networking xbox

Discussion in 'Xbox - Hardware mods' started by rx7heaven, Aug 9, 2004.

  1. rx7heaven

    rx7heaven Guest

    ive just hooked up mycat5 cable to mp pc and set up all the ip address and stuff , but still no go just wont connect.In evoX dash says line status ..No link
     
  2. rx7heaven

    rx7heaven Guest

    is there a differents between a patch lead and a crossover cable please help
     
  3. mess1

    mess1 Regular member

    Joined:
    Jul 28, 2004
    Messages:
    142
    Likes Received:
    0
    Trophy Points:
    26
    There certinaly is, cross over is the one you will need.

    Cross over cables provide a cross-over (switching of two wires within the cat-5 cable) for you when you connect computer to computer. This tells the comptuers that there is a connection and they should try to talk.

    Normal cat-5 cable will not be crossed over because the router/switch/hub/repeater whatever you plug into will provide the cross for you.

    Hope this helps.
     
  4. iggi

    iggi Member

    Joined:
    Oct 18, 2003
    Messages:
    87
    Likes Received:
    0
    Trophy Points:
    16
    the crossover cable has 4 wires switched. Look at both ends and the orange pair and the green pair should be reversed. I've also just replied to a thread in the general forum giving a step by step guide to connecting pc to xbox.
     

Share This Page