When I try to burn to a cd I get a fixation error, below is the nero log info on the error; Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'Crogram FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.2 (Nero Express) Recorder: <YAMAHA CRW-F1E> Version: 1.0d - HA 1 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <YAMAHA CRW-F1E >Version: 1.0d - HA 1 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : YAMAHA CRW-F1E atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On DiskPeripheral : fasttx2k Port 2 ID 0 DMA: Off === CDRom-Device-Map === YAMAHA CRW-F1E E: CDRom0 _NEC DVD_RW ND-1300A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 177MB (181272kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.8.2004 CD-ROM (ISO) 5:10:33 PM #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:10:33 PM #2 Phase 90 File dlgbrnst.cpp, Line 1800 Buffer Underrun Protection activated 5:10:33 PM #3 Text 0 File Reader.cpp, Line 118 Reader running 5:10:33 PM #4 Text 0 File Writer.cpp, Line 124 Writer YAMAHA CRW-F1E running 5:10:33 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 5:10:33 PM #6 Text 0 File Burncd.cpp, Line 3101 Turn on Track-at-once, using CD-R/RW media 5:10:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 359847 ( 79:59.72) Last address to be written: 196697 ( 43:44.47) 5:10:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 5:10:35 PM #9 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: YAMAHA CRW-F1E; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 5:10:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:10:35 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 53825 (53825) = #53825/11:57.50 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 53823 blocks [YAMAHA CRW-F1E ] -------------------------------------------------------------- 5:10:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [YAMAHA CRW-F1E ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 3 to 3: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 110540800, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 142723 | lead-in | 0 | 0x00 | 0x41 142723 | 3 | 0 | 0x00 | 0x41 142873 | 3 | 1 | 0x00 | 0x41 196698 | lead-out | 1 | 0x00 | 0x41 5:10:35 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 994 Removed 2 run-out blocks from end of track 3. Length: 53825 -> 53823. 5:10:35 PM #14 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 5:10:35 PM #15 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 5:10:35 PM #16 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 5:10:35 PM #17 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 16x (2,400 KB/s) 5:10:35 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #142873 5:10:35 PM #19 Text 0 File Mmc.cpp, Line 19451 Set BUFE: supported -> ON , Optimum Writespeed Control : ON 5:11:03 PM #20 SCSI -1106 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05E00000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x02 0x2E 0x19 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 5:11:03 PM #21 CDR -1106 File Writer.cpp, Line 301 Power calibration error 5:11:03 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:11:03 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 5:11:03 PM #24 CDR -201 File WriterStatus.cpp, Line 196 Invalid write state YAMAHA CRW-F1EH1 T0 5:11:03 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 196 Could not perform EndTrack 5:11:03 PM #26 Text 0 File Mmc.cpp, Line 14287 <YAMAHA CRW-F1E > start Close Session 5:11:03 PM #27 SCSI -1026 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x2C 0x04 5:11:03 PM #28 CDR -1026 File WriterStatus.cpp, Line 245 Current program area empty 5:11:03 PM #29 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 5:11:03 PM #30 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 5:11:03 PM #31 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 5:11:03 PM #32 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'DriversCDRALW2K.SYS': Ver=7.0.1.41 , size=24576 bytes, created 4/13/2004 2:30:12 PM File 'Driversatapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
You have an older version of Nero 6, so you should upgrade to the latest from our webiste and see if you still get the 'Power Calibration' error message. I notice the log file shows that you are 'Continueing a Multisession' write. Does this mean the first write was succesful? Or are you adding to a CD that was written to by another recorder, or one that you wrote too a few weeks or months ago? The 'Power Calibration' error can be caused by a number of possible variables. For Example: 1) Poor Media 2) Old firmware (not an issue for you) 3) Old software ( You do need to upgrade Nero) 4) Poor Power to the recorder 5) Driver Conflicts ( don't see any obvious ones listed in your log file) 6) Old drivers for your IDE Controller 7) A recorder in need of service (Optical head out of alignment) etc.... Regards, Craig
I do have the newest version installed, and I believe this is when zI started having problems, it only accurs after I use nero to do a multi session burn, the first burn does ok, but when I try to add more stuff later I get this fixation error.
The log file you provided indicates you have Nero 6.3.0.2, and the version we currently have posted on our website is Nero 6.3.1.17 So either you provided us with the wrong Nero log file, or you do not have the latest version of Nero available. Regards, Craig
sorry, I do have the newest version, the log file is when I uninstalled nero and put the old copy on, and tried nero, it still gave me the fixation error, so I upgraded to the 6.17 version and still get these error. I used nero clean tool to try to get everything out of my system before reinstalling, but nothing is working.
Please provide a copy of the new Nero Log file so we can see if it provides us with more information. Regards, Craig
well i just tried nero and it worked fine this time, I sure don't know what the problem was, if I get another error message with the new nero i will post, thanks
Latest Firmware for your Yamaha burner is 1.0g dated May 23,2003. Try -->: http://www.yamaha.co.jp/english/product/computer/index.html and click the Download button --> then firmware. Although Craig is the expert on this and mentions in 2) Old firmware (not an issue for you) -- I have heard of some Yamaha burner acting up with newer burning software package. Good Luck !
