Hi Recently tried to compress files with recode and unsure as to what went wrong. When i use burning rom it states that the files are now too big to burn? Here is the log from nero recode. Any help would be apprecitaed. ********** Nero Recode ********** Version: 2.2.8.5 Project type: Main Movie to DVD Target size: DVD5 (2282925) 08:36:45 File LangStreamPatcher.cpp, Line 56 Command table patching started... 08:36:45 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: Hard disk folder Number of copies: 1 Target folder: C:\Documents and Settings\Richard\My Documents\Nero Recode (83825500160 bytes free) Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 08:36:54 File burn_dvdfiles.cpp, Line 232 Compile DVD: init VTS_01 Title Vobs [9790 vobus] 4509.52MB -> 4458.72MB [R 0.98] Video: 4325.66MB, extra: 133.06MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 113.94MB [enabled] Subpicture: 0 streams 08:36:54 File burn_dvdfiles.cpp, Line 1182 Compile DVD: begin copy 1 08:36:54 File NeroRecorder.cpp, Line 123 Writing to harddrive folder started 08:36:54 File burn_dvdfiles.cpp, Line 714 Compile DVD: begin deep analysis 08:44:21 File burn_dvdfiles.cpp, Line 496 Compile DVD: burning 2282925 sectors (2282925 required) 08:44:21 File burn_dvdfiles.cpp, Line 542 Compiling DVD Volume started 08:46:47 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_2.VOB 08:48:54 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_3.VOB 08:51:00 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_4.VOB 08:53:02 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_5.VOB 08:53:32 File burn_dvdfiles.cpp, Line 1088 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4509.52MB -> Expected 4458.72MB -> Output 4460.25MB Finished error 0.00MB Ratio encoded = 9777 Original encoded = 13 Slide encoded = 0 StillImage encoded = 0 Output extra size = 133.05MB Source video size = 4376.47MB Pictures Modified [I 285] [P 1140] [B 97521] 08:53:34 File burn_dvdfiles.cpp, Line 565 Compile DVD: completed successfuly (4460.37MB)
Hmmm it's look like it's fine in size to fit by this in the log - Compile DVD: completed successfuly (4460.37MB) You have a teensy bit to spare. Open these files in Recode again and burn that way - there shouldn't be much if any compression at all. Under destination pick the burner instead of hard disk folder.
Did as you suggested and the burn was a success. So somewhere between saving to hard disk folder and using burning rom to compile and burn the project it increased the size of the files to excced alloted apce on my dvd? Any ideads or should I just do as you suggested and burn from Nero recode?
Heres the report of the successful burn. ********** Nero Recode ********** Version: 2.2.8.5 Project type: Main Movie to DVD Target size: DVD5 (2282925) 19:32:56 File LangStreamPatcher.cpp, Line 56 Command table patching started... 19:32:56 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: HL-DT-ST DVDRAM GSA-4163B Number of copies: 1 Write speed: 5540 KB/s Temp folder: C:\Documents and Settings\Richard\My Documents\Nero Recode (80048795648 bytes free) Direct burning: false Target media: DVD R/RW, DVD DL, DVD-RAM Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 19:33:23 File burn_dvdfiles.cpp, Line 232 Compile DVD: init VTS_01 Title Vobs [9720 vobus] 4480.22MB -> 4458.72MB [R 0.99] Video: 4326.62MB, extra: 132.10MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 113.12MB [enabled] Subpicture: 0 streams 19:33:24 File burn_dvdfiles.cpp, Line 1182 Compile DVD: begin copy 1 19:33:24 File NeroRecorderBase.cpp, Line 513 Writing to disc: D 19:33:24 File NeroRecorderBase.cpp, Line 527 Free capacity on disc: 2283092 sectors (2295104) 19:33:24 File burn_dvdfiles.cpp, Line 714 Compile DVD: begin deep analysis 19:43:00 File burn_dvdfiles.cpp, Line 496 Compile DVD: burning 2283092 sectors (2282925 required) 19:43:00 File burn_dvdfiles.cpp, Line 686 Compile DVD: adjust target size to 4459.16MB (4459.16MB obtained) 19:43:00 File burn_dvdfiles.cpp, Line 542 Compiling DVD Volume started 19:45:59 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_2.VOB 19:48:34 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_3.VOB 19:51:08 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_4.VOB 19:53:44 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_5.VOB 19:54:24 File burn_dvdfiles.cpp, Line 1088 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4480.22MB -> Expected 4459.05MB -> Output 4459.04MB Finished error -0.00MB Ratio encoded = 9487 Original encoded = 233 Slide encoded = 0 StillImage encoded = 0 Output extra size = 132.10MB Source video size = 4348.12MB Pictures Modified [I 21] [P 84] [B 79156] 19:54:26 File burn_dvdfiles.cpp, Line 565 Compile DVD: completed successfuly (4459.16MB) 19:54:26 File NeroRecorderBase.cpp, Line 1381 Burning 9 files with total size of 4675770368 bytes on hard disk 19:54:26 File burn_dvdfiles.cpp, Line 1182 Compile DVD: begin copy 1 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048044kB) Free physical memory: 460MB (471608kB) Memory in use : 55 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2007 NeroAPI 7:54:27 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 7:54:27 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 7:54:27 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 7:54:27 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 7:54:27 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 7:54:27 PM #6 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVDRAM GSA-4163B running 7:54:27 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 7:54:27 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 7:54:27 PM #9 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 7:54:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283631 (507:28.31, 4460MB) 7:54:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 7:54:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 7:54:27 PM #13 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:54:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283632 (2283632) = #2283632/507:28.32 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283632 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 7:54:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676878336, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283632 | lead-out | 1 | 0x41 | 0x00 7:54:27 PM #16 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 7:54:27 PM #17 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:54:27 PM #18 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 7:54:27 PM #19 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 7:54:27 PM #20 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 7:54:27 PM #21 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 4x (5,540 KB/s) 7:54:27 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:54:27 PM #23 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 7:54:27 PM #24 Text 0 File DVDR.cpp, Line 5719 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 7:54:27 PM #25 CDR -1207 File DVDR.cpp, Line 5649 Book Type automatically set to: DVD-ROM 7:54:27 PM #26 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 8:08:48 PM #27 Text 0 File WriterStatus.cpp, Line 116 <D: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2283632 (22D870h), length 0 blocks 8:08:48 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:09:19 PM #29 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 20:09:23 File burn_dvdfiles.cpp, Line 302 Compile DVD: exit
Edit out the serial # - it's in the middle of the log and begins w/ 4c. Don't need someone else using it. You know I'm not really sure why the file size increased. The 1st log shows the output of 4460.25MB and the burn log shows the input size of 4480.22MB - .20 mb more. You can burn straight from Recode. This one only has 1 audio but for future ones uncheck all but the 5.1 audio - will help some w/ the amount of compression used and help meet the target size. While we're at it update the drives firmware too - the latest is A106.
Sorry for above was trying to post a screenshot of burning rom for you. I recoded the movie again and tried to burn to hard disk. It still increased the size to exceed the limit for my cd. Yet i can burn with the burner through recode. I have updated my drive and rebooted prior to starting the last recode. Here is the Recode log. ********** Nero Recode ********** Version: 2.2.8.5 Project type: Main Movie to DVD Target size: DVD5 (2282925) 07:17:19 File LangStreamPatcher.cpp, Line 56 Command table patching started... 07:17:19 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: Hard disk folder Number of copies: 1 Target folder: C:\Documents and Settings\Richard\My Documents\Nero Recode (84498591744 bytes free) Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 07:17:35 File burn_dvdfiles.cpp, Line 232 Compile DVD: init VTS_01 Title Vobs [9790 vobus] 4509.52MB -> 4458.72MB [R 0.98] Video: 4325.66MB, extra: 133.06MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 113.94MB [enabled] Subpicture: 0 streams 07:17:35 File burn_dvdfiles.cpp, Line 1182 Compile DVD: begin copy 1 07:17:35 File NeroRecorder.cpp, Line 123 Writing to harddrive folder started 07:17:35 File burn_dvdfiles.cpp, Line 714 Compile DVD: begin deep analysis 07:28:28 File burn_dvdfiles.cpp, Line 496 Compile DVD: burning 2282925 sectors (2282925 required) 07:28:28 File burn_dvdfiles.cpp, Line 542 Compiling DVD Volume started 07:32:04 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_2.VOB 07:35:17 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_3.VOB 07:38:32 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_4.VOB 07:41:42 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_5.VOB 07:42:27 File burn_dvdfiles.cpp, Line 1088 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4509.52MB -> Expected 4458.72MB -> Output 4460.25MB Finished error -0.00MB Ratio encoded = 9776 Original encoded = 14 Slide encoded = 0 StillImage encoded = 0 Output extra size = 133.05MB Source video size = 4376.47MB Pictures Modified [I 241] [P 964] [B 97515] 07:42:30 File burn_dvdfiles.cpp, Line 565 Compile DVD: completed successfuly (4460.37MB) 07:42:30 File burn_dvdfiles.cpp, Line 302 Compile DVD: exit P.S.....What am i doing wrong with posting a screenshot?
To do the screen pick I used the 2nd url and put it between these tags Change the size to custom in Recode. Where you see dvd5 click on that scroll bar pick customer and type in 4360. Now I would hope Nero meets the target size when you want to burn later from the hard drive. edit to add: the screen shot is a bit to small for me to read though
Did as you suggested in reducing size in Recode, I then converted a different movie using Vision, thinking that it might have been just that one movie that I was Having trouble with. Recode completed the task with the reduced size but Burning Rom still increased the size. Version of burning rom is 7.0.8.2 I select DVD Video and "New" to start my compilation, select all the files and transfer to Video folder on left side of screen. It then shows that the file is has increased and burn will fail. Will try and post another screenshot plus the Recode log. ********** Nero Recode ********** Version: 2.2.8.5 Project type: Main Movie to DVD Target size: Custom (2232320) 16:54:47 File LangStreamPatcher.cpp, Line 56 Command table patching started... 16:54:47 File LangStreamPatcher.cpp, Line 135 All tables successfully patched! Burn settings: Target: Hard disk folder Number of copies: 1 Target folder: C:\Documents and Settings\Richard\My Documents\Nero Recode (79086800896 bytes free) Shutdown when finished: false Advanced Analysis: true Compress Adaptive: true 16:54:51 File burn_dvdfiles.cpp, Line 232 Compile DVD: init VTS_01 Title Vobs [12479 vobus] 5001.83MB -> 4359.86MB [R 0.80] Video: 4191.11MB, extra: 168.75MB Audio: 1 streams 0. 0. Dolby Digital 2-ch Unspecified 144.37MB [enabled] Subpicture: 0 streams 16:54:51 File burn_dvdfiles.cpp, Line 1182 Compile DVD: begin copy 1 16:54:51 File NeroRecorder.cpp, Line 123 Writing to harddrive folder started 16:54:51 File burn_dvdfiles.cpp, Line 714 Compile DVD: begin deep analysis 17:08:55 File burn_dvdfiles.cpp, Line 496 Compile DVD: burning 2232320 sectors (2232320 required) 17:08:55 File burn_dvdfiles.cpp, Line 542 Compiling DVD Volume started 17:16:14 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_2.VOB 17:22:52 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_3.VOB 17:29:18 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_4.VOB 17:32:07 File NeroRecorder.cpp, Line 609 Added extra file VTS_01_5.VOB 17:32:38 File burn_dvdfiles.cpp, Line 1088 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 5001.83MB -> Expected 4359.86MB -> Output 4376.96MB Finished error -0.01MB Ratio encoded = 12474 Original encoded = 5 Slide encoded = 0 StillImage encoded = 0 Output extra size = 169.60MB Source video size = 4832.24MB Pictures Modified [I 6215] [P 24860] [B 124726] 17:32:40 File burn_dvdfiles.cpp, Line 565 Compile DVD: completed successfuly (4377.10MB) 17:32:40 File burn_dvdfiles.cpp, Line 302 Compile DVD: exit
Something I just noticed is the filepath on the screenshot is different than what is setup in Nero Recode. Went to the filepath that is listed in Recode (C:\Documents and Settings\Richard\My Documents\Nero Recode)but with the same problem. Do you think that having two different filepaths may be the issue with burning rom?
I thinking that the folder that your saving the files to for some reason isn't empty when Recode saves the files there. Though Recode should give you a message saying this and giving you a prompt that it will delete the files if you click yes. You've burned straight from dvd with recode right and didn't have nay problems right? Ah I see you're a WoW player
Burning straight from Recode I haven't had an issue yet, it's only when I try and use Burning Rom. Recode does ask me if I want to overwrite and confirm by selecting "yes". I think I'll delete one of the filepaths and see if that works. My son plays WoW, I was an Age of Empires freak though!
lol - my daughter is a big WoW player. Check the folder before you save to the hard drive too. Delete any left over files - looks like it's just leaving 1 or 2 files in there for some reason. Nero should have deleted these files when you clicked yes bit for some reason it's not.
Well Im stumped but Burning Rom worked this time. I did delete the folder thinking that I had two seperate folders for Recode, but that wasn't the case. It just shows on Burning Rom display as My documents\NeroRecode files. I had to open and rename a new folder for Recode. To test it I compressed a movie and saved in the file, then compressed a different movie and overwrote what was in the file from the first movie. There were no problems and Burning Rom completed successfully. Will keep in mind to empty folder if I have the same issue. Thanks for your help it is much appreciated.
Your welcome JustBruin You might just want to delete the files in the folder 1st instead of letting Recode do it - seems like it not always cleaning them all at. Happy Burning!
