Nero failing to verify DVD writing

Discussion in 'Nero discussion' started by digiD, Sep 22, 2005.

  1. digiD

    digiD Guest

    I suddenly developed errors in writing dvd backups. THe writer can read & write all CDs without any problems, can also read DVDs without any problem but I am getting error while verifing the written data.

    What is causing this?
    Need help.
    Here the Log file

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <SAMSUNG DVD R/RW SH-W08A>Version: 1S30 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <IdeChnDr> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP4002H IdeChnDr Port 0 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP8004H IdeChnDr Port 0 ID 1 DMA: Off
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG DVD R/RW SH-W08A IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-RW GCE-8525B H: CDRom0
    SAMSUNG DVD R/RW SH-W08A G: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 502MB (514864kB)
    Free physical memory: 81MB (83044kB)
    Memory in use : 83 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    22.9.2005
    ISO compilation
    1:41:56 PM #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    1:41:57 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    1:41:57 PM #3 Text 0 File Writer.cpp, Line 122
    Writer SAMSUNG DVD R/RW SH-W08A running

    1:41:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    1:42:05 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    1:42:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2285071 (507:47.46, 4463MB)

    1:42:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    1:42:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: SAMSUNG DVD R/RW SH-W08A, Media type: DVD-R
    Disc Manufacturer: FUJIFI - LM03
    Disc Application Code: 64, Disc Physical Code: 193

    1:42:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:42:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285072 (2285072) = #2285072/507:47.47
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285072 blocks [SAMSUNG DVD R/RW SH-W08A]
    --------------------------------------------------------------

    1:42:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [SAMSUNG DVD R/RW SH-W08A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4679827456, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2285072 | lead-out | 1 | 0x41 | 0x00

    1:42:06 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    1:43:50 PM #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    1:43:50 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    1:43:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    1:43:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:43:51 PM #17 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    1:43:51 PM #18 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    1:43:51 PM #19 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:43:51 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:04:23 PM #21 Text 0 File WriterStatus.cpp, Line 116
    <SAMSUNG DVD R/RW SH-W08A> start writing Lead-Out at LBA 2285072 (22DE10h), lenght 0 blocks

    2:04:23 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:04:23 PM #23 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 2285071

    2:05:37 PM #24 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 8x (11,080 KB/s)

    2:05:37 PM #25 Phase 78 File dlgbrnst.cpp, Line 1832
    Data verification started

    2:10:27 PM #26 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x06 0xC9 0x30 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xC9 0x35 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    2:10:32 PM #27 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x06 0xCE 0x40 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xCE 0x48 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    2:10:32 PM #28 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 444720 to 444735

    2:10:55 PM #29 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x06 0xE2 0xF0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xE2 0xF4 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    2:10:55 PM #30 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 446016 to 446031

    _______________________________________________________
    The file say the same error to various sectors
    ______________________________________________________

    2:41:10 PM #990 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 517216 to 517231

    2:41:14 PM #991 Phase 40 File dlgbrnst.cpp, Line 1519
    Aborted by user

    2:41:16 PM #992 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B690A00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x07 0xE5 0x30 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x07 0xE5 0x37 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    2:41:16 PM #993 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 517344 to 517359


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 3:58:14 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 4/22/2002 12:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    digiD, Sep 22, 2005
    #1
  2. digiD

    digiD Guest

    Hope someone can answer this issue, I have burned 8 DVDs with all failing to verify.
     
    digiD, Sep 23, 2005
    #2
  3. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    [bold]CdRomPeripheral : SAMSUNG DVD R/RW SH-W08A IdeChnDr Port 1 ID 1 DMA: Off[/bold]

    DMA should be on for this device

    [bold]DPhysical memory : 502MB (514864kB)
    Free physical memory: 81MB (83044kB)
    [/bold]

    Free up more memory:shut down Anti-vir prog?

    Think you can do a simulation burn with disc in drive, but won't sacrifice disc.
     
    attar, Sep 23, 2005
    #3
  4. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    - that's Intel Application Accelerator. see this - http://forums.afterdawn.com/thread_view.cfm/232834, Intel Application Accelerator needs uninstalling as it's stopping you turn on DMA. haven't looked thru rest of log yet...
     
    creaky, Sep 23, 2005
    #4
  5. roysubs

    roysubs Member

    Joined:
    Sep 25, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11

    Hi, thank you for this posting, I thought it was just me that was getting this problem. Verification used to work perfectly, but I get verify errors on EVERY disc now (Nero 6.6.0.3). Whether an Intel or Microsoft update or whatever has caused this, I would like to do verification myself after the burn. How can I do this !?!?

    robocopy is not really ideal ?
    some kind of crc sha md5 checker and run it on the original folder on hard disk and then on the DVD ?
    some other DVD-VERIFICATION tool that basically just takes as input a hard disk folder and a dvd and then compares files and verifies if the disc is ok ?
    I can't really rely on Nero at the moment, as I've got reproducable proof that the verification is wrong, but please, if anynoe can advise of a good DVD Verification tool, I will turn off Nero verification and use that instead ?

    Hopefully some way around this can be found, as verification failure on every DVD that I write (according to Nero) does not give me a warm-and-friendly feeling about my archived data !

    Thanks/Regards,

    Roy.


     
    roysubs, Sep 25, 2005
    #5
  6. digiD

    digiD Guest

    Thanks for all the replies.

    For some reason I cannot un-install intel application accelator, & yes I am indeed struggeling to figure out where is that option disappeared where I could switch ON the DMA. Now I know the problem.

    I am going to try further & post the results.

    Thanks again.
     
    digiD, Sep 25, 2005
    #6
  7. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    attar, Sep 25, 2005
    #7
  8. digiD

    digiD Guest

    Thanks for that pdf,
    I had tried earlier to that, but after un-installing & rebooting it still does not show me the advance setting tabs.............seems I need to get rid of intel AA, & somehow I cant uninstall it.

    I took the suggestions 1 by 1 & tried a sucessful DVD burn with verification all going right. I turned down all application, so the Ram is all available to nero.

    It finally worked......seems the ram is also an issue.
    Will report back after the DMA is turned ON.

    Thanks.
     
    digiD, Sep 25, 2005
    #8
  9. digiD

    digiD Guest

    I reinstalled the Intel AA & then sucessfully un-installed it, rebooted & there you go......................DMA is now available & its now ON on all devices.

    Thanks you all for solving this issue.
     
    digiD, Sep 25, 2005
    #9
  10. digiD

    digiD Guest

    Problem still not solved

    Tried doing a dvd & verification still failed, now could it be firmware isuue or bad dvd media, though I am using the same batch media past 3 months now.

    This time DMA is enabled on all devices, 250 mb ram remains free, still having problems.

    Here is the log:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <SAMSUNG DVD R/RW SH-W08A>Version: 1S30 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP4002H atapi Port 0 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP8004H atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG DVD R/RW SH-W08A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST CD-RW GCE-8525B G: CDRom0
    SAMSUNG DVD R/RW SH-W08A H: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 502MB (514864kB)
    Free physical memory: 250MB (256388kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.9.2005
    ISO compilation
    11:28:19 AM #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    11:28:20 AM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    11:28:20 AM #3 Text 0 File Writer.cpp, Line 122
    Writer SAMSUNG DVD R/RW SH-W08A running

    11:28:20 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    11:28:29 AM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    11:28:30 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2256879 (501:31.54, 4407MB)

    11:28:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    11:28:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: SAMSUNG DVD R/RW SH-W08A, Media type: DVD-R
    Disc Manufacturer: FUJIFI - LM03
    Disc Application Code: 64, Disc Physical Code: 193

    11:28:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:28:30 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2256880 (2256880) = #2256880/501:31.55
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2256880 blocks [SAMSUNG DVD R/RW SH-W08A]
    --------------------------------------------------------------

    11:28:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [SAMSUNG DVD R/RW SH-W08A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4622090240, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2256880 | lead-out | 1 | 0x41 | 0x00

    11:28:30 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:30:58 AM #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    11:30:58 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:30:59 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    11:31:00 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:31:00 AM #17 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    11:31:00 AM #18 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    11:31:00 AM #19 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:31:00 AM #20 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:52:10 AM #21 Text 0 File WriterStatus.cpp, Line 116
    <SAMSUNG DVD R/RW SH-W08A> start writing Lead-Out at LBA 2256880 (226FF0h), lenght 0 blocks

    11:52:10 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:52:10 AM #23 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 2256879

    11:53:25 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 8x (11,080 KB/s)

    11:53:26 AM #25 Phase 78 File dlgbrnst.cpp, Line 1832
    Data verification started

    11:53:59 AM #26 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:01 AM #27 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x10 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:05 AM #28 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x20 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:07 AM #29 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x30 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x30 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:12 AM #30 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x40 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:14 AM #31 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x50 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x50 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:19 AM #32 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x60 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:21 AM #33 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x70 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x70 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:27 AM #34 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0x80 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x80 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:32 AM #35 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0xA0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xA0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:54:32 AM #36 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 0 to 143

    11:54:35 AM #37 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xC0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:54:35 AM #38 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 160 to 175

    11:54:36 AM #39 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0xD0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xD1 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:54:41 AM #40 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xE0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:54:43 AM #41 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x00 0xF0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0xF0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:48 AM #42 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:50 AM #43 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x10 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x10 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:54:55 AM #44 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x20 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x20 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:54:58 AM #45 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x30 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x30 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:02 AM #46 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x40 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x40 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:03 AM #47 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x50 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x50 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:09 AM #48 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x60 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x60 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:11 AM #49 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x70 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x70 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:17 AM #50 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x80 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x80 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:19 AM #51 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0x90 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0x90 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:22 AM #52 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0xA0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0xA0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:29 AM #53 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x06
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0xC0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x06

    11:55:29 AM #54 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 192 to 431

    11:55:31 AM #55 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x01 0xE0 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:31 AM #56 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 448 to 463

    11:55:36 AM #57 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x00 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:36 AM #58 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 480 to 495

    11:55:41 AM #59 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x20 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:41 AM #60 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 512 to 527

    11:55:43 AM #61 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x02 0x30 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x30 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:50 AM #62 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x02 0x50 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x51 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:50 AM #63 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 544 to 575

    11:55:53 AM #64 Phase 40 File dlgbrnst.cpp, Line 1519
    Aborted by user

    11:55:54 AM #65 SCSI -1128 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B091600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x11
    Sense Qual: 0x00
    CDB Data: 0x28 0x00 0x00 0x00 0x02 0x70 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x02 0x70 0x0A
    0x00 0x00 0x00 0x00 0x11 0x00

    11:55:54 AM #66 SectorVerify 20 File Cdrdrv.cpp, Line 9938
    Read errors from sector 592 to 607


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 3:58:14 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    digiD, Sep 25, 2005
    #10
  11. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @digiD -

    - your firmware's one version behind, 1S31 is here - http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=28

    - can't help you there, i don't know much about Fuji discs

    - most people recommend 4x burns for movies

    - that burner's not a happy bunny with something. see if updating the firmware and lowering burn speed helps...
     
    creaky, Sep 26, 2005
    #11

Share This Page