Will someone please look at this log and help me get back to backing up/burning movies. I have tried burning at 4X, 8X and maximum and get this error or something similar every time. Thanks for you help!!!! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 0 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS DVD-E616P3H >Version: 1.04 - HA 0 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4166B E: CDRom0 ASUS DVD-E616P3H F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1014MB (1038764kB) Free physical memory: 543MB (556756kB) Memory in use : 46 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.6.2007 Burn DVD Image 8:08:03 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 8:08:03 AM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GWA-4166B running 8:08:03 AM #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:08:03 AM #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2203841 (489:44.41, 4304MB) 8:08:03 AM #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:08:03 AM #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 8:08:03 AM #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:08:03 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2203842 (2203842) = #2203842/489:44.42 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203842 blocks [HL-DT-ST DVDRRW GWA-4166B] -------------------------------------------------------------- 8:08:03 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513468416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2203842 | lead-out | 1 | 0x41 | 0x00 8:08:03 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:08:03 AM #11 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:08:03 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:08:03 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 8:08:03 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:08:03 AM #15 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 8:08:03 AM #16 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 8:09:30 AM #17 SCSI -1093 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0C550000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x02 0x00 8:09:30 AM #18 CDR -1093 File Writer.cpp, Line 311 No seek complete 8:09:31 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:09:31 AM #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:09:31 AM #21 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 8:09:31 AM #22 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 8:09:31 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Roxio and Nero don't play well together. Unisntall Roxio and run the clean tool. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml Media with YUDEN000T02 code Are yours fakes? Sense Key: 0x03 (KEY_MEDIUM_ERROR) generally means bad media. * Note: Genuine Taiyo Yuden YUDEN000T02 media have a serial number on the dye side near the hub in the form "TG******". Where * are numbers. * edit Could not display link to Taiyo Yuden YUDEN000T02 @ videohelp.com
I ran roxio zapper and got the following logfile when trying to burn. Ideas? Thanks again Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 0 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS DVD-E616P3H >Version: 1.04 - HA 0 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4166B E: CDRom0 ASUS DVD-E616P3H F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1014MB (1038764kB) Free physical memory: 415MB (425312kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.6.2007 Burn DVD Image 4:17:11 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 4:17:11 AM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GWA-4166B running 4:17:11 AM #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 4:17:11 AM #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2203841 (489:44.41, 4304MB) 4:17:11 AM #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 4:17:11 AM #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:17:11 AM #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:17:11 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2203842 (2203842) = #2203842/489:44.42 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203842 blocks [HL-DT-ST DVDRRW GWA-4166B] -------------------------------------------------------------- 4:17:11 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513468416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2203842 | lead-out | 1 | 0x41 | 0x00 4:17:11 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:17:11 AM #11 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 4:17:11 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:17:11 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 4:17:12 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:17:12 AM #15 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:17:12 AM #16 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 4:18:47 AM #17 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0C460000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 4:18:47 AM #18 CDR -1135 File Writer.cpp, Line 311 Write error 4:18:48 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:18:48 AM #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 4:18:48 AM #21 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 4:18:48 AM #22 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 4:18:48 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
CDRALW2K.SYS is Roxio's diver, so it is gone. Maybe you ran the Nero clean tool last time? edit PC locked up Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) This is a indication of poor media. That why I ask if the discs were genuine. You could try DVD Decrypter or Imgburn to burn a disc. Just to see what happens>
I have tried IMGburn a few times and always get an I/O error. This is what I ran for the Roxio Zapper -- Type of file - Application Description - roxizap I used the link from earlier post someone gave me. Maybe I didn't restart my computer after I ran the Zap. I'll try that and repost. Also got a new program that I am hoping might help, called System Mechanic 7 Pro. It seems to do a lot of clean up on here, so maybe if I have a software conflict it will be fixed. Crossing my fingers Thanks again for your help!
Also, I ordered the disks from the Supermediastore online. They seem to be reputable company, I hope. I notice I have a program called Sonic installed. Could that be conflicting ?
I have bought many discs from Supermediastore. They will do you right. Did you find out your's were fake or not. They may be ok. Sonic is said to conflict with Nero Did you try DVD Decrypter or Imgburn to burn a disc. They are free.
The disks seem to be real, and i have burned a stack of about 70 of these and now not able to burn using IMGburn and DVDD. Should I uninstall Sonic? I wonder if there is any way to burn the program to disc in case I want it later... ? When i burn with IMGburn and DVDD i get I/O errors. I just tried again and will post part another log in case something may have changed since i used roxio zapper. Thanks again! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 0 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS DVD-E616P3H >Version: 1.04 - HA 0 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4166B E: CDRom0 ASUS DVD-E616P3H F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1014MB (1038764kB) Free physical memory: 218MB (223696kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.6.2007 Burn DVD Image 2:55:37 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 2:55:37 PM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRRW GWA-4166B running 2:55:37 PM #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:55:37 PM #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2203841 (489:44.41, 4304MB) 2:55:37 PM #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 2:55:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 2:55:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:55:37 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2203842 (2203842) = #2203842/489:44.42 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203842 blocks [HL-DT-ST DVDRRW GWA-4166B] -------------------------------------------------------------- 2:55:37 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513468416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2203842 | lead-out | 1 | 0x41 | 0x00 2:55:37 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:55:37 PM #11 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 2:55:37 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:55:37 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 2:55:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 2:55:37 PM #15 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 2:55:37 PM #16 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 2:58:53 PM #17 SCSI -1119 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03A90000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x05 0x02 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x09 0x03 2:58:53 PM #18 CDR -1119 File Writer.cpp, Line 311 Track following error 2:58:53 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:58:53 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:58:53 PM #21 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 2:58:53 PM #22 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 2:58:53 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your using a lot of memory. You do not want to run out in the middle of burning. The rule of thumb for burning is burn at half of the rated speed of the media. So slow to 4x. Try uninstalling Nero and run the Nero clean tool. Then try Imgburn. No you need the setup exe file plus ... edit Here are Nero's clean tools. http://www.nero.com/nero7/enu/Clean_Tools.html
