I recently purchased a sony external burner, model # DRX- 800UL. I have been ripping with dvd decrypter but it's only reading at 0.6x thats way to slow for a burner like this, my system is fairly new. Thanks in advance for any suggestions.
•Tip #1: Enable DMA DMA transfer is an option in modern drives which is an improved transfer method over PIO. With this enabled on both your hard drive and DVD-ROM drive, DVD ripping speeds can be significantly improved. •Steps to enable DMA (Windows XP) Right click on 'My Computer' on your desktop and select 'Properties'. Click the 'Hardware' tab and launch the 'Device Manager'. Press the '+' sign to expand the trees of both 'DVD/CD-ROM Drives' and 'IDE Controllers'. Double click your DVD-ROM drive, click the Advanced Settings tab and change the transfer mode to DMA if available. Repeat this step for the IDE channel which your hard drive is on. •Tip #2: Update Firmware Some DVD-ROM manufacturers purposely limit the DVD ripping speed of ther drives to try and prevent customers from making copies of retail DVDs. Normally, the limitation can be bypassed by flashing your DVD-ROM drive with an updated or hacked firmware (which also may allow you to make your DVD-ROM drive region-free). •Warning: Flashing your device's firmware can result in permenant damage of your DVD-ROM drive. DO NOT undertake this step if you are uncomfortable with the risk! You have been warned! •Tip #3: Re-install IDE Controller Many people have reported that re-installing their primary IDE controller gave them a boost in ripping speed. •Steps to re-install Primary IDE Controller (Windows XP) Right click on 'My Computer' on your desktop and select Properties. Click the Hardware tab and launch the Device Manager. Press the + sign to expand the tree of 'IDE Controllers'. Right click your Primary IDE Controller and select Uninstall. Now re-boot your computer, and Windows should automatically re-install your IDE Controller •Tip #4: Install Latest ASPI Layers This is a fairly gray area as some people have mentioned that they see a performance increase in ripping speed when ASPI layers are installed, while others have said the opposite.
it quite possible that it isn't the burner. I mean the movies that u are trying to rip could have a protection that dvd decryter is to old to pick up...try ising DVDFAB with the new version of anydvd running in the backgroung...
