Hi to all whew sorry I've been so long in responding . It's been a busy Xmas hope all had a good one and wish all a Happy New year. We both are trying to burn vidio's to no sucess . I can do music cd's but not vidio so here is the last part of my nero log . Recorder: <HL-DT-ST RW/DVD GCC-4520B>Version: 1.00 - HA 1 TA 1 - 5.5.9.9 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: < 16X16 DVD DUAL> Version: 1020 - HA 1 TA 0 - 5.5.9.9 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 1 DMA: On CdRomPeripheral : 16X16 DVD DUAL atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4520B atapi Port 1 ID 1 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 34603008 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 43MB (44220kB) Memory in use : 83 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 29.12.2005 CD-ROM (MP3) 10:34:13 PM #1 Text 0 File Isodoc.cpp, Line 6003 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:34:13 PM #2 Phase 90 File dlgbrnst.cpp, Line 1566 Buffer Underrun Protection activated 10:34:13 PM #3 Text 0 File Reader.cpp, Line 118 Reader running 10:34:13 PM #4 Text 0 File Writer.cpp, Line 134 Writer HL-DT-ST RW/DVD GCC-4520B running 10:34:13 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4488 First writeable address = 0 (0x00000000) 10:34:14 PM #6 Text 0 File Burncd.cpp, Line 3542 Turn on Track-At-Once, using CD-R/RW media 10:34:14 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 663 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 206863 (206863) = #206863/45:58.13 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 10:34:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 199 Last possible write address on media: 359845 (79:59.70) Last address to be written: 206862 (46:00.12) 10:34:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 204 Write in overburning mode: FALSE 10:34:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 1403 Recorder: HL-DT-ST RW/DVD GCC-4520B; CDRW code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 10:34:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 815 Prepare recorder HL-DT-ST RW/DVD GCC-4520B for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Close CD Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 423962624 10:34:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 843 Removed 2 run-out blocks from end of track 1. 10:34:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 663 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 206863 (206863) = #206863/45:58.13 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 206861 blocks [HL-DT-ST RW/DVD GCC-4520B] -------------------------------------------------------------- 10:34:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1566 Caching of files started 10:35:38 PM #15 Phase 25 File dlgbrnst.cpp, Line 1566 Caching of files completed 10:35:39 PM #16 Phase 36 File dlgbrnst.cpp, Line 1566 Burn process started at 16x (2,400 KB/s) Thanks for trying to help and again Happy New year to all
What are you trying to burn? That's your nero's version. You may have to go to the nero site and download nero6. Make sure you leave out the INCD packet,that will cause problems. In this log,I can't find the MID code of your blank media. What is the brand name/format/and speed rate of your blank discs? This looks like part of a cd burn log,not dvd. Your nero version looks like the likely culprit.
