Hi all, let me wish you a merry Christmas to start this day. I wanted to give a modded xbox to my sister for her Christmas, unfortunately I came across a problem which I am unable to solve and I would like some help. I bought myself a second hand xbox v1.6b and wanted to install the blue DUOX2 chip in it. So that's what I did. The problem is that when I boot the thing with chip enabled (boot with power button) it gives me a blank screen and no sound. When I boot with the eject button the screen is just fine Here is what I already tried to solve this problem: - I tested the soldering points by doing them again, 3 times (because that's what I was reading everwhere) - I tested the soldering points with a "multimeter" to see if the contact points were in contact - I tested the chip on my other xbox (1.6) and it worked fine - I flashed the chip with another BIOS (the one that is on the HACKDABOX flash CD and also with the M8plus_16.bin and the generic flash cd from eurasia) => the flashing was done by putting the chip in my 1.6 xbox, then flash it, and then return it to the 1.6b All those steps to come to the same result => blank screen and no audio. Does anyone has an idea on what I could do next to test it out?
