New Digivox T

Discussion in 'Digital TV - UK & Europe' started by tom8358, Sep 16, 2009.

  1. tom8358

    tom8358 Member

    Joined:
    Feb 5, 2008
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hi,just Got digivox t and flashed it with the latest firmware digivox_ter_v3300.bin.When i do a scan it picks up nothing.The latest keys are set and EMU is on.The aeral set up is fine,i have a box t working fine on it.Is there a newer firmware for the latest Digivox?I have gone into manual scan and went up the channels and the signal indicator does not show anything.Any info greatly appricated.,cheers
     
    tom8358, Sep 16, 2009
    #1
  2. tom8358

    tom8358 Member

    Joined:
    Feb 5, 2008
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Sorted,needed the newest "Bin File"Found it.Thanks
     
    tom8358, Sep 16, 2009
    #2
  3. cactikid

    cactikid Active member

    Joined:
    Jun 2, 2007
    Messages:
    4,625
    Likes Received:
    23
    Trophy Points:
    68
    yes newest is v3330 because box has a new tuner.
     
    cactikid, Sep 16, 2009
    #3
  4. jackoooh

    jackoooh Regular member

    Joined:
    Feb 13, 2009
    Messages:
    425
    Likes Received:
    0
    Trophy Points:
    26
    hi guys,trying to put latest firmware on new digivox t i mistakenly put old firmware on when i try to update to new firmware the box goe from boot to chdl and seems to be stuck there any help guys appreciated.
     
    jackoooh, Sep 17, 2009
    #4
  5. jackoooh

    jackoooh Regular member

    Joined:
    Feb 13, 2009
    Messages:
    425
    Likes Received:
    0
    Trophy Points:
    26
    sorry just an update on above post
    when powered on this happens boot f-00 ua-c chdl
    tryed powerimg off and on with no joy it wont even let me into factory setting to remove old flash
    sorry for double posting/thanks........
     
    jackoooh, Sep 17, 2009
    #5
  6. cactikid

    cactikid Active member

    Joined:
    Jun 2, 2007
    Messages:
    4,625
    Likes Received:
    23
    Trophy Points:
    68
    chdl is a bad flash,factory reset will not remove it.
    put the v3330 into the loader,box powered off press download and power box on immediately it should take.sometimes you get it right first or twentieth time.
     
    cactikid, Sep 17, 2009
    #6
  7. jackoooh

    jackoooh Regular member

    Joined:
    Feb 13, 2009
    Messages:
    425
    Likes Received:
    0
    Trophy Points:
    26
    thanks a mill will do and let you know
     
    jackoooh, Sep 17, 2009
    #7
  8. jackoooh

    jackoooh Regular member

    Joined:
    Feb 13, 2009
    Messages:
    425
    Likes Received:
    0
    Trophy Points:
    26
    cactikid sorted thank you very much
     
    jackoooh, Sep 17, 2009
    #8
  9. DF23

    DF23 Member

    Joined:
    Sep 18, 2009
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Help need if possible, something similar
    [background] - I got a startup up kit for the old man, (aerial,downconverter,power supply,digivox T), set aerial up on roof and ran cable through convertor into box, set-up looks fine. But no signal,Level 0% & Quality 0%,it's pointing to Keeper hill.
    Brought box to my house and it works fine, firmware version is : V03-3.3000T. He's neighbour has same setup and he's is working fine.

    Any help is appreciated, my head in wrecked
     
    DF23, Sep 18, 2009
    #9
  10. jackoooh

    jackoooh Regular member

    Joined:
    Feb 13, 2009
    Messages:
    425
    Likes Received:
    0
    Trophy Points:
    26
    you may have blown the downconverter when powering up,why dont you swap youre neighbours one just to prove or youre power supply assuming you are powering the signal as you said you ran the lead from the aerial to the box did you bypass the power supply my guess if you did not its more than likely youre downconverter,we have all been there.
    good luck.............
     
    jackoooh, Sep 18, 2009
    #10

Share This Page