I have some problame with burning with Nero Burn processes or simulation of burners it always reports errors so I saved the log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SV8004H atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 623MB (637972kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.9.2005 CueSheet 1:16:08 PM #1 Text 0 File Burncd.cpp, Line 2948 HL-DT-ST DVDRAM GSA-4163B Buffer underrun protection activated 1:16:09 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 1:16:09 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 1:16:09 PM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using CD-R/RW media 1:16:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 207311 ( 46:06.11) 1:16:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 1:16:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-4163B; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 1:16:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:16:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 191562 (191562) = #191562/42:34.12 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 191562 blocks [HL-DT-ST DVDRAM GSA-4163B] 1: TRM_AUDIO_NOPRE (Cue Sheet Track) 2 indices, index0 (0) provided original disc pos #0 + 15750 (15750) = #15750/3:30.0 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15750 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 1:16:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 450906624, ISRC "" 2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 450906624 450906624 487950624, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 191562 | 2 | 0 | 0x01 | 0x00 191562 | 2 | 1 | 0x01 | 0x00 207312 | lead-out | 1 | 0x01 | 0x00 1:16:09 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 1:16:09 PM #12 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 1:16:09 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 1:16:09 PM #14 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 8x (1,200 KB/s) 1:16:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:16:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #191562 1:16:09 PM #17 Text 0 File Mmc.cpp, Line 16924 StartDAO : CD-Text - Off 1:16:09 PM #18 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON 1:16:09 PM #19 Text 0 File Mmc.cpp, Line 17211 CueData, Len=40 41 00 00 34 00 00 00 00 41 01 00 21 00 00 00 00 41 01 01 21 00 00 02 00 01 02 01 00 00 2a 24 0c 01 aa 01 01 00 2e 06 0c 1:16:17 PM #20 Text 0 File Cdrdrv.cpp, Line 1286 13:16:17.531 - HL-DT-ST DVDRAM GSA-4163B\H1 T0 : Queue again later 1:16:37 PM #21 SCSI -1024 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04700000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1B 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x98 0x40 0xA6 0x80 0x08 0x03 1:16:37 PM #22 CDR -1024 File Writer.cpp, Line 311 Communication failure 1:16:37 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:16:37 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:16:49 PM #25 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 8x (1,200 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 6:07:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any ideas what can I do?
hiya... - firmware's 2 revs out of date, A105 is here - http://forum.rpc1.org/dl_firmware.php?download_id=1973 - if doing the firmware, and getting rid of InCD don't help, get better media.. - splat! - get rid of Nero's InCD, uninstall Nero, uninstall completely via Nero's Clean Tools ' http://www.nero.com/en/Clean_Tools.html' then reinstall Nero WITHOUT InCD
