the dvd/cdr burner I am using burns cdrs just fine. And it use to burn dvd's with no problem. But now when I go to burn dvds i get the following: David Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0B - HA 1 TA 4 - 7.8.5.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <ME3114C AES560H >Version: 1.0 - HA 1 TA 2 - 7.8.5.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 1 ID 0 DMA: On CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On CdRomPeripheral : ME3114C AES560H 1.0 amttzamk Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1H E: CDRom4 CyberDrv CW088D CD-R/RW F: CDRom1 ME3114C AES560H G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 625MB (640460kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.10.2007 Burn DVD Image 7:56:07 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 7:56:08 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4488921088 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <D:\johnny.nrg> 7:56:08 PM #3 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 7:56:08 PM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2191855 (487:04.55, 4280MB) 7:56:08 PM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 7:56:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 7:56:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:56:08 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2191856 (2191856) = #2191856/487:4.56 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2191856 blocks [E: LITE-ON DVDRW LH-20A1H] -------------------------------------------------------------- 7:56:08 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4488921088, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2191856 | 0 | 0x00 2191856 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 7:56:08 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 7:56:08 PM #11 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 7:56:08 PM #12 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 7:56:08 PM #13 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 7:56:08 PM #14 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 7:56:08 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22,160 KB/s) 7:56:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:56:09 PM #17 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 7:56:09 PM #18 Text 0 File DVDR.cpp, Line 6977 Drive: LITE-ON DVDRW LH-20A1H Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0 7:56:09 PM #19 CDR -1207 File DVDR.cpp, Line 6356 Book Type automatically set to: DVD-ROM 7:56:09 PM #20 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 7:56:09 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 7:57:10 PM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x00000000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7:57:10 PM #23 CDR -1106 File Writer.cpp, Line 303 Power calibration error E: LITE-ON DVDRW LH-20A1H 7:57:11 PM #24 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 7:57:11 PM #25 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 0 7:57:11 PM #26 Phase 129 File dlgbrnst.cpp, Line 1762 Generating DVD borders completed successfully 7:57:13 PM #27 Text 0 File DVDR.cpp, Line 6977 Drive: LITE-ON DVDRW LH-20A1H Book Type request [LO], rev 3: DVD+R Changing the Book Type was finished successfully, return code 0 7:57:14 PM #28 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 16x (22,160 KB/s) 7:57:14 PM #29 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:57:17 PM #30 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 7:57:17 PM #31 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Basically there is 2 things that I can see These are poor quality discs, try Verbatim or Sony (made in Japan) Burning way too fast slow burn to 4X
I apperciate the help, though I don't think the discs are the issue...I say that because I'm in the middle of the spool and the discs Ive been using out of it worked out fine. I'll try a slower speed
tried 4x like suggested: David Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0B - HA 1 TA 4 - 7.8.5.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <ME3114C AES560H >Version: 1.0 - HA 1 TA 2 - 7.8.5.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800AB-60CBA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 1 ID 0 DMA: On CdRomPeripheral : CyberDrv CW088D CD-R/RW atapi Port 1 ID 1 DMA: On CdRomPeripheral : ME3114C AES560H 1.0 amttzamk Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1H E: CDRom4 CyberDrv CW088D CD-R/RW F: CDRom1 ME3114C AES560H G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 596MB (611024kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.10.2007 Burn DVD Image 11:08:12 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:08:12 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4653154304 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <D:\daria.nrg> 11:08:12 PM #3 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 11:08:12 PM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2272047 (504:53.72, 4437MB) 11:08:12 PM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 11:08:12 PM #6 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 11:08:12 PM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:08:12 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2272048 (2272048) = #2272048/504:53.73 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2272048 blocks [E: LITE-ON DVDRW LH-20A1H] -------------------------------------------------------------- 11:08:12 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4653154304, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2272048 | 0 | 0x00 2272048 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:08:12 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:08:12 PM #11 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 11:08:12 PM #12 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 11:08:12 PM #13 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 11:08:12 PM #14 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 11:08:12 PM #15 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 11:08:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:08:12 PM #17 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 11:08:12 PM #18 Text 0 File DVDR.cpp, Line 6977 Drive: LITE-ON DVDRW LH-20A1H Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:08:12 PM #19 CDR -1207 File DVDR.cpp, Line 6356 Book Type automatically set to: DVD-ROM 11:08:12 PM #20 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 11:08:12 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 11:09:05 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x00000000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11:09:05 PM #23 CDR -1135 File Writer.cpp, Line 303 Write error E: LITE-ON DVDRW LH-20A1H 11:09:06 PM #24 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 11:09:06 PM #25 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 0 11:09:06 PM #26 Phase 129 File dlgbrnst.cpp, Line 1762 Generating DVD borders completed successfully 11:09:06 PM #27 Text 0 File DVDR.cpp, Line 6977 Drive: LITE-ON DVDRW LH-20A1H Book Type request [LO], rev 3: DVD+R Changing the Book Type was finished successfully, return code 0 11:09:07 PM #28 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5,540 KB/s) 11:09:07 PM #29 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:09:10 PM #30 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 11:09:10 PM #31 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi zanev, There could be another thing to look at in situations when you can burn CDs but not DVDs and vice versa. The laser write heads are two separate heads for DVDs and CDs. One of them may be gone :-( It's from my own experience from the past. So, try to write with the Software other then Nero as a first check investigating such behavior. My regards
Heres something you should read about memorex discs http://forums.afterdawn.com/thread_view.cfm/262544
