Hi, I saw that u have helped a lot of ppl with their burning problems, so I decided to ask for your help too. In short, after reinstall of windows, my dvd just stoped burning dvd's. I have done cd's but no dvd. I have tryed shampoo too, but the same thing had accure. Here's my log file: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 г. 13:54:32 NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.10 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LF9244K RHH929A >Version: 1.0 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On CdRomPeripheral : LF9244K RHH929A 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-1300A F: CDRom0 LF9244K RHH929A H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 259MB (265384kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.5.2007 ISO compilation 13:51:07 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 13:51:08 #2 Text 0 File Isodoc.cpp, Line 6509 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:51:08 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 13:51:08 #4 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 13:51:08 #5 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 382175 ( 84:55.50, 746MB) 13:51:08 #6 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 13:51:08 #7 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 13:51:08 #8 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:51:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 382176 (382176) = #382176/84:55.51 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 382176 blocks [F: _NEC DVD_RW ND-1300A] -------------------------------------------------------------- 13:51:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [F: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 782696448, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 382176 | 0 | 0x00 0 | 1 | 1 | 0x41 | 382176 | 0 | 0x00 382176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 13:51:28 #11 Text 0 File SCSIPTICommands.cpp, Line 231 Error on LockVolume: Access is denied. 13:51:28 #12 Text 0 File SCSIPTICommands.cpp, Line 277 SPTI - Error on DismountVolue: Access is denied. 13:51:38 #13 Text 0 File SCSIPTICommands.cpp, Line 231 Error on LockVolume: Access is denied. 13:51:38 #14 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 13:51:38 #15 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 13:51:38 #16 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 13:51:38 #17 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3 324 KB/s) 13:51:38 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:51:38 #19 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 13:51:38 #20 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 13:51:38 #21 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 13:51:38 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 05 D4 E0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 13:51:38 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1779 Illegal disc F: _NEC DVD_RW ND-1300A 13:51:38 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779 Could not perform start of Disc-at-once 13:51:38 #25 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 2.4x (3 324 KB/s) 13:51:38 #26 Text 0 File SCSIPTICommands.cpp, Line 277 SPTI - Error on DismountVolue: Access is denied. 13:51:42 #27 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 13:51:42 #28 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 26.10.2005 г. 23:12:48 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.8.2004 г. 23:59:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I thought doing that by reading the other treads about the same problem, but I was unsure which update shall I use. 1.10(as the version in the log file) or 1.16?
Thank for the help so far, I have tryed to install the 1.16, but it didn't even start to install. So I've updated to 1.11. But still wont burn dvd. With neither Nero or Ashampoo.
