I had this problem on both Nero 6 and now I installed Nero 9. I also get an illegal track, when I try burn DVD's as well :/ Is my DVD-RW busted? I tried running on my older computer where I have another DVD-RW, but on that one, Nero is not recognizing my drive.
I tried burning using 3 different discs, and I get the following error: Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 9.4.26.100 Internal Version: 9, 4, 26, 100 Recorder: <PIONEER DVD-RW DVR-212D>Version: 1.28 - HA 1 TA 0 - 9.4.26.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2000kB Bus Type : via Inquiry data CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 9.4.26.100 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-212D iaStor Port 0 ID 0 DMA: On DiskPeripheral : WDC WD6401AALS-00L3B2 iaStor Port 0 ID 1 DMA: Off DiskPeripheral : ST3500630AS iaStor Port 0 ID 2 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-212D F: CdRom0 Generic DVD-ROM G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095528kB) Free physical memory: 1333MB (1365292kB) Memory in use : 34 % Uncached PFiles: 0x0 Global Bus Type: default (0) Check supported media : Disabled (0) 4.11.2009 CD-ROM (ISO) 20:29:34 #1 Text 0 File SCSIPTICommands.cpp, Line 430 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 20:29:35 #2 Text 0 File Isodoc.cpp, Line 6998 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 20:29:35 #3 Text 0 File Burncd.cpp, Line 3242 PIONEER DVD-RW DVR-212D Buffer underrun protection activated 20:29:35 #4 ISO9660GEN -11 File Geniso.cpp, Line 3327 First writeable address = 0 (0x00000000) 20:29:35 #5 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 0. Length: 182617 -> 182615. 20:29:35 #6 Text 0 File Burncd.cpp, Line 3572 Turn on Track-At-Once, using CD-R/RW media 20:29:35 #7 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 1. Length: 182617 -> 182615. 20:29:35 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 1. Length: 182617 -> 182615. 20:29:35 #9 Text 0 File DlgWaitCD.cpp, Line 294 Medium type in the drive: Unknown Lowest/Highest CLV write speed: 3x/1285104x Recorder min/max supported write speed: 4x/9685372x 20:29:35 #10 Text 0 File DlgWaitCD.cpp, Line 313 Last possible write address on media: 359846 Last address to be written: 182616 20:29:35 #11 Text 0 File DlgWaitCD.cpp, Line 325 Write in overburning mode: NO (enabled: CD) 20:29:35 #12 Text 0 File DlgWaitCD.cpp, Line 2843 Recorder: PIONEER DVD-RW DVR-212D; CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 24 1A BC, 2: 26 B2 26, 3: FF FF FF (invalid) 20:29:35 #13 Text 0 File DlgWaitCD.cpp, Line 500 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:29:35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 739 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 182617 (182617) = #182617/40:34.67 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 182615 blocks [F: PIONEER DVD-RW DVR-212D] -------------------------------------------------------------- 20:29:35 #15 Text 0 File ThreadedTransferInterface.cpp, Line 941 Prepare [F: PIONEER DVD-RW DVR-212D] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 374306816, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 182617 | 0 | 0x00 182617 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 20:29:35 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1012 Removed 2 run-out blocks from end of track 1. Length: 182617 -> 182615. 20:29:35 #17 Text 0 File SCSIPTICommands.cpp, Line 217 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 20:29:35 #18 Text 0 File Burncd.cpp, Line 4279 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 20:29:35 #19 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 20:29:35 #20 Text 0 File Burncd.cpp, Line 4401 Cache writing successful. 20:29:35 #21 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 20:29:35 #22 Phase 32 File dlgbrnst.cpp, Line 1767 Simulation started at 10x (1.500 KB/s) 20:29:35 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2695 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 20:29:35 #24 Text 0 File MMC.cpp, Line 21767 Set BUFE: Buffer underrun protection -> ON 20:29:35 #25 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 83836800 20:30:11 #26 SPTI -1047 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047) CDB Data: 0x2A 00 00 00 1D 40 00 00 20 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 1D 40 0E 00 00 00 00 64 Buffer x0a313ac0: Len x10000 0x53 63 65 CF 55 20 8C 80 4A 72 94 41 FA 91 57 0A 0xDE 2A 22 16 60 B3 51 0A 8A C4 E8 68 0F 86 6C DA 0xB6 CE 29 1E 69 E7 FF 64 CD AD 38 29 EE 72 09 07 20:30:11 #27 CDR -1047 File Writer.cpp, Line 306 Illegal mode for this track F: PIONEER DVD-RW DVR-212D 20:30:25 #28 CDR -201 File WriterStatus.cpp, Line 282 Invalid write state F: PIONEER DVD-RW DVR-212D 20:30:25 #29 TRANSFER -18 File WriterStatus.cpp, Line 282 Could not perform EndTrack 20:30:32 #30 Text 0 File DVDPlusDualLayer.cpp, Line 1452 SetDriveCaps: Set LAST LBA of layer 1 to 0 20:30:32 #31 Phase 34 File dlgbrnst.cpp, Line 1767 Simulation failed at 10x (1.500 KB/s) 20:30:32 #32 Text 0 File SCSIPTICommands.cpp, Line 267 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 20:30:36 #33 Text 0 File Cdrdrv.cpp, Line 11592 DriveLocker: UnLockVolume completed 20:30:36 #34 Text 0 File SCSIPTICommands.cpp, Line 430 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
