Hi, I just recently replaced my drives as the old ones were starting to fail and have been having problems with nero recode, I get about 50% into copying a none copywrited disc when I get the message failed to read %. This happens on a number of discs sometimes a disc will copy but sometimes I get the message. I have included a log and any help would be appreciated ********** Nero Recode 2 SE ********** Version: 2.2.6.17 Project type: Copy entire DVD Target size: DVD5 (2282925) 23:18:26 File LangStreamPatcher.cpp, Line 56 Command table patching started... 23:18:26 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: PIONEER DVD-RW DVR-115D Number of copies: 1 Write speed: 8310 KB/s Temp folder: C:\Documents and Settings/My Documents\Nero Recode (205187100672 bytes free) Direct burning: true Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 23:18:29 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [6587 vobus] 1802.60MB -> 1802.60MB [R 1.00] Video: 1694.81MB, extra: 107.79MB Audio: 1 streams 0. 0. MPEG-1 2-ch Unspecified 94.92MB [enabled] Subpicture: 0 streams VTS_02 Title Vobs [6341 vobus] 1724.17MB -> 1724.17MB [R 1.00] Video: 1620.23MB, extra: 103.94MB Audio: 1 streams 0. 0. MPEG-1 2-ch Unspecified 91.55MB [enabled] Subpicture: 0 streams 23:18:31 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 23:18:35 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD+R 23:18:35 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2283090 sectors (2295104) 23:18:35 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2283090 sectors (1805803 required) 23:18:35 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4459.16MB (3526.96MB obtained) 23:18:35 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 23:19:08 File vob_record.cpp, Line 643 DirectBurn offset: VTS_01_1.VOB 96 23:22:46 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 1802.60MB -> Expected 1802.60MB -> Output 1802.58MB Finished error -0.02MB Ratio encoded = 1 Original encoded = 6586 Slide encoded = 0 StillImage encoded = 0 Output extra size = 107.59MB Source video size = 1695.02MB Pictures Modified [I 0] [P 0] [B 0] 23:23:02 File dvd_record.cpp, Line 420 DirectBurn offset: VTS_01_0.IFO 48 ----- Begin NeroAPI error log ----- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero API version: 6.6.0.18 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 18e Recorder: <PIONEER DVD-RW DVR-115D>Version: 1.13 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 2 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : WDC WD2500JD-00HBB0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-115D atapi Port 2 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-115D atapi Port 2 ID 1 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-115D D: CDRom0 PIONEER DVD-RW DVR-115D E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 447MB (457968kB) Free physical memory: 180MB (184868kB) Memory in use : 59 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.1.2008 NeroAPI 23:18:35 #1 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: -1 ( 0:00.-1, 0MB) 23:18:35 #2 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 23:18:35 #3 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-115D, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 23:18:35 #4 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:18:35 #5 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 23:18:35 #6 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 23:18:35 #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1005 Estimated filesystem size: 544 23:18:35 #8 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 6x (8,310 KB/s) 23:19:07 #9 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 0. Length: 592 23:19:07 #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1869 Reserved start fragment at 0 23:19:08 #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 592. Length: 48 23:19:08 #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_1.VOB at sector 640 23:21:24 #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 23:21:24 #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2241 Added extra file VTS_01_2.VOB 23:21:24 #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_2.VOB at sector 524927 23:23:02 #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_2.VOB of size 816406528 bytes (398636 sectors) 23:23:02 #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_0.BUP at sector 923563 23:23:02 #18 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_0.BUP of size 45056 bytes (22 sectors) 23:23:04 #19 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_0.IFO at sector 592 23:23:07 #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2609 Successfully released fragment at 592 23:23:07 #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2629 Finished writing file VTS_01_0.IFO of size 45056 bytes (22 sectors) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 15/08/2007 22:33:12 File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 15/08/2007 22:33:10 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ----- End NeroAPI error log ----- 23:23:45 File burn_dvdfiles.cpp, Line 381 Failed to read from the file ^. 23:23:45 File burn_dvdfiles.cpp, Line 382 Compiling DVD volume failed 23:23:45 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit 23:23:45 File burner.cpp, Line 961 Failed to read from the file 8ˆ±Š.
I would suggest you use a ripper(DVD Decrypter for example) to copy the disc to Hard Drive first and then do the burn. If your burners are on the same cable is hard to do the Burn-At-Once. If your discs were originally burned on poor quality media, or too fast, too close to the edge of the disc, they might be difficult to rip, that's why Nero errors when reading.
Hi, thank you for getting back to me. I'm not sure but I dont think its the dirty disc thing, as sometimes the disc will copy and sometimes it wont. Also I only usually burn at 6x or 4x and not always to the edge. It tends to happen on discs where the film or whatever, was in two parts so about the 50% mark. On a good burn when it gets to the 50% mark or the split in the film the drives usually go quiet for a couple of seconds and then gets going again, but when the error occurs it stays quiet for about a minute and then I get the error.I tried to make a copy from a copy of the bad disc, it made 1 copy fine, but when I tried to copy again I got the error.If you could give me more info on the cable I would be very grateful. I have always used just one cable, on my old drives and the new, and I dont think I would know where to plug a second cable in? Thank you again
Sara82, Next time you post an error log you need to remove the serial number it lists. If you don't other folks will use it
To plug in a second cable, you would look on your motherboard for another IDE channel, so you would plug in the second cable into a buss that looks like the one that you already have the first cable plugged into . You should also swap the cable for an 80 wire one( unless you already have one). Reduce the burn speed to X4 so your reader can keep up. Un-check burn-at-once and let Nero cache the info on the hard disk first.
Thank you for getting back to me, I think you could have been right about the problem being burning to close to the edge on certain media. I never had a problem before, but I suppose maybe the new drives are more picky. I dont have a problem as such but when I was trying to sort out the issues I was having I installed nerovision 3.1.0.21 which I think included recode. I really liked the way recode worked in this version because it started burning straight away rather than taking ages for the discs to spin up, the problem with this though was that I found sometimes nerovision wouldn't start when I wanted it to, I couldn't even close it in taskmanager and had to reboot to get it going. So I then installed nero 6.6.1.4 and now opening nerovision is reliable but I get the slow spin up. I was just wondering is there a way around it. Thank you for your time
