Iám tryig to burn some iso´s, I had this problem a while ago that said "Illigal disc" and got rid of it after I updated my firmware, but now Iám having the same problem even though I´ve got the the newest FM.. what I know. Using TDK btw Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 17:35:34 Nero Version: 6.6.0.8 (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.19 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVD-16X DVD-ROM BDV316C >Version: .20R - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVD-16X DVD-ROM BDV316C atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === DVD-16X DVD-ROM BDV316C E: CDRom0 _NEC DVD_RW ND-2510A F: CDRom1 Generic DVD-ROM G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785900kB) Free physical memory: 422MB (432496kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.9.2008 Burn DVD Image 18:40:36 #1 Text 0 File Reader.cpp, Line 127 Reader running 18:40:36 #2 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 18:40:36 #3 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2295061 (510:00.61, 4482MB) 18:40:36 #4 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 18:40:36 #5 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: MBI 01 - RG40 Disc Application Code: 64, Disc Physical Code: 193 18:40:36 #6 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:40:36 #7 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1) 2 indices, index0 (150) not provided original disc pos #0 + 2295062 (2295062) = #2295062/510:0.62 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295062 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 18:40:36 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700286976, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2295062 | lead-out | 1 | 0x41 | 0x00 18:40:36 #9 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 18:40:36 #10 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 18:40:36 #11 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 18:40:36 #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2 770 KB/s) 18:40:36 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:40:36 #14 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 18:40:36 #15 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 18:40:36 #16 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 18:40:36 #17 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 18:40:36 #18 SCSI -1046 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x05 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 18:40:36 #19 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 18:40:36 #20 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 18:40:36 #21 Text 0 File DVDR.cpp, Line 5937 Book Type counter: 500, Book Type selected in EEPROM, command version 2 18:40:36 #22 Text 0 File DVDR.cpp, Line 5061 Drive: _NEC DVD_RW ND-2510A Book Type request [NEC]: DVD-ROM Book Type setting not supported for the loaded disc type Changing the Book Type was finished with error, return code -4 18:40:36 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765 Illegal disc 18:40:36 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765 Could not perform start of Disc-at-once 18:40:36 #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2 770 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2005-06-14 16:30:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Get some decent media. Book Type request [NEC]: DVD-ROM Book Type setting not supported for the loaded disc type Changing the Book Type was finished with error, return code -4 You can't change the booktype on a DVD-R.
I used the exakt same media from the exakt same package a week ago an everything witout any problems, havnt updated any FW or used any other media since, how can it be the media?
Try some decent media first and don't try to change the booktype on a DVD-R disc. Just because some discs worked doesn't mean that they all will work.
@Demalro........ I'm sorry to inform you that you are using crappy media! your TDK is made in India (MBI- Moser Baer - made in India crap!). the best media is made in Japan like Taiyo Yuden and some Verbatim and Sony! Verbatim made in Singapore/Taiwan are top notch, too! but you are using media made in India and they don't have the standards of quality control as the above mentioned media! So if you bought a spindle of these TDKs then you really can't rely on their quality for every burn! Starting off with good quality media is important as you are finding out...... here are some other observations of your log: Update your Nero 6 to version 6.6.1.15a the best Nero 6 version. Here's how: Before udating to 6.6.1.15a save the serial #, uninstall Nero, then use the cleaning tools : http://www.nero.com/eng/support-nero6-tools-utilities.html then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot! update to Nero 6.6.1.15a, install Package 1 and Package 2 only: http://www.nero.com/eng/downloads-nero6-update.php reboot and you're good to go! you're burning too close to the edge of those crappy media that you're using... another reason why you shouldn't use TDK! and Illegal disc soooooo those TDKs you're using... now Nero doesn't like them... change your media to better media..... buy some Verbatim.... they are found readily in the stores.... better yet buy some Taiyo Yuden found in the online stores, like here: http://supermediastore.com/taiyo-yuden-silver-thermal-8x-dvd-r-media.html FOR DVD-Rs OR THESE: http://supermediastore.com/taiyo-yuden-dvd-plus-r-media.html FOR DVD+Rs SO YOU CAN BOOKTYPE TO DVD-ROM! buy 8x media... not the 16x .... it's more compatible with older burners! and you can burn at 8x with these babies! I use the White Inkjet Hub printables or the Silver Inkjet Printables..... 100% success rate! no burning errors here unless it's the program that is at fault NOT THE DISK!
