Here is the log from my latest attempt: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.5.1.1 Internal Version: 7, 5, 1, 1 (Nero Express) Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB00 - HA 1 TA 0 - 7.5.1.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CDRW/DVD TSH492B>Version: TB04 - HA 1 TA 1 - 7.5.1.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: Off CdRomPeripheral : TSSTcorp CDRW/DVD TSH492B atapi Port 0 ID 1 DMA: Off DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW SH-S182D D: CDRom0 TSSTcorp CDRW/DVD TSH492B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (522316kB) Free physical memory: 77MB (79848kB) Memory in use : 84 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.9.2009 DVD-Copy on the fly 4:26:36 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:26:36 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540 ReadBuffer-Pipe got 72704KB of Memory 4:26:36 PM #3 Text 0 File Reader.cpp, Line 126 Reader running 4:26:36 PM #4 Text 0 File Writer.cpp, Line 123 Writer D: TSSTcorp CD/DVDW SH-S182D running 4:26:36 PM #5 Text 0 File DVDCopy.cpp, Line 316 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2262655 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 4:26:36 PM #6 Text 0 File DVDCopy.cpp, Line 431 Max -1 tracks of 1 allowed to copy 1: 0 - 2262655 = 2262655, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:26:36 PM #7 Text 0 File Burncd.cpp, Line 3443 Turn on Disc-At-Once, using DVD media 4:26:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 300 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2262654 (502:48.54, 4419MB) 4:26:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 312 Write in overburning mode: NO (enabled: CD) 4:26:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 2851 Recorder: TSSTcorp CD/DVDW SH-S182D, Media type: DVD-R Disc Manufacturer: SKC Co - .,Ltd. Disc Application Code: 64, Disc Physical Code: 193 4:26:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 484 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:26:36 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 863 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2262655 (2262655) = #2262655/502:48.55 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2262655 blocks [D: TSSTcorp CD/DVDW SH-S182D] -------------------------------------------------------------- 4:26:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1079 Prepare recorder [D: TSSTcorp CD/DVDW SH-S182D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4633917440, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2262655 | 2262655 | 0x00 0 | 1 | 1 | 0x41 | 2262655 | 2262655 | 0x00 2262655 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:26:36 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:26:36 PM #15 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 4:26:37 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2746 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:26:37 PM #17 Text 0 File DVDR.cpp, Line 2969 Recording mode: Sequential Recording Mode 4:26:37 PM #18 Text 0 File DVDR.cpp, Line 3125 Start write address at LBA 0 DVD high compatibility mode: Yes 4:26:37 PM #19 Text 0 File Cdrdrv.cpp, Line 9215 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:27:39 PM #20 Text 0 File Cdrdrv.cpp, Line 1290 16:27:39.912 - D: TSSTcorp CD/DVDW SH-S182D : Queue again later 4:28:25 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 07 40 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x062c0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4:28:25 PM #22 CDR -1135 File Writer.cpp, Line 312 Write error D: TSSTcorp CD/DVDW SH-S182D 4:28:25 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:28:25 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 4:28:25 PM #25 Text 0 File DVDR.cpp, Line 3341 EndDAO: Last written address was 1855 4:28:25 PM #26 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Can anyone tell me what the problem is?
dma is turned off(CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: Off ) this needs to be on below is a guide if your unsure how to http://forums.afterdawn.com/thread_view.cfm/260038 also i see you dont have much memory free .make sure you are not doing anything else while burning.hope this helps you.
Enable DMA as suggested, but I see an issue in your log that's most likely your problem. Here in this section: Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ All those zeros indicate that the drive's firmware doesn't recognize the disks you're using, the ID should be displayed here, but it's not. This could be why: Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB00 Your drives firmware is very old at version BB00, I looked it up at the Samsung site and found the latest version at SB06. Here's the site if you want a look http://www.samsung.com/us/support/search/supportSearchModelResult.do Here's the download link for the update: http://org.downloadcenter.samsung.c...FM/200706/20070622093010250_SH-S182D_SB06.zip Download, unzip/extract, run the file to update.
Thank you everyone for your help. I've updated the firmware and turned on the DMA. I'll let you know if I run into any more issues. Really appreciate it. Tom
thanks john your link was helpful to me too.I updated my firmware,it was also an old version.so thanks
