Do you guys have any experience with Nero ? I'm running 6.6.0.3 - and also about 3 other versions of nero, with the most updated software from nero.com. But as of 2 weeks ago, I cant copy on the fly, i was using the copy icon in nero for about 2 years...now all of the sudden, I cant copy on the fly anymore. I cant copy cds, dvds, games, authentic and authored. However, when i use DVD Decrypter, or dvd shrink, the program works...and I can copy the contents of the dvd to the hard drive with no problem...so the burner is not at fault. The problem is obviously within the application, but I dont understand how every single version is having a problem with this, after reinstalling every version i had to test. anyone able to assist ?
23.12.2004 ===== Disc-Copy over image - 1st step : Copy to image ... 10:31:09 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:31:09 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:31:09 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1768304 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:31:09 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1768304 = 1768304, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:31:09 PM #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 10:31:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 1768153 (392:55.28, 3453MB) 10:31:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 10:31:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:31:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:31:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1768304 (1768304) = #1768304/392:57.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1768304 blocks [Image Recorder] -------------------------------------------------------------- 10:31:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3621486592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1768304 | lead-out | 1 | 0x41 | 0x00 10:31:09 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:31:09 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:34:57 PM #14 SCSI -1093 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06321000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x06 0xC8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xC8 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 10:34:57 PM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 10:34:57 PM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1093 10:34:57 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:34:59 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed ===== Disc-Copy over image - 2nd step : Burn the image ... 10:31:09 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:31:09 PM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:31:09 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1768304 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:31:09 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1768304 = 1768304, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:31:09 PM #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 10:31:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 1768153 (392:55.28, 3453MB) 10:31:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 10:31:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:31:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:31:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1768304 (1768304) = #1768304/392:57.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1768304 blocks [Image Recorder] -------------------------------------------------------------- 10:31:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3621486592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1768304 | lead-out | 1 | 0x41 | 0x00 10:31:09 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:31:09 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:34:57 PM #14 SCSI -1093 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06321000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x06 0xC8 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x03 0x00 0x06 0xC8 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 10:34:57 PM #15 TRANSFER -25 File Reader.cpp, Line 382 Error reading data 10:34:57 PM #16 Text 0 File Reader.cpp, Line 385 Exception value: -1093 10:34:57 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:34:59 PM #18 Phase 22 File dlgbrnst.cpp, Line 1832 Reading disc failed Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 3/31/2003 7:00:00 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
