I have 3 questions about Nero, VOB, IFO and BUP Files. I looked at the first VOB file in the folder.. and it is the movie with directors commentary. I read on the net, that VOB, IFO, and BUP are streaming, and the real movie audio is there, i just cant hear it if i try to play the VOB file. 1. Is this true, is the real aduio of the movie there or..? 2. If it is, how do i burn these using Nero? 3. I normally burn with dvix, I can fit 6 movies on a disc. but they arent readable via dvd players cuz i make it into a datadisc, how do i get the movies in dvd form, instead of datadisc form?
Use the GLOSSARY tab above and you will get the definitions of VOB, IFO, BUP files! Then you will know the answers to your first question. These are DVD compliant files. Another words, these files on a DVD will play in players. This is not a data DVD ..... it's DVD compliant which will play properly on standalone DVD players and alike. You can use Nero Recode to fit your DVD titles on a DVD! Here is a guide for you: guide for Nero Recode .. multiple movies: http://www.dvd-guides.com/content/view/44/59/ you can also use Shrink: guide for shrink ... multiple movies: http://webpages.charter.net/bacitup/TheG...VD Shrink.pdf DviX is a different format..... and the files are smaller so you can fit more onto a DVD by burning as a Data DVD. If you are going to fit movies on a DVD compliant disk then you have to consider quality. Fitting more than 2 movies on a disk will lower your quality considerably. I wouldn't put more than 2 titles on a disk.
thank you that first link you gave me is steps for my folder of VOB, IFO, and BUP files correct? As for my other avi's, i found a thread here on afterdawn that tells how to convert them to DVD. http://forums.afterdawn.com/thread_view.cfm/272946
yes you will have to convert your AVIs to DVDs by using Nero Vission: http://forums.afterdawn.com/thread_view.cfm/356114 this is a nice guide by Gwendolin! just checked your link..... you have the Alkohol guide ...... perfect!
the alcohol guide is missing a few images.. probably a few minor, yet important steps.. in those images..
the Alkohol guide is perfect and used all the time! check out the Gwendolin guide ..... gave you the link.
Alkahols guide caught my eye right away when i seen the topic. there are a few images in it not loading tho.. i dont know what to do for those steps.. Gwendelins guide is really bare bones but good too. So, using either one of those methods, which are basically the same thing, i can only have like 2 movies per dvd?
thanks man... heres an update.. i made a dvd disc with the vob files.. i used Nero recoder 1 working great beav! but on converting avi's to dvd disc.. im having a little trouble. I followed alkohols guide step by step.. and on the burning screen(wheather im burning to disc or to hard drive)It takes forever to burn... i mean, its like stuck on the burning screen... Over 2 and a half hours went by and neither progress bar had even 1% done.. While the top of the screen stil showed Creating Menus and Trancoding Streams Burning project onto the disc(or hard drive) I tried both methods.. Now one mistake i made is the 2 movies go over my alotted space.. one movie is 717mb and the other is over 900mb. I figured i would use Nero Recoder to encode the dvd later. before my final burn. So im not sure what the problem is.. I didnt bother changing the video quality.. should I? And should i go dvd-5 4000mb or dvd-7 8000mb? or whatever the numbers are...The 2 movies dont fit in 4000mb, but they do fit inside of the 8000mb choice. I also seen i can make a custom size.. like 5,170mb if i wanted, so not sure where im messing up almost all programs are closed.. except nero indexing services.. nero BGmonitor and the nero startsmart. What could it be.. Does it take over 2 hours for not even 1% progress? Does it depend on my computers speed and memory? I keep think it is freezed up but i can bring up task manager really quick. I have plenty of free hard drive space for the temp file also, as in the past, that problem plagued me thanks, Sleepless in Seattle
why don't you post a Nero log..... this way we can see what's going on..... and don't forget to take out your serial #s... don't post that!
What version is your Nero? Is it 6.6.0.18 or 7.0.1.4? Can you post your Nero's error log by chance? To get the very last section of your Nero logs, go here: c:\Programs Files\Ahead\Nero\NeroHistory (for Nero 6 Ultra), or C:\Programs Files\Nero\Nero 7\Core\NeroHistory (for Nero 7 Ultra). Now just EDIT out your Nero serial before you're going to post back here. I have Nero 7, so it is under C:\Programs Files\Nero\Nero 7\Core\NeroHistory right? I looked in that folder.. i dont see anything... Perhaps i didnt save a log? no error msges came up either...
ok, i was able to get them to start transcoding or whatever in the burn process..(dont know what i did but they started to work)...until all of a sudden Nero Vision crashes...??? I tried it 3 times.. nero Vision crashes each time UPDATE: I did a file search for NeroHistory and it is found in(for me at least with Nero 7) C:\Documents and Settings\MyWindowsProfile\Application Data\Ahead\Nero Burning Rom Here is my Nero Log.... ====== *** Nero Burning ROM, History File *** ====== My Name My Computers Name A.bunch.of.weird.numbers Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.10.1.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SHW-160P6S E: CdRom0 Generic DVD-ROM F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 22020096 (0) Byte BUFE : 0 Physical memory : 111MB (114156kB) Free physical memory: 19MB (20300kB) Memory in use : 82 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.7.2007 ISO compilation 5:03:27 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:03:45 PM #2 Text 0 File Isodoc.cpp, Line 6666 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:03:46 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 5:03:46 PM #4 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 5:06:13 PM #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 996687 (221:29.12, 1946MB) 5:06:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:06:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-RW Disc Manufacturer: CMCW02 - Disc Application Code: 64, Disc Physical Code: 214 5:06:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= This disc is not empty. (Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL.) VMS. Disc was erased successfully. Accessing disc... (Medium in drive: DVD-RW. Medium required by compilation: DVD R/RW, DVD R DL.) 5:06:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 996688 (996688) = #996688/221:29.13 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 996688 blocks [E: LITE-ON DVDRW SHW-160P6S] -------------------------------------------------------------- 5:06:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2041217024, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 996688 | 0 | 0x00 996688 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:06:14 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 5:06:14 PM #12 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 5:06:14 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 5:06:16 PM #14 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 5:06:16 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 5:06:16 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 2x (2,770 KB/s) 5:06:16 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:06:17 PM #18 Text 0 File DVDR.cpp, Line 3225 Recording mode: Restricted Overwrite Mode 5:06:17 PM #19 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 5:06:17 PM #20 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 0.9x (0) Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ? Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 0 h (?) End Sector Number in Layer 0: 0 h (LBN: 0 h, 0 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:06:17 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 21976000 5:09:17 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 01 E0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x08730400: Len x10000 0xCA FB D0 F0 84 C8 EA 71 EE 4C 8C 7B F3 4F FC F9 0xD1 1A 25 11 4F 7F EF 92 F4 DC FD 3F 86 D3 44 74 0x3C 69 C2 30 4C 4C E9 DF 2B 3D 26 93 29 35 4C 80 5:09:17 PM #23 CDR -1135 File Writer.cpp, Line 303 Write error E: LITE-ON DVDRW SHW-160P6S 5:09:20 PM #24 Phase 133 File dlgbrnst.cpp, Line 1762 Writing short lead-out 5:11:06 PM #25 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 479 (1DFh)Close Session/Border, function 2, finalize disc: NO, ret: 0 5:11:08 PM #26 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 2x (2,770 KB/s) 5:11:19 PM #27 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:11:21 PM #28 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 5:11:22 PM #29 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== Hope this helps....
enable your DMA: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues firmware update to PSOB: http://forum.rpc1.org/dl_firmware.php?download_id=2175 Use better media....I suggest along with your firmware update on your drive you should use MIJ media (made in Japan). Taiyo Yuden, Verbatim are the best! you'll be surprised at how many problems go away when you use better media! you don't have much memory and you are using 82% of it up! No wonder Nero crashes on you! go to the Task Manager and shut down all unnecessary tasks and programs running in the background, no multi tasking, no internet and even shut off your anti-virus programs while burning! Adding more RAM would be nice! do these changes and Nero will work better for you! good luck!
ok i fixed the dma issues.. and yesterday morning i made a dvd... very cool thank you i found that Nero Vision does crash stil from time to time, thanks to our computers low memory.. but as long as i watch task manager, and make sure all programs are closed, and 1 pesky(program/spyware, trojan/malware helpdesk/center likes to popup from time to time all by itself.) So i have to keep an eye on task manager and close it if it starts to run and uses all the memory... My first dvd works like a charm... My second dvd, not so well... I took 2 tries thanks to helpdesk randomly running at odd times...but i got done with it. The second dvd has 2 movies and a menu with picture and a 3 minute wav that plays in the menu. The dvd makes a weird sound as it spins... Spinning constantly because of the wav that plays.. im assuming.. Next time i wil leave animation and audio out of the menu for better playback performance.. I also used super glue to put a label on the disc.. It is fit on there nice and tight and secure.. Would that possibly be making the weird sounds as it spins? It doesnt look like any of the paper is sticking up rubbing against the top of the players tray tho, so just a thought. And the playback of the actual movies is choppy in parts... Halpdesk popped up, and paused the burn for a sec..(my guess) and i did only 1 pass, on the first disc i think i did 2 passes.. but otherwise i finally can make dvds.. 2 movies on a disc only kinda sucks... but the first dvds quality cant be matched by my 6 movies on a disc data style...their quility sucks.. Thank you for the help!!!
YOur welcome and welcome to afterdawn..... It is highly recommended that you don't ADD labels to CD/DVDs as it will hinder the player from reading the disk. that's why you are getting pixelations and soon it will be freezing the player from reading the disk. if you want labels on your CD/DVD the best way is to buy the disks already printables and you can print right on top of the CD/DVDs straight out of the printer! You will have to buy a printer that has an attachment to put the disk on and it will print directly onto the disk. I have the Epson R320 and the R380 that prints onto the disks directly! here are some of my disks: they have shiny watersheild printables, white inkjet hub printables, and shiny silver printables ....take your pick!
another problem.. Nero keeps crashing while i try to burn discs. I had task manager open, and there was plenty of memory available at the time of the crash...I literally closed ALL programs(besides task manager)before starting the process. I even kept task manager open, to close any programs that like to randomly start running. I even unplugged the internet, and closed the firewall. Still, i should of enough memory, i have 112mb memory and Nero uses around from 30-60k tops, and at any one time there was around 80k being used. I fixed the dma issue with the primary and secondary thingies... here is my latest Nero History Log... nerohistory.log ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM NT-SPTI used Nero API version: 7.10.1.0 Using interface version: 7.5.0.1 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 10, 1, 0 Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 6 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 2 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SHW-160P6S E: CdRom6 Generic DVD-ROM F: CdRom1 Generic DVD-ROM G: CdRom2 Generic DVD-ROM H: CdRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 22020096 (0) Byte BUFE : 0 Physical memory : 111MB (114156kB) Free physical memory: 51MB (53204kB) Memory in use : 53 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.11.2007 NeroAPI 4:40:37 PM #1 Phase 111 File APIProgress.cpp, Line 285 DVD-Video files sorted 4:40:38 PM #2 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:40:55 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 4:40:56 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 4:40:56 PM #5 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 4:40:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2252095 (500:27.70, 4398MB) 4:40:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 4:40:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD+RW Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 1 4:40:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:40:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2252096 (2252096) = #2252096/500:27.71 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2252096 blocks [E: LITE-ON DVDRW SHW-160P6S] -------------------------------------------------------------- 4:40:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4612292608, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2252096 | 0 | 0x00 2252096 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:40:56 PM #12 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 4:40:57 PM #13 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-Yes (<32KB) 4:40:57 PM #14 Phase 24 File APIProgress.cpp, Line 285 Caching of files started 4:40:57 PM #15 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 4:40:57 PM #16 Phase 25 File APIProgress.cpp, Line 285 Caching of files completed 4:40:57 PM #17 Phase 36 File APIProgress.cpp, Line 285 Burn process started at 4x (5,540 KB/s) 4:40:57 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:40:57 PM #19 Text 0 File Cdrdrv.cpp, Line 9869 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RITEK... Media type ID: 004 Product revision number: 48 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #.œ.\.(.–Šp.(.œ. 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(...à.ð....... 4:40:58 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom6: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0xDF 00 0F 02 01 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 4:40:58 PM #21 Text 0 File DVDR.cpp, Line 7095 Drive: LITE-ON DVDRW SHW-160P6S Book Type request [LO], rev 3: DVD-ROM Changing the Book Type was finished successfully, return code 0, Mode 2 return code -1046 4:40:58 PM #22 CDR -1207 File DVDR.cpp, Line 6473 Book Type automatically set to: DVD-ROM 4:40:58 PM #23 Phase 98 File APIProgress.cpp, Line 285 Start formatting disc before burning 4:41:22 PM #24 Phase 100 File APIProgress.cpp, Line 285 Formatting disc was successful 4:41:22 PM #25 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 4:41:22 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 21976000 4:55:57 PM #27 Text 0 File WriterStatus.cpp, Line 113 <E: LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2252096 (225D40h), length 0 blocks 4:55:58 PM #28 Text 0 File DVDPlusRW.cpp, Line 900 Media-Format will be stopped after burning 4:55:58 PM #29 Phase 127 File APIProgress.cpp, Line 285 Generating DVD high compatibility borders 4:56:05 PM #30 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 2252096 4:56:05 PM #31 Text 0 File DVDR.cpp, Line 7095 Drive: LITE-ON DVDRW SHW-160P6S Book Type request [LO], rev 3: DVD+RW Changing the Book Type was finished successfully, return code 0 4:56:05 PM #32 Phase 37 File APIProgress.cpp, Line 285 Burn process completed successfully at 4x (5,540 KB/s) 4:56:06 PM #33 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:56:09 PM #34 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 4:56:09 PM #35 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 7/26/2007 5:06:18 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 7/26/2007 5:06:18 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== I also have a NeroVisionLog.txt, if you want to see that also but it is longer then the nero history file
To quote IHoes comments Also You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
I have Roxio? What is that? some spyware/malware? I'm fairly computer savvy, i know how to get rid of most spyware and stuff easily, i knew to erase my serial number from my post...unlike most ppl, and i can usualy fix most of my computers ailments... I've never heard of this program....Roxio, before coming to this website What is it? The download say i must uninstall roxio manually first, then use the zap program.. UPDATE: ok, it said it was uninstalling easy cd creator 4 and 5 I also defragmented the hard drive last night
I have a max of 111mb(128 actually, but the computer shows 111) During the transcoding and burning process, I have an extra 40-50 mbs of memory at any time... Nero only uses upwards of 60-68mbs. I close all other programs and watch the task manager, and even close the task manager if it uses too much memory. I defragemnted the hard drive and ran that roxio zapper, it said it was uninstalling easy cd creator 4 and 5.
