I am having problems burning with nero. The log file below shows me that I am running Windows 2000 which is not true. I have a AMD Athlon 64 3200+ 2200MHz with XP professional + SP2 on it. I built this machine 3 years ago. I have a DVD-+RW Recorder with Firmware Version T7S4 (latest!). Before I flashed my old firmware, I burned all types of DVD even the cheap ones with no problem. After I installed the new firmware Now when I try to burn (iso or anything) I get this error: Session fixation error; Could not perform end of Disc-at-once; Burn process failed at 4x Can not write to disk incompatable format Before I post the log file let me just tell you that I have done just about every, except to throw in the bin. I have Install and reinstalled Nero. I googled everywhere. I tried many suggestions that are posted on this site...result NOTHING. NADA! I even reinstalled windows xp hoping that the drives would fixed with a new install. I 99.9% sure that its the Firmware. Not its not the DVDs. I burned them right before I flashed the firmware. PLEASE HELP!!! Can any one help? LOG FILE BELOW Code: -------------------------------------------------------------------------------- Windows 2000 5.0 (but i am running XP professional + SP2!) IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/9/2007 1:40:44 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TDK DVDRW1280B> Version: T7S4 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: CD-ROM: <TDK DVDRW1280B >Version: T7S4 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 4 ID 31 DMA: Off CdRomPeripheral : TDK DVDRW1280B atapi Port 3 ID 0 DMA: On DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On === CDRom-Device-Map === TDK DVDRW1280B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523568kB) Free physical memory: 207MB (212144kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.9.2007 ISO compilation 8:21:26 PM #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:21:26 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 8:21:26 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 8:21:26 PM #4 Text 0 File Writer.cpp, Line 113 Writer E: TDK DVDRW1280B running 8:21:26 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 8:21:26 PM #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 8:21:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 607 ( 0:08.07, 1MB) 8:21:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 8:21:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TDK DVDRW1280B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 8:21:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:21:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 608 (608) = #608/0:8.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [E: TDK DVDRW1280B] -------------------------------------------------------------- 8:21:26 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: TDK DVDRW1280B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 608 | lead-out | 1 | 0x41 | 0x00 8:21:26 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:21:26 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 8:21:26 PM #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 8:21:26 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 8:21:26 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 4x (5,540 KB/s) 8:21:26 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:21:26 PM #19 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode for Multisession 8:21:26 PM #20 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 8:21:26 PM #21 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 8:21:26 PM #22 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:21:26 PM #23 SPTI -1046 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x04080000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [b] 8:21:26 PM #24 CDR -1046 File Writer.cpp, Line 302 Illegal disc E: TDK DVDRW1280B 8:21:26 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:21:27 PM #26 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was -1 8:21:27 PM #27 Phase 133 File dlgbrnst.cpp, Line 1724 Writing short lead-out [color=red] 8:21:27 PM #28 SPTI -1176 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 8:21:27 PM #29 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error E: TDK DVDRW1280B 8:21:27 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 8:21:27 PM #31 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 4x (5,540 KB/s) [/color][/b] Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 7/26/2007 4:06:18 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/9/2007 1:40:44 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 7/26/2007 4:06:18 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 0, size=101504 bytes, created 8/30/2005 5:24:38 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 0, size=29312 bytes, created 8/30/2005 5:24:18 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 0, size=8704 bytes, created 8/30/2005 5:24:40 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) --------------------------------------------------------------------------------
I dont know why it shows as 2000 but I just answered your problem here http://forums.afterdawn.com/thread_view.cfm/561900
