HI, I have no probs burning except today. lol Im using Nero and the error is "Could not preform end of Disk-at-once anyone know anything about this? Thank you in advance
there could be many reasons why your Disk-at-once didn't burn or finalize! If you are burning on the fly, what are you burning? Is it a copy of a movie or is it a movie itself? you give very little information and to give a precise explanation I would need more information from you. tell us what you are copying and also copy and past your Nero log so we can examin what was being done and how you were doing it!
Here is the Log; I hope this helps Its a copy of a movie Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 3:24:34 AM ahead WinASPI: File 'C:\Program Files\Installed Programs\Nero\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 (Nero Express) Recorder: <BENQ DVD DD DW1620> Version: B7H9 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === DiskPeripheral : IC35L120AVV207-1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 3 ID 0 DMA: Off === CDRom-Device-Map === BENQ DVD DD DW1620 D: CDRom0 SONY CD-RW CRX300E E: CDRom1 Generic DVD-ROM F: CDRom2 AXV CD/DVD-ROM G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 131MB (134344kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.9.2005 UDF/ISO compilation 10:20:02 AM #1 Phase 112 File dlgbrnst.cpp, Line 1853 DVD-Video files reallocation started 10:20:02 AM #2 Phase 114 File dlgbrnst.cpp, Line 1853 DVD-Video files reallocation completed (no file modified) 10:20:02 AM #3 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 10:20:02 AM #4 Phase 111 File dlgbrnst.cpp, Line 1853 DVD-Video files sorted 10:20:02 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 10:20:02 AM #6 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1620 running 10:20:02 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:20:02 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 10:20:02 AM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 10:20:02 AM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2237967 (497:19.42, 4371MB) 10:20:02 AM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 10:20:02 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: BENQ DVD DD DW1620, Media type: DVD+R 10:20:02 AM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:20:02 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2237968 (2237968) = #2237968/497:19.43 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2237968 blocks [BENQ DVD DD DW1620] -------------------------------------------------------------- 10:20:02 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4583358464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2237968 | lead-out | 1 | 0x00 | 0x41 10:20:02 AM #16 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 10:20:02 AM #17 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 10:20:02 AM #18 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 10:20:02 AM #19 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 4x (5,540 KB/s) 10:20:02 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:20:03 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038E6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 10:20:03 AM #22 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 14:00,286 (840286ms) -> OK 10:20:03 AM #23 Text 0 File DVDPlusRW.cpp, Line 632 Start write address at LBA 0 DVD high compatibility mode: Yes 10:20:32 AM #24 SCSI -1176 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A4B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x01 10:20:32 AM #25 CDR -1176 File Writer.cpp, Line 311 Session fixation error 10:20:32 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:20:33 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:20:33 AM #28 SCSI -1176 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 10:20:33 AM #29 Phase 127 File dlgbrnst.cpp, Line 1853 Generating DVD high compatibility borders 10:20:33 AM #30 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 10:20:33 AM #31 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error 10:20:33 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 10:20:33 AM #33 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 10:20:33 AM #34 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/30/2003 12:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 3:24:34 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
attar..... you're looking at my signature and then your are looking at Mbrownab's nero log!!!!thinking that MBrownab's computer has my Ram!!!! hahahaha ok....
- update to latest, 6.6.0.16 - firmware's about 13months old, latest, B7W9 is here - http://support.benq.com/front/BenqM...langu=null&ops=2756&GenMenu=&RootId=undefined if that horrible looking link doesn't work, try this - http://support.benq.com/files/storage/Firmware/DVDRW/DW1620/B7W9.zip - sufficient total memory, but you're gonna have to free up more memory prior all to burns by closing down more programs - firmware's out of date as media not recognised properly, when firmware's updated, this should be a 3liner similar to this - - splat!, see previous comments
Hey Thanks for helping, but I updated the firmware, and still the same probs, I post the log; Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 3:24:34 AM ahead WinASPI: File 'C:\Program Files\Installed Programs\Nero\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 (Nero Express) Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.1 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === DiskPeripheral : IC35L120AVV207-1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX300E atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 3 ID 0 DMA: Off === CDRom-Device-Map === BENQ DVD DD DW1620 D: CDRom5 SONY CD-RW CRX300E E: CDRom1 Generic DVD-ROM F: CDRom2 AXV CD/DVD-ROM G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 147MB (151052kB) Memory in use : 71 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.10.2005 UDF/ISO compilation 12:57:05 AM #1 Phase 112 File dlgbrnst.cpp, Line 1853 DVD-Video files reallocation started 12:57:05 AM #2 Phase 114 File dlgbrnst.cpp, Line 1853 DVD-Video files reallocation completed (no file modified) 12:57:05 AM #3 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:57:05 AM #4 Phase 111 File dlgbrnst.cpp, Line 1853 DVD-Video files sorted 12:57:06 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 12:57:06 AM #6 Text 0 File Writer.cpp, Line 122 Writer BENQ DVD DD DW1620 running 12:57:06 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:57:06 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:57:06 AM #9 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 12:57:06 AM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2237967 (497:19.42, 4371MB) 12:57:06 AM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 12:57:06 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: BENQ DVD DD DW1620, Media type: DVD+R 12:57:06 AM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:57:06 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2237968 (2237968) = #2237968/497:19.43 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2237968 blocks [BENQ DVD DD DW1620] -------------------------------------------------------------- 12:57:06 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4583358464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2237968 | lead-out | 1 | 0x00 | 0x41 12:57:06 AM #16 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 12:57:06 AM #17 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 12:57:06 AM #18 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 12:57:06 AM #19 Phase 36 File dlgbrnst.cpp, Line 1853 Burn process started at 4x (5,540 KB/s) 12:57:06 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:57:06 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038E6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 12:57:06 AM #22 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 14:00,286 (840286ms) -> OK 12:57:06 AM #23 Text 0 File DVDPlusRW.cpp, Line 632 Start write address at LBA 0 DVD high compatibility mode: Yes 12:57:15 AM #24 SCSI -1015 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A4E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x73 0x02 12:57:15 AM #25 CDR -1015 File Writer.cpp, Line 311 Calibration area full 12:57:15 AM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:57:15 AM #27 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 12:57:15 AM #28 SCSI -1176 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x72 0x03 12:57:15 AM #29 Phase 127 File dlgbrnst.cpp, Line 1853 Generating DVD high compatibility borders 12:57:15 AM #30 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 12:57:15 AM #31 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error 12:57:15 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:57:15 AM #33 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 12:57:15 AM #34 Phase 38 File dlgbrnst.cpp, Line 1853 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/30/2003 12:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 3:24:34 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- update to latest, 6.6.0.16 - sufficient total memory, but you're gonna have to free up more memory prior all to burns by closing down more programs - right... your firmware's now real up to date but burner still isn't detecting what media you have, so the media must be newer than your firmware knows what to do with, and/or you're using media that's higher speed-rated than your burner can support. download dvd identifier (free) - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_identifier.cfm and 'identify' that media and paste details here....we're not gonna make much progress until your burner can detect the media... - splat!
@mbrownab - hiya. we need the dvd identifier to 'identify' one of those discs you're trying to burn to, to establish what exact disc manufacturer they are, the speed etc, as your burner's firmware can't recognise the discs, hence you're gonna keep having sporadic/or zero success. as i said, the firmware's right up to date and it's a popular burner so the media must be newer than your firmware knows what to do with, and/or you're using media that's higher speed-rated than your burner can support. insert one of those discs, run the proggy, click on the 'identify' button and paste the results here, we can then make recommendations on what media you should be using