Hello everyone, today i changed my cpu cooler to 9700led and after i assembled everything and tried to turn on the pc, all fans spin ( video, cpu, hdd, case and psu) led lights up but there is no post and no beep. i cant even go to bios because it wont post. PC is 2 weaks old. q6600, asus p5ql-e, 700w chieftec psu. What can this be? p.s. sorry for bad english.
Check the power connector to the processor is still securely attached (will be a 4-pin or 8-pin plugged into the mobo)
You didn't damage the CPU during the install? You will have had to remove the motherboard to install the backplate for that cooler, did you do that correctly? Is the graphics card securely seated and powered?
i didnt take out cpu. i just took off mb, then took off stock cooler. Cleaned old thermal, aplied new paste and attached new cooler. thats all... i conected everything. Now led comes on, fans are spinig and monitor shows "no signal". My hd4850 is inserted ant tightened with screw and conected with pci-e cable witch comes from PSU. Everythig is the same as before... p.s. i tried to turn on without GPU and both HDD disconected and nothing happened... :/
