Nero Power Callibration Error?

Can anyone make any sense out of this log?

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-167T >Version: 9S1B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST360015A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVD SOHD-167T D: CDRom0
LITE-ON DVDRW SOHW-1633S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (784880kB)
Free physical memory: 467MB (478556kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.10.2005
Burn DVD Image
4:02:49 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

4:02:49 PM #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running

4:02:49 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:02:50 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2201995 (489:19.70, 4300MB)

4:02:50 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

4:02:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

4:02:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:02:50 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2201996 (2201996) = #2201996/489:19.71
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201996 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

4:02:50 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509687808, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2201996 | lead-out | 1 | 0x41 | 0x00

4:02:50 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:02:50 PM #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

4:02:50 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:02:50 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

4:02:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:02:50 PM #15 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

4:02:50 PM #16 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

4:02:50 PM #17 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

4:02:50 PM #18 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:03:48 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03CD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

4:03:48 PM #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

4:03:48 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:03:48 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:03:49 PM #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

4:03:49 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 9/3/2002 11:26:59 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 1/26/2004 10:52:45 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 9/3/2002 11:27:33 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : (Security Option)

I've been having problems getting my burner to read discs. I tried to burn a DVD earlier using TY media, so this is clearly not a media issue. It seems like my drive is screwed up. I haven't even had this drive a year yet. I thought Lite-On's were supposed to be dependable?

 

This usually happens if you are copying discs where the original was burnt at a different speed. Try burning at a lower speed. Sometimes the discs themselves are to blame so also try a different brand.