I know there are also other threads about this but I can't seem to fix my problem when I try to burn data to a DVD-R. I've tried reinstalling Nero, updating my Nero, and updating my firmware. Please help Thanks in advance Heres the log: ----------------------------------------------------------------------- Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <_NEC DVD+-RW ND-3530A> Version: 104C - HA 1 TA 0 - 7.10.1.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.0 - HA 1 TA 1 - 7.10.1.0 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-3530A atapi Port 1 ID 0 DMA: On CdRomPeripheral : QR7294E OPU450N 1.0 atl4fjq9 Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-3530A D: CdRom0 QR7294E OPU450N E: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1021MB (1046508kB) Free physical memory: 408MB (418440kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.7.2007 ISO compilation 10:25:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:25:01 PM #2 Text 0 File Isodoc.cpp, Line 6666 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:25:01 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 10:25:01 PM #4 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 10:25:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 562783 (125:03.58, 1099MB) 10:25:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:25:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: _NEC DVD+-RW ND-3530A, Media type: DVD-R Disc Manufacturer: MJC M0 - 05 Disc Application Code: 64, Disc Physical Code: 193 10:25:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:25:01 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 562784 (562784) = #562784/125:3.59 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 562784 blocks [D: _NEC DVD+-RW ND-3530A] -------------------------------------------------------------- 10:25:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: _NEC DVD+-RW ND-3530A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1152581632, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 562784 | 0 | 0x00 562784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:25:01 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:25:01 PM #12 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 10:25:01 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 10:25:01 PM #14 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 10:25:01 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 10:25:01 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 10:25:01 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:25:01 PM #18 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 10:25:01 PM #19 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 10:25:01 PM #20 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`...0@P........ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:25:01 PM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 08 96 60 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 10:25:01 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752 Illegal disc D: _NEC DVD+-RW ND-3530A 10:25:01 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752 Could not perform start of Disc-at-once 10:25:01 PM #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 10:25:02 PM #25 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11,080 KB/s) 10:25:02 PM #26 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:25:04 PM #27 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 10:25:04 PM #28 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I figured I might as well post here instead of starting a new thread. I've been burning with the previous version of nero I had (can't recall, might've been a 7 something) with the same drive and the same discs since ever, but then it stopped and keeps giving me two (?) errors "could not perform disc-at-once" and "Illegal disc". I uninstalled and installed another version of it, which was suggested at a forum, still nothing. I can hardly imagine the discs being the problem since I've been using the same discs the whole time (MAXELL 4.7GB DVD-R single sided 1-16x). I don't recall making any updates either. I hope someone can help. The log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2.11.2004 12:54:32 NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 (Nero Express) Recorder: <_NEC DVD_RW ND-3530A> Version: 1.80 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-3530A >Version: 1.80 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1600BB-55GUC0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3530A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3530A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte BUFE : 0 Physical memory : 447MB (458096kB) Free physical memory: 125MB (128248kB) Memory in use : 72 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.7.2007 ISO compilation 17:57:37 #1 Text 0 File Isodoc.cpp, Line 6423 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:57:37 #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 17:57:37 #3 Text 0 File Reader.cpp, Line 124 Reader running 17:57:37 #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 17:57:39 #5 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 17:57:39 #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2269567 (504:20.67, 4432MB) 17:57:39 #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO 17:57:39 #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: _NEC DVD_RW ND-3530A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 17:57:39 #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:57:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2269568 (2269568) = #2269568/504:20.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269568 blocks [D: _NEC DVD_RW ND-3530A] -------------------------------------------------------------- 17:57:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: _NEC DVD_RW ND-3530A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4648075264, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2269568 | lead-out | 1 | 0x41 | 0x00 17:57:39 #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:57:39 #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:57:39 #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 17:57:39 #15 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 17:57:39 #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 17:57:39 #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2.4x (3 324 KB/s) 17:57:39 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:57:39 #19 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 17:57:39 #20 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 17:57:39 #21 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:57:39 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 A1 80 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 17:57:39 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: _NEC DVD_RW ND-3530A 17:57:39 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 17:57:39 #25 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 2.4x (3 324 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ok I'll try that, even though I'm not using Ritek Just one question, how is it possible for it to stop working when it's been working fine before with the same discs?
The log indicates that the disks carry a Ritek ID and it's easier to eliminate the media and burning speed as the cause than anything else.. Good luck.
I need help w/ Nero too - I keep getting these damn illegal disc errors. I'm using Memorex 16x DVD-Rs & I know I should free up more memory, I just needed to save the log file from this attempt. I have the log file here: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Media Programs\Nero\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <CN0328G HZY421R >Version: 2.0B - HA 1 TA 2 - 6.6.1.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD300BB-00AUA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3120026A atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: On CdRomPeripheral : CN0328G HZY421R 2.0B vaxscsi Port 2 ID 0 DMA: Off CdRomPeripheral : HX1410V LDZ701B 1.0 alh023oj Port 3 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-2500A F: CDRom0 _NEC DVD_RW ND-2500A G: CDRom1 CN0328G HZY421R H: CDRom2 HX1410V LDZ701B I: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 226MB (231680kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.7.2007 Burn DVD Image 7:19:38 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 7:19:38 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 7:19:38 AM #3 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 7:20:00 AM #4 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2108453 (468:32.53, 4118MB) 7:20:00 AM #5 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 7:20:00 AM #6 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 7:20:00 AM #7 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW.) 7:20:00 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2108454 (2108454) = #2108454/468:32.54 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2108454 blocks [_NEC DVD_RW ND-2500A] -------------------------------------------------------------- 7:20:00 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [_NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4318113792, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2108454 | lead-out | 1 | 0x41 | 0x00 7:20:00 AM #10 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 7:20:00 AM #11 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:20:00 AM #12 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 7:20:01 AM #13 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 7:20:01 AM #14 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 7:20:01 AM #15 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2.4x (3,324 KB/s) 7:20:01 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:20:01 AM #17 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 7:20:01 AM #18 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 7:20:01 AM #19 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:20:01 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 289 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 20 2C 30 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 7:20:01 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc F: _NEC DVD_RW ND-2500A 7:20:01 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 7:20:01 AM #23 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Any help is most greatly appreciated!!!!
Newer firmware 1.0B available here. http://forum.rpc1.org/dl_firmware.php?download_id=1740 Look at the readme file in the zip;make sure it applies to your drive and check the link which addresses Ritek 16x disks. You could probably just switch to 'Verbatim' and burn at 4x without the upgrade.
I'm a total newb @ this & have only ever flashed the drive's firmware from the manufacturer's webpage. Ok, so which one do I DL? And what do the others do? NEC ND-2500A - 1.06 (20031219), 1.06 (20040108), 1.07, 1.09, 1.0A, 1.0B / 1.9A, 1.9B (only for Fujitsu/siemens OEM) Region Free (RPC-1) firmware Single Layer + Bitsetting firmware Double Layer + Bitsetting firmware It's safe if I follow the directions exactly, right? And what are the differences between the Windows & DOS versions? EDIT: If it matters @ all, the drive is a black Mad Dog Dominator somethingorother (4-in-1 or 8-in-1).
You have to judge whether it's ok to go ahead. The NEC site shows 1.0B as the latest update. The other software mentioned at the other site is for making the drive region free and bitsetting - none of it from NEC. http://www.de.nec.de/softwareoverview2.php/id/1333
Yet another question and problem with illegal disc error, I have used the flash thing to update firmware. but still get the error. the same thing happens no matter what I try to do data or make a dvd. but the cdrs do work. not the dvds. the discs are Nextech 16X. The Memorex 16X dvds work. do I just have 2 stacks of expensive small frisbees?
heres the latest log after I tried uninstalling the dvdrw then rebooting, the flash107 still says cannot find target correctly.