Hi, I recently upgraded my PC (CPU, Motherboard, Ram) and since this upgrade my DVD-RW has stopped working. Nero reports: nero could not perform end of disc-at-once It seems the writer is not "closing" the discs. After some googling i saw a lot about DMA (Not applicable since im using SATA) and also cables. Ive replaced the cables with no change, since DMA isnt an answer im not sure what else to do. Her eis my logfile from the last simulation (wasted about 20 discs so started using simulations ) Windows Vista 6.1 AMD64 Wow64Process WinAspi: - NT-SPTI used Nero Version: 8.3.6.0 Internal Version: 8, 3, 6, 0 Recorder: <PIONEER DVD-RW DVR-215> Version: 1.22 - HA 1 TA 0 - 8.3.6.0 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2000kB Bus Type : default CD-ROM: <RWF LI3GTUF4 >Version: 1.03 - HA 1 TA 1 - 8.3.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === : AMD 2+0 Stripe/RAID01.10 ahcix64s Port 2 ID 0 DMA: Off : PIONEER DVD-RW DVR-215 1.22 ahcix64s Port 2 ID 1 DMA: Off : AMD RAID Console 1.00 ahcix64s Port 2 ID 10 DMA: Off : Seagate ST3750523AS CC34 ahcix64s Port 2 ID 3 DMA: Off CdRomPeripheral : RWF LI3GTUF4 1.03 aehim2g2 Port 3 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-215 E: CdRom0 RWF LI3GTUF4 I: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 4095MB (4194303kB) Free physical memory: 4095MB (4194303kB) Memory in use : 21 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.12.2010 CD-ROM (ISO) 17:20:05 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:20:05 #2 Text 0 File Isodoc.cpp, Line 6713 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:20:05 #3 Text 0 File Burncd.cpp, Line 3238 PIONEER DVD-RW DVR-215 Buffer underrun protection activated 17:20:05 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 17:20:05 #5 Text 0 File Burncd.cpp, Line 3568 Turn on Disc-At-Once, using CD-R/RW media 17:20:05 #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorCD' ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '1.02' to '1.02' 17:20:05 #7 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorCD' ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '1.02' to '1.02' 17:20:46 #8 ISO9660GEN -11 File Geniso.cpp, Line 3349 First writeable address = 0 (0x00000000) 17:20:46 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorCD' ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '1.02' to '1.02' 17:20:48 #10 Text 0 File DlgWaitCD.cpp, Line 311 Last possible write address on media: 359844 ( 79:59.69) Last address to be written: 358816 ( 79:46.16) 17:20:48 #11 Text 0 File DlgWaitCD.cpp, Line 323 Write in overburning mode: NO (enabled: CD) 17:20:48 #12 Text 0 File DlgWaitCD.cpp, Line 2948 Recorder: PIONEER DVD-RW DVR-215; CDR code: 00 97 15 17; OSJ entry from: Ritek Co. ATIP Data: Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70) Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid) 17:20:48 #13 Text 0 File DlgWaitCD.cpp, Line 497 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.) 17:20:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 754 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358817 (358817) = #358817/79:44.17 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358817 blocks [E: PIONEER DVD-RW DVR-215] -------------------------------------------------------------- 17:20:48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 956 Prepare [E: PIONEER DVD-RW DVR-215] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735164416, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 358817 | 0 | 0x00 358817 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 17:20:49 #16 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 17:20:49 #17 Text 0 File Burncd.cpp, Line 4359 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 17:20:49 #18 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 17:20:49 #19 Text 0 File Burncd.cpp, Line 4481 Cache writing successful. 17:20:49 #20 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 17:20:49 #21 Phase 32 File dlgbrnst.cpp, Line 1767 Simulation started at 32x (4,800 KB/s) 17:20:49 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2673 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:20:49 #23 Text 0 File MMC.cpp, Line 17846 StartDAO : CD-Text - Off 17:20:49 #24 Text 0 File MMC.cpp, Line 22530 Set BUFE: Buffer underrun protection -> ON 17:20:50 #25 Text 0 File MMC.cpp, Line 18074 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 4f 2e 11 17:20:50 #26 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 17:24:31 #27 Text 0 File WriterStatus.cpp, Line 245 <E: PIONEER DVD-RW DVR-215> start writing Lead-Out at LBA 358817 (579A1h), length 0 blocks 17:28:32 #28 SPTI -1169 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80 FF FF Buffer x028d17c0: Len x20 17:28:32 #29 CDR -1169 File ThreadedTransferInterface.cpp, Line 1820 Logical unit not ready, operation in progress E: PIONEER DVD-RW DVR-215 17:28:32 #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1820 Could not perform end of Disc-at-once 17:28:32 #31 SPTI -1067 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1067) CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 26 00 00 80 00 08 Buffer x0994e880: Len x3c 0x00 00 00 00 00 00 00 00 05 32 11 C4 08 00 00 00 0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17:28:33 #32 Phase 34 File dlgbrnst.cpp, Line 1767 Simulation failed at 32x (4,800 KB/s) 17:28:33 #33 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:28:33 #34 SPTI -1169 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80 FF FF 17:28:33 #35 SPTI -1169 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80 FF FF 17:28:33 #36 Text 0 File Cdrdrv.cpp, Line 11450 DriveLocker: UnLockVolume completed 17:28:33 #37 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Damn just noticed theres a section here stating about the fact i left a full cd in the drive before i started the sim, please ignore that
I tried updating nero with no effect, new log file: Windows 7 6.1 AMD64 Wow64Process WinAspi: - NT-SPTI used Nero Version: 10.0.10.100 Internal Version: 10,0,10,100 Recorder: <PIONEER DVD-RW DVR-215> Version: 1.22 - HA 1 TA 0 - 10.0.10.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2000kB Bus Type : via Inquiry data CD-ROM: <RWF LI3GTUF4 >Version: 1.03 - HA 1 TA 1 - 10.0.10.100 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === : AMD 2+0 Stripe/RAID01.10 ahcix64s Port 2 ID 0 DMA: Off : PIONEER DVD-RW DVR-215 1.22 ahcix64s Port 2 ID 1 DMA: Off : AMD RAID Console 1.00 ahcix64s Port 2 ID 10 DMA: Off : Seagate ST3750523AS CC34 ahcix64s Port 2 ID 3 DMA: Off CdRomPeripheral : RWF LI3GTUF4 1.03 aq7dvg66 Port 3 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-215 E: CdRom0 RWF LI3GTUF4 I: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 4095MB (4194303kB) Free physical memory: 4095MB (4194303kB) Memory in use : 23 % Uncached PFiles: 0x0 Global Bus Type: default (0) Check supported media : Disabled (0) 28.12.2010 CD-ROM (ISO) 22:11:51 #1 Text 0 File SCSIPTICommands.cpp, Line 464 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 22:11:51 #2 Text 0 File Isodoc.cpp, Line 6956 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 22:11:51 #3 Text 0 File Burncd.cpp, Line 3238 PIONEER DVD-RW DVR-215 Buffer underrun protection activated 22:11:51 #4 ISO9660GEN -11 File Geniso.cpp, Line 3336 First writeable address = 0 (0x00000000) 22:11:52 #5 Text 0 File Burncd.cpp, Line 3568 Turn on Track-At-Once, using CD-R/RW media 22:11:54 #6 Text 0 File DlgWaitCD.cpp, Line 314 [E: DVD-RW DVR-215 ] Last possible write address on media: 359842 Last address to be written: 358831 22:11:54 #7 Text 0 File DlgWaitCD.cpp, Line 326 [E: DVD-RW DVR-215 ] Write in overburning mode: NO (enabled: CD) 22:11:54 #8 Text 0 File DlgWaitCD.cpp, Line 2890 Recorder: PIONEER DVD-RW DVR-215; CDR code: 00 97 15 17; OSJ entry from: Ritek Co. ATIP Data: Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70) Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid) 22:11:54 #9 Text 0 File DlgWaitCD.cpp, Line 499 [E: DVD-RW DVR-215 ] >>> Protocol of DlgWaitCD activities: <<< ========================================= 22:11:54 #10 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358832 (358832) = #358832/79:44.32 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358832 blocks [E: PIONEER DVD-RW DVR-215] -------------------------------------------------------------- 22:11:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1001 Prepare [E: PIONEER DVD-RW DVR-215] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735195136, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 358832 | 0 | 0x00 358832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 MediaType: CD-R 22:11:54 #12 Text 0 File SCSIPTICommands.cpp, Line 251 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 22:11:54 #13 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 22:11:54 #14 PHASE 24 File dlgbrnst.cpp, Line 1827 Caching of files started 22:11:54 #15 Text 0 File Burncd.cpp, Line 4400 Cache writing successful. 22:11:54 #16 PHASE 25 File dlgbrnst.cpp, Line 1827 Caching of files completed 22:11:54 #17 PHASE 32 File dlgbrnst.cpp, Line 1827 Simulation started at 32x (4,800 KB/s) 22:11:55 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2769 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 22:11:56 #19 Text 0 File MMC.cpp, Line 21660 Set BUFE: Buffer underrun protection -> ON 22:11:56 #20 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 22:19:28 #21 SPTI -1169 File SCSIPassThrough.cpp, Line 217 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 07 00 80 FF FF Buffer x04a90b00: Len x20 22:19:28 #22 CDR -1169 File ThreadedTransferInterface.cpp, Line 2128 Logical unit not ready, operation in progress E: PIONEER DVD-RW DVR-215 22:19:28 #23 TRANSFER -18 File ThreadedTransfer.cpp, Line 1222 Could not perform EndTrack 22:19:28 #24 SPTI -1067 File SCSIPassThrough.cpp, Line 217 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1067) CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 26 00 00 80 00 08 Buffer x04a94480: Len x3c 0x00 00 00 00 00 00 00 00 05 32 11 C4 08 00 00 00 0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 22:19:28 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1460 SetDriveCaps: Set LAST LBA of layer 1 to 0 22:19:29 #26 PHASE 34 File dlgbrnst.cpp, Line 1827 Simulation failed at 32x (4,800 KB/s) 22:19:29 #27 Text 0 File SCSIPTICommands.cpp, Line 301 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 22:19:29 #28 Text 0 File Cdrdrv.cpp, Line 11916 DriveLocker: UnLockVolume completed 22:19:29 #29 Text 0 File SCSIPTICommands.cpp, Line 464 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
I would really appreciate some help here guys, is this a software issue or is my drive knackered or what? The drive seems to read perfectly, i have installed windows twice from the drive with 0 errors. It just seems unable to "close" a disc and fails on a burn at the very end (after data has been written)
