Hello dudes Today when I tried to burn a audio cd,suddenly the process failed and showed me the "end of disc-at-once faild" buffer underrun data stream failed error. I found tht my DMA is off in the nero log. I tried everything to turn the DMA on.from this thread http://forums.afterdawn.com/thread_view.cfm/252845 But the nero log still shows tht DMA is off. My DVD writer was in "IDE Channel" before i uninstall it.But after uninstalling and rebooting the name was changed "ATI Channel 1" Guys this is argent Please help me! will supply any requried info regards mshassy
I looked at the thread you referenced. You need to uninstall the IDE controller that the Optical drive is attached to, not the drive itself. Before you do so, make sure that your HDD and the optical drive aren't on the same controller. What OS are you running?
OK, then the process should be the same, except that instead of removing the Optical drive, remove the IDE channel that the optical drive is on. Reboot the system. DMA operation should be restored.
Dude I removed the MArvell Scsi RAID Controller and rebooted the system.Then a Standard Dual Channel PCI IDE Controller installed by the system.But still the DMA is off in my nero log please help!
And i found another thing.In the log my DVD writer was in the Scsi-Device Map.But now its in CDROM-Device Map.And there is no DMA for it!
What kind of burner are you using? IDE, SATA, or SCSI? If IDE, is it on the same cable as one of your HDD? If IDE, can you identify if it's on the primary or secondary IDE controller? Why did you remove the SCSI controller and not the IDE controller? If you go to Control Panel --> System and click on the Advanced settings tab for each of the IDE controllers what are the current transfer mode settings and do any of them say "PIO Mode"?
my dvd writer is on IDE and my HDD is on SATA. And i forgot to say i think that is very useful.I also have alcohol installed and there is a virtual CD rom there. Now the both writer and virtual CD roms are on ATP Channels here is a pic that clear everything for u anyway thank you very much for helping me I really appreciate it!
Windows Vista 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 9.4.26.100 Internal Version: 9, 4, 26, 100 (Nero Express) Recorder: <Image Recorder> Version: Not available - HA -1 TA 0 - 9.4.26.100 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <JR5044N QHX514A >Version: 2.0B - HA 1 TA 0 - 9.4.26.100 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : JR5044N QHX514A 2.0B vaxscsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === JR5044N QHX514A G: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095492kB) Free physical memory: 1017MB (1041640kB) Memory in use : 50 Uncached PFiles: 0x0 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2009 ISO compilation 11:37:45 AM #1 Text 0 File Isodoc.cpp, Line 6998 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:37:45 AM #2 ISO9660GEN -11 File Geniso.cpp, Line 3327 First writeable address = 0 (0x00000000) 11:37:45 AM #3 Text 0 File Burncd.cpp, Line 3572 Turn on Disc-At-Once, using DVD media 11:37:45 AM #4 Text 0 File DlgWaitCD.cpp, Line 313 Last possible write address on media: 4718591 Last address to be written: 12127 11:37:45 AM #5 Text 0 File DlgWaitCD.cpp, Line 325 Write in overburning mode: NO (enabled: CD) 11:37:45 AM #6 Text 0 File DlgWaitCD.cpp, Line 500 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:37:45 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 739 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 12128 (12128) = #12128/2:41.53 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12128 blocks [Image Recorder] -------------------------------------------------------------- 11:37:46 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 941 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24838144, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 12128 | 0 | 0x00 12128 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:37:46 AM #9 Text 0 File Burncd.cpp, Line 4279 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 11:37:46 AM #10 Phase 65 File dlgbrnst.cpp, Line 1767 Burn process started 11:37:46 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2695 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:37:46 AM #12 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 590400 11:37:47 AM #13 Text 0 File WriterStatus.cpp, Line 245 <Image Recorder> start writing Lead-Out at LBA 12128 (2F60h), length 0 blocks 11:37:47 AM #14 Phase 66 File dlgbrnst.cpp, Line 1767 Burn process completed successfully Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon ====== *** Nero Burning ROM, History File *** ====== Windows Vista 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 9.4.26.100 Internal Version: 9, 4, 26, 100 Recorder: <Image Recorder> Version: Not available - HA -1 TA 0 - 9.4.26.100 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <JR5044N QHX514A >Version: 2.0B - HA 1 TA 1 - 9.4.26.100 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : SONY DVD RW DRU-830A SS25 mv61xx Port 4 ID 0 DMA: Off ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 20 DMA: Off CdRomPeripheral : JR5044N QHX514A 2.0B vaxscsi Port 5 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-830A F: CdRom0 JR5044N QHX514A G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095492kB) Free physical memory: 1140MB (1167588kB) Memory in use : 44 Uncached PFiles: 0x0 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2009 ISO compilation 11:50:34 AM #1 Text 0 File Isodoc.cpp, Line 6998 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:50:34 AM #2 ISO9660GEN -11 File Geniso.cpp, Line 3327 First writeable address = 0 (0x00000000) 11:50:34 AM #3 Text 0 File Burncd.cpp, Line 3572 Turn on Disc-At-Once, using DVD media 11:50:34 AM #4 Text 0 File DlgWaitCD.cpp, Line 313 Last possible write address on media: 4718591 Last address to be written: 2292863 11:50:34 AM #5 Text 0 File DlgWaitCD.cpp, Line 325 Write in overburning mode: NO (enabled: CD) 11:50:34 AM #6 Text 0 File DlgWaitCD.cpp, Line 500 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:50:34 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 739 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2292864 (2292864) = #2292864/509:31.39 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292864 blocks [Image Recorder] -------------------------------------------------------------- 11:50:37 AM #8 Phase 40 File dlgbrnst.cpp, Line 1767 Aborted by user 11:50:37 AM #9 Text 0 File Burncd.cpp, Line 2386 User aborted on choose image file-name Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon ====== *** Nero Burning ROM, History File *** ====== Windows Vista 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 9.4.26.100 Internal Version: 9, 4, 26, 100 Recorder: <SONY DVD RW DRU-830A> Version: SS25 - HA 1 TA 0 - 9.4.26.100 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data CD-ROM: <JR5044N QHX514A >Version: 2.0B - HA 1 TA 1 - 9.4.26.100 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : SONY DVD RW DRU-830A SS25 mv61xx Port 4 ID 0 DMA: Off ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 20 DMA: Off CdRomPeripheral : JR5044N QHX514A 2.0B vaxscsi Port 5 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-830A F: CdRom0 JR5044N QHX514A G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095492kB) Free physical memory: 996MB (1020772kB) Memory in use : 51 Uncached PFiles: 0x0 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2009 ISO compilation 11:50:51 AM #1 Text 0 File SCSIPTICommands.cpp, Line 430 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:50:51 AM #2 Text 0 File Isodoc.cpp, Line 6998 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:50:51 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3327 First writeable address = 0 (0x00000000) 11:50:51 AM #4 Text 0 File Burncd.cpp, Line 3572 Turn on Disc-At-Once, using DVD media 11:50:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 313 Last possible write address on media: 2298495 Last address to be written: 2292863 11:50:51 AM #6 Text 0 File DlgWaitCD.cpp, Line 325 Write in overburning mode: NO (enabled: CD) 11:50:51 AM #7 Text 0 File DlgWaitCD.cpp, Line 2843 Recorder: SONY DVD RW DRU-830A, Media type: DVD-R Disc Manufacturer ID: <CMC MA> <G. AM3> Disc Application Code: 64, Disc Physical Code: 193 11:50:51 AM #8 Text 0 File DlgWaitCD.cpp, Line 500 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:50:51 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 739 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2292864 (2292864) = #2292864/509:31.39 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292864 blocks [F: SONY DVD RW DRU-830A] -------------------------------------------------------------- 11:50:51 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 941 Prepare [F: SONY DVD RW DRU-830A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4695785472, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2292864 | 0 | 0x00 2292864 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:50:51 AM #11 Text 0 File SCSIPTICommands.cpp, Line 217 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 11:50:51 AM #12 Text 0 File Burncd.cpp, Line 4279 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 11:50:51 AM #13 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 11:50:51 AM #14 Text 0 File Burncd.cpp, Line 4401 Cache writing successful. 11:50:51 AM #15 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 11:50:51 AM #16 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 8x (11,080 KB/s) 11:50:51 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:50:51 AM #18 Text 0 File DVDR.cpp, Line 3284 Recording mode: Sequential Recording Mode 11:50:51 AM #19 Text 0 File DVDR.cpp, Line 3438 Start write address at LBA 0 DVD high compatibility mode: Yes 11:50:51 AM #20 Text 0 File Cdrdrv.cpp, Line 10282 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) Outer Limit of Data Recordable Area: 0 h Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0, Extended part version: 33 Start PSN of the Extra Border Zone: 0 h Start PSN of Physical format information blocks in Extra Border Zone: 0 h Media Specific [16..783]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 11:50:51 AM #21 Text 0 File DVDR.cpp, Line 3576 Reserved Track size: 2292864 (22FC80h, 4478MB) -> return code 0 11:50:51 AM #22 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 11:55:36 AM #23 SPTI -500 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x00) WinError(31) NeroError(-500) CDB Data: 0x2A 00 00 00 00 80 00 00 20 00 00 00 Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x190f0140: Len x10000 0x68 85 29 0C 91 10 D9 00 89 60 CF 44 55 55 89 F9 0x10 74 55 70 8A 6F 9C 42 69 26 04 CF 70 E9 1D 06 0x45 44 AA 80 00 28 64 06 CC C2 D5 05 06 6D 52 A1 11:55:40 AM #24 SPTI -1033 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) CDB Data: 0x2A 00 00 00 00 80 00 00 20 00 00 00 Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 Sense Area: 0x08 00 02 00 00 00 00 0A 00 00 00 00 04 01 Buffer x08d76e80: Len x10000 0x68 85 29 0C 91 10 D9 00 89 60 CF 44 55 55 89 F9 0x10 74 55 70 8A 6F 9C 42 69 26 04 CF 70 E9 1D 06 0x45 44 AA 80 00 28 64 06 CC C2 D5 05 06 6D 52 A1 11:55:40 AM #25 CDR -1033 File Writer.cpp, Line 306 Drive not ready F: SONY DVD RW DRU-830A 11:55:51 AM #26 Text 0 File DVDR.cpp, Line 3843 EndDAO: Last written address was 127 (7Fh) 11:55:51 AM #27 CDR -1033 File WriterStatus.cpp, Line 292 Drive not ready F: SONY DVD RW DRU-830A 11:55:51 AM #28 TRANSFER -24 File WriterStatus.cpp, Line 292 Could not perform end of Disc-at-once 11:55:51 AM #29 Text 0 File DVDPlusDualLayer.cpp, Line 1452 SetDriveCaps: Set LAST LBA of layer 1 to 0 11:55:51 AM #30 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 8x (11,080 KB/s) 11:55:51 AM #31 Text 0 File SCSIPTICommands.cpp, Line 267 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:55:54 AM #32 Text 0 File Cdrdrv.cpp, Line 11592 DriveLocker: UnLockVolume completed 11:55:54 AM #33 Text 0 File SCSIPTICommands.cpp, Line 430 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon ====== *** Nero Burning ROM, History File *** ====== Windows Vista 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 9.4.26.100 Internal Version: 9, 4, 26, 100 Recorder: <SONY DVD RW DRU-830A> Version: SS25 - HA 1 TA 0 - 9.4.26.100 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data CD-ROM: <JR5044N QHX514A >Version: 2.0B - HA 1 TA 1 - 9.4.26.100 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : SONY DVD RW DRU-830A SS25 mv61xx Port 4 ID 0 DMA: Off ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 4 ID 20 DMA: Off CdRomPeripheral : JR5044N QHX514A 2.0B vaxscsi Port 5 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-830A F: CdRom0 JR5044N QHX514A G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095492kB) Free physical memory: 845MB (865872kB) Memory in use : 58 Uncached PFiles: 0x0 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2009 ISO compilation 2:56:45 PM #1 Text 0 File SCSIPTICommands.cpp, Line 430 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 2:56:45 PM #2 Text 0 File Isodoc.cpp, Line 6998 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:56:45 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3327 First writeable address = 0 (0x00000000) 2:56:45 PM #4 Text 0 File Burncd.cpp, Line 3572 Turn on Disc-At-Once, using DVD media 2:56:46 PM #5 Text 0 File DlgWaitCD.cpp, Line 313 Last possible write address on media: 2295103 Last address to be written: 2262735 2:56:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 325 Write in overburning mode: NO (enabled: CD) 2:56:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 2843 Recorder: SONY DVD RW DRU-830A, Media type: DVD+RW Disc Manufacturer ID: <RITEK>, Media Type ID: <004>, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 1 2:56:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 500 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:56:46 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 739 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2262736 (2262736) = #2262736/502:49.61 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2262736 blocks [F: SONY DVD RW DRU-830A] -------------------------------------------------------------- 2:56:46 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 941 Prepare [F: SONY DVD RW DRU-830A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4634083328, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2262736 | 0 | 0x00 2262736 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 2:56:46 PM #11 Text 0 File SCSIPTICommands.cpp, Line 217 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 2:56:46 PM #12 Text 0 File Burncd.cpp, Line 4279 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 2:56:46 PM #13 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 2:56:46 PM #14 Text 0 File Burncd.cpp, Line 4401 Cache writing successful. 2:56:46 PM #15 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 2:56:46 PM #16 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 4x (5,540 KB/s) 2:56:46 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:56:46 PM #18 Text 0 File Cdrdrv.cpp, Line 10282 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h Data in Burst Cutting Area (BCA) does not exist Twin Format Flag: 0 Media Specific [16..783]: 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 0 2:56:46 PM #19 Text 0 File Cdrdrv.cpp, Line 10282 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h Data in Burst Cutting Area (BCA) does not exist Twin Format Flag: 0 Media Specific [16..783]: 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 0 2:56:46 PM #20 Text 0 File Cdrdrv.cpp, Line 10282 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h Data in Burst Cutting Area (BCA) does not exist Twin Format Flag: 0 Media Specific [16..783]: 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 0 2:56:46 PM #21 Text 0 File DVDR.cpp, Line 7750 Drive: SONY DVD RW DRU-830A Book Type request [TSST]: DVD-ROM 2:56:46 PM #22 Text 0 File DVDPlusRW.cpp, Line 637 Start write address at LBA 0 DVD high compatibility mode: Yes 2:56:46 PM #23 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 3:11:09 PM #24 Text 0 File WriterStatus.cpp, Line 245 <F: SONY DVD RW DRU-830A> start writing Lead-Out at LBA 2262736 (2286D0h), length 0 blocks 3:11:10 PM #25 Text 0 File DVDPlusRW.cpp, Line 904 EndDAO: Last written address 2262736 3:11:10 PM #26 Text 0 File Cdrdrv.cpp, Line 10282 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h Data in Burst Cutting Area (BCA) does not exist Twin Format Flag: 0 Media Specific [16..783]: 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 0 3:11:10 PM #27 Text 0 File DVDR.cpp, Line 7750 Drive: SONY DVD RW DRU-830A Book Type request [TSST]: DVD-ROM 3:11:10 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 1452 SetDriveCaps: Set LAST LBA of layer 1 to 0 3:11:10 PM #29 Phase 37 File dlgbrnst.cpp, Line 1767 Burn process completed successfully at 4x (5,540 KB/s) 3:11:11 PM #30 Text 0 File SCSIPTICommands.cpp, Line 267 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:11:14 PM #31 Text 0 File Cdrdrv.cpp, Line 11592 DriveLocker: UnLockVolume completed 3:11:14 PM #32 Text 0 File SCSIPTICommands.cpp, Line 430 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon ====== *** Nero Burning ROM, History File *** ======
