Just brought a new Xecuter 3 Control Front Panel combo with LCD so decided to upgrade my 160Gb drive with a 300Gb disk at the same time. Ran the slayer setup on the new disk and installed the Evox dashboard, but then I realised that it has only formatted drive f: to 129Gb, E: 5Gb, C: 0.5Gb, G: 0Gb. Whats happened to the other 130+Gb. I'm running an Evox M8 v1.6 Bios. Using the same disk that I previously used when I setup the 160Gb drive. Tried to format G: using slayers to get the extra space back but no sucess. Any advice.
you have xecuter 3 in with wat bios do you have, the bank switch in the front of mine when the first switch is turned on it boots to evox but when i have the 2 switch it boots to the chip and i can change the boot settings and there is an option to turn on the g: drive i think is xecuter bios lets you do this
Try to format G within the Evolution X dashboard disc tools. Also make sure that G is enabled within the evox .ini
Thanks Problem solved, I ended switched bios to format G:, but I will try changing evox.ini file to see if that also works when I get chance. Thanks
Whoa, first off if you have an X3, what are you doing running evox M8 bios. Flash it with the bios that was BUILT for it, the latest X3 BIOS. Also you didn't have lba48 enabled on your M8 bios, that is why you didn't see all 300 GB. Flash that X3 bios (trust me it is THE best and most worked on BIOS in the scene with the most features, one of the best being XBL blocking) Other than that, awesome setup, I have same thing, only with Halo LE green. Also make sure you use Xbox Media Center and enable the LCD in its settings. That is what the LCD was MADE for too.
