I tried twice to burn an image file and all I've been able to do is make a couple of coasters. After the second failed attemt, I saved the log below. Any help would be appreciated. Thanks, Weed Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.2 Internal Version: 7, 10, 1, 2 Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AX03 - HA 1 TA 0 - 7.10.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVD+-RW SDVD8820>Version: AX03 - HA 1 TA 0 - 7.10.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BEAS-00KZT0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS DVD+-RW SDVD8820 atapi Port 3 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+-RW SDVD8820 D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte BUFE : 0 Physical memory : 446MB (456744kB) Free physical memory: 124MB (127428kB) Memory in use : 72 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2008 Burn DVD Image 11:27:26 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:27:27 AM #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 11:27:27 AM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286239 (508:03.14, 4465MB) 11:27:27 AM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 11:27:27 AM #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: PHILIPS DVD+-RW SDVD8820, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 11:27:27 AM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:27:27 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 2286240 (2286240) = #2286240/508:3.15 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286240 blocks [D: PHILIPS DVD+-RW SDVD8820] -------------------------------------------------------------- 11:27:28 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: PHILIPS DVD+-RW SDVD8820] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682219520, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2286240 | 2286240 | 0x00 2286240 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:27:28 AM #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 11:27:28 AM #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 11:27:28 AM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 11:27:28 AM #12 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 11:27:28 AM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 11:27:28 AM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 11:27:30 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:27:30 AM #16 Text 0 File DVDR.cpp, Line 3229 Recording mode: Sequential Recording Mode 11:27:30 AM #17 Text 0 File DVDR.cpp, Line 3385 Start write address at LBA 0 DVD high compatibility mode: Yes 11:27:30 AM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x0613d2c0: Len x648 11:27:30 AM #19 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:27:30 AM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 66059200 11:27:59 AM #21 Text 0 File Cdrdrv.cpp, Line 1352 11:27:59.640 - D: PHILIPS DVD+-RW SDVD8820 : Queue again later 11:30:57 AM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 3F E0 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x09158000: Len x10000 0x00 00 01 BA 44 01 9F E0 04 01 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 A8 A2 50 A1 EA 92 83 70 AB 0xC6 18 1C E4 69 28 A2 87 F4 07 DD F8 74 BA 28 8E 11:30:57 AM #23 CDR -1135 File Writer.cpp, Line 303 Write error D: PHILIPS DVD+-RW SDVD8820 11:30:57 AM #24 Text 0 File DVDR.cpp, Line 3787 EndDAO: Last written address was 16351 (3FDFh) 11:30:58 AM #25 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11,080 KB/s) 11:30:58 AM #26 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:31:00 AM #27 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 11:31:00 AM #28 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Try cutting back the burning speed to 4x and/or replace the CMC disks with known reliable media - Verbatim is a good brand.
