6x hd's sata in dual raid, not sure on single devices? is the devive seen in device manager and bios? have a good look into that bios if above 2 steps dont work, you may have to turn off raid for single use.
I set the size to 4300 like you suggested, but I still see the same sizes in the log. Did I do it wrong? I checked the Fit to Target box and set the custom size to 4300: Code: 12:45:34 AM #8 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2281887 (507:05.12, 4456MB) and 6x didn't make a difference either. As for bios stuff, I saw an option for "OnChip SATA" and it's Enabled and both my SATA devices appear to look the same in the bios and device manager... none of the raid settings are enabled. Another option I was curious about, under the File I/O options I tried both Windows Filesystem and SPTI/ASPI and neither worked. What about the Output DVD checkboxes for Removing Layer Break or P-UOPs? Right now they are checked. UPDATE -- potential problem: You know that "Safely Remove Hardware" icon that hides out in the sys tray: since I re-installed windows and added this drive my SATA devices are in there! What's up with that? Back when my just had my SATA drive and my old burner was IDE, the hard disk was never in there.
not got to much time at present need to shoot to work... but try burning with imgburn on build mode if dvd files, see if that work ok, if so its nero which has the problem! --------------------- yes to fit to target set at custom 4300 --------------------- try imgburn and we go from there... have a good day - laters all
Downloaded ImgBurn and still no luck! Got a Code: ScsiStatus: 0x02 Interpretation: Not Ready To Ready Change - Medium May Have Changed I also got: Code: I 21:01:49 Operation Started! I 21:01:49 Source File: D:\TEMP.ISO I 21:01:49 Source File Sectors: 2,285,847 (MODE1/2048) I 21:01:49 Source File Size: 4,681,414,656 bytes I 21:01:49 Source File Volume Identifier: TEMP I 21:01:49 Source File Volume Set Identifier: 00142B73DVDSHRNK I 21:01:49 Source File Implementation Identifier: DVD Shrink I 21:01:49 Source File File System(s): ISO9660, UDF (1.02) I 21:01:49 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATA) I 21:01:49 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x) I 21:01:49 Destination Media Sectors: 2,295,104 I 21:01:49 Write Mode: DVD I 21:01:49 Write Type: DAO I 21:01:49 Write Speed: 6x I 21:01:49 Link Size: Auto I 21:01:49 Test Mode: No I 21:01:49 OPC: Yes I 21:01:49 BURN-Proof: Enabled I 21:01:49 Book Type Setting: DVD-ROM I 21:01:50 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes W 21:02:07 Optimum Power Calibration Failed! - Reason: No Additional Sense Information W 21:02:07 Retrying (1)... W 21:02:14 Optimum Power Calibration Failed! - Reason: Logical Unit is in process of becoming ready I 21:02:14 Filling Buffer... (40 MB) I 21:02:14 Writing LeadIn... W 21:02:29 Failed to Write Sectors 0 - 31 - No Additional Sense Information W 21:02:29 Retrying (1 of 20)... W 21:02:37 Retry Failed - Not Ready To Ready Change - Medium May Have Changed W 21:02:37 Retrying (2 of 20)... W 21:02:52 Retry Failed - No Additional Sense Information .... W 21:06:04 Retrying (19 of 20)... W 21:06:12 Retry Failed - Not Ready To Ready Change - Medium May Have Changed W 21:06:12 Retrying (20 of 20)... W 21:06:27 Retry Failed - No Additional Sense Information E 21:06:45 Failed to Write Sectors 0 - 31 - No Additional Sense Information I 21:06:45 Synchronising Cache... W 21:06:49 User opted to skip the 'Close Track/Session/Disc' functions. E 21:06:49 Failed to Write Image! E 21:06:49 Operation Failed! - Duration: 00:04:59 I 21:06:49 Average Write Rate: N/A - Maximum Write Rate: N/A I tried using the drag-and-drop "Write Files to CD" in Windows with a blank CD-R and that errored as well. One of my friends at work suggested swapping the SATA cables on the motherboard... but it sounds like this is a bad burner to me.
hmm, yeah im at a loss here, can only be bios setting or drive... do you have a separate bios type interface for raid setup,,, i have 3 like bios on my motherboard as i have dual raid, so 2 place to get into raid and 1 for bios all on boot i wonder if its a setting in the raid bios not motherboard bios? whats your motherboad?
I have a Biostar P4M80-M4 I tried setting the bios from "IDE" to "RAID" just to see if that made a difference, now I get a "No raid devices" on startup, but that iddn't make a difference. I even tried swapping the SATA cables around between my drive and my burner, didn't make a difference. It's wierd that the drive can read CDs and DVDs just fine, but can't burn anything, but the LightScribe works just fine!
