Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 (Nero Express) Recorder: <Memorex DVD+-RAM 530L v1>Version: 5M64 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY DVD RW DRU-510A >Version: 1.0d - HA 1 TA 1 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75FJA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Memorex DVD+-RAM 530L v1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === Memorex DVD+-RAM 530L v1 D: CdRom0 SONY DVD RW DRU-510A E: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1533MB (1570800kB) Free physical memory: 840MB (860656kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.6.2008 DVD-Copy on the fly 10:14:55 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:14:56 AM #2 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:14:56 AM #3 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:14:57 AM #4 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 640 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) S01 T02 Con 0x14 Start 656 Len 48 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) S01 T03 Con 0x14 Start 720 Len 2289120 NWA -1 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:14:57 AM #5 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 3 allowed to copy 1: 0 - 640 = 640, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 2: 656 - 704 = 48, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3: 720 - 2289840 = 2289120, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:14:57 AM #6 Text 0 File Burncd.cpp, Line 3508 Turn on Track-At-Once, using DVD-R/RW media 10:14:58 AM #7 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2289839 (508:51.14, 4472MB) 10:14:58 AM #8 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:14:58 AM #9 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: Memorex DVD+-RAM 530L v1, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:14:58 AM #10 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:14:58 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 656 (656) = #656/0:8.56 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640 blocks [D: Memorex DVD+-RAM 530L v1] 1: TRM_DATA_MODE1 (2 - Data (mode 1)) 2 indices, index0 (0) not provided original disc pos #656 + 64 (64) = #720/0:9.45 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48 blocks [D: Memorex DVD+-RAM 530L v1] 2: TRM_DATA_MODE1 (3 - Data (mode 1)) 2 indices, index0 (0) not provided original disc pos #720 + 2289120 (2289120) = #2289840/508:51.15 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289120 blocks [D: Memorex DVD+-RAM 530L v1] -------------------------------------------------------------- 10:14:58 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Memorex DVD+-RAM 530L v1] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 3: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1343488, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 1343488 1343488 1474560, ISRC "" 3: TRM_DATA_MODE1, 2048/0x00, FilePos 1474560 1474560 4689592320, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 656 | 656 | 0x00 656 | 2 | 0 | 0x41 | 0 | 0 | 0x00 656 | 2 | 1 | 0x41 | 64 | 720 | 0x00 720 | 3 | 0 | 0x41 | 0 | 0 | 0x00 720 | 3 | 1 | 0x41 | 2289120 | 2289840 | 0x00 2289840 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:14:58 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 16 run-out blocks from end of track 1. Length: 656 -> 640. 10:14:58 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 16 run-out blocks from end of track 2. Length: 64 -> 48. 10:14:58 AM #15 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:14:58 AM #16 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 10:14:58 AM #17 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22,160 KB/s) 10:14:58 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:14:58 AM #19 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode for Multisession 10:14:58 AM #20 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: No 10:14:58 AM #21 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:14:58 AM #22 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 10:15:37 AM #23 Text 0 File DVDMinusRW.cpp, Line 588 EndTrack 1: Last written address was 639 10:15:37 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #656): write at #656 10:15:37 AM #25 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode for Multisession 10:15:37 AM #26 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 656 DVD high compatibility mode: No 10:15:37 AM #27 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:15:43 AM #28 Text 0 File DVDMinusRW.cpp, Line 588 EndTrack 2: Last written address was 703 10:15:43 AM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #720): write at #720 10:15:43 AM #30 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode for Multisession 10:15:43 AM #31 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 720 DVD high compatibility mode: No 10:15:43 AM #32 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:21:22 AM #33 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 05 D6 50 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x09756bc0: Len x10000 0x00 00 01 BA 44 61 2D 75 75 F9 01 89 C3 F8 00 00 0x01 E0 07 EC 80 00 00 4C 64 D0 83 B7 9A 9B 75 D3 0x4E F6 AE 86 85 DD D2 6B 27 40 3A 73 5B 87 4B 17 10:21:22 AM #34 CDR -1135 File Writer.cpp, Line 303 Write error D: Memorex DVD+-RAM 530L v1 10:21:23 AM #35 SPTI -1169 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x08 CDB Data: 0x35 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 10:21:36 AM #36 Text 0 File DVDMinusRW.cpp, Line 588 EndTrack 3: Last written address was 382543 10:25:29 AM #37 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 16x (22,160 KB/s) 10:25:29 AM #38 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:26:00 AM #39 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:26:00 AM #40 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 10:26:00 AM #41 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:26:02 AM #42 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 10:26:02 AM #43 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
First off, I've never done a DVD copy on the fly nor do I use Nero 7. With that said, I've noticed 2 things in your log. 1.) You're not using the greatest media, Disc Manufacturer: CMC MA - G. AM3 I'd use Vebatim, Taiyo Yuden, Sony or Maxell for best results. and 2) You're burning too fast: Burn process failed at 16x (22,160 KB/s), especially with CMC media. If I'm reading your log right, you firmware is saying it shouldn't be burned faster than 6X (Revision number of maximum recording speed: 6.0). I'd probably try to burn this media @ 4X. Not much on your drive, Memorex DVD+-RAM 530L v1>Version: 5M64 , but it's possible it might be a rebadged Liteon. From what I could find out, you do have the lastest firmware.
